Availability
Showing In Stock Items. Show All 118 Items.
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 25 )
$1,249.95
—
$1,499.95
$1,123.95
—
$1,348.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 22 )
$1,649.95
—
$1,899.95
$1,483.95
—
$1,708.95
On Sale
Help your fuel injection system keep up on measured pressures with these Holley replacement pressure transducers. They include a wiring pigtail, are available for all Holley EFI fuel injection systems and come in different pressure ranges to suit your engine applications requirements.
( 48 )
$149.95
—
$212.95
$134.95
—
$191.65
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 15 )
$1,749.95
—
$2,549.95
$1,573.95
—
$2,293.95
On Sale
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 8 )
$1,349.95
—
$2,149.95
$1,213.95
—
$1,933.95
On Sale
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
$988.95
On Sale
Holley USB cables are sealed against dirty environments. These connector cables are designed to fit select Holley EFI systems. If your system's ECU is mounted in not-so-clean areas, use Holley sealed USB cables.
( 74 )
$80.49
—
$92.19
$72.44
—
$82.97
On Sale
Holley Terminator X Max Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Max Stealth 4150 systems provide transmission control for later model GM 4L60E and 4L80E transmissions.
( 3 )
$2,349.95
—
$2,749.95
$2,113.95
—
$2,473.95
On Sale
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 54 )
$1,249.95
—
$1,549.95
$1,123.95
—
$1,393.95
On Sale
Holley EFI Terminator X fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings. These injectors provide excellent linearity with no discernible "bounce" at low pulse widths as commonly found in other injectors. With a wide variety of fuel flow offerings from 42 lb./hr. to 220 lb./hr. you are sure to find an injector that matches your non-emissions-controlled application. Holley EFI Terminator X fuel injectors can also be used with any ECU that utilize high-impedance fuel injector drivers. Features: * PICO/EV6-style performance injectors are sold individually or in a set of 8 * High impedance for use with saturated drivers * Rated injector flow 220 lb./hr. at 43 psi of base fuel pressure * USCAR injector connector * 40mm O-ring to O-ring length * Compatible with many OEM LS intake manifolds * Easy to install in any Holley EFI Hi-Ram intake, using Holley fuel rail adapter kit
( 27 )
$71.29
—
$999.95
$64.16
—
$898.95
On Sale
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 19 )
$999.95
—
$1,399.95
$898.95
—
$1,258.95
On Sale
Holley Sniper EFI BBD master kits will be right at home on any powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power over the carburetor, but you can also gain timing control! Put an end to cold start issues, hesitations, vapor lock, and flooding—upgrade to Holley Sniper EFI. Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-86 Jeep CJs with 258 cu. in. 6-cylinder engines * Throttle body-mounted ECU--no extra boxes to mount * Supports up to 350 hp with two 100 lbs./hr. injectors * Only four wiring connections required—Battery +, Battery -, Switched ignition, and rpm * Internal fuel pressure regulator eliminates the hassle of plumbing an external regulator * Includes complete fuel system: 20 ft. of 3/8 in. vapor guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard: answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust; ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and stainless steel (weldable) oxygen sensor flange * Available in Classic Gold, black, shiny polished
( 10 )
$1,649.95
$1,483.95
On Sale
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 43 )
$95.05
—
$1,399.95
$85.55
—
$1,258.95
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,649.95
—
$1,949.95
$1,483.95
—
$1,753.95
On Sale
Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!
( 8 )
$1,949.95
—
$2,449.95
$1,753.95
—
$2,203.95
On Sale
Holley Terminator X Stealth 4150 2x4 EFI systems feature eight 100 lb./hr. fuel injectors capable of supporting up to 1500 hp naturally aspirated or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Features: * Bolt-on 2x4 4150 flange carburetor replacement * Internal 1bar MAP sensor, built into the Terminator X ECU External fuel pressure regulator required, set to a base pressure of 58.5 psi * Integrated ignition timing control * High-resolution, full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--answer a few questions about your engine, and it creates the base map, then starts tuning on its own without the use of a laptop * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and Fuel Pressure regulator, for years of dependable service * Weld-in oxygen sensor bung for the exhaust ensures a leak-free oxygen sensor install * Plug-and-play with Holley EFI accessories * Available in three finishes: Shiny, Black, and Gold
( 1 )
$3,049.95
$2,743.95
On Sale
These Holley replacement fuel injector wiring harnesses are replacements for the 8-cylinder injector harnesses. They connect the main harness to the injectors, routing the wires over the rail and making replacement a snap!
( 14 )
$149.95
—
$999.95
$134.95
—
$898.95
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$249.95
—
$365.95
$196.95
—
$288.85
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$119.95
—
$1,799.95
$65.95
—
$1,618.95
On Sale
Holley Sniper 2 EFI Power Distribution Modules (PDM) are cost-effective and optional accessories that isolate the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. The PDM also distributes power to your EFI fuel pump and a single fan (second fan can be ground triggered through the included input/output harness). Two additional 2-amp circuits can power low-current accessories like gauges or to trigger relays. Battery and a switched 12 V source are all that's required from your vehicle to power the PDM. Product details: * Provides conditioned Power, Ground and Switched connections for ALL components within a Sniper 2 EFI install. (Throttle Body, Fuel Pump, HyperSpark Ignition System, and Optional Fan) * 3 relay channels – 15 amp Powertrain (Sniper throttle body and ignition system) 25 amp - Fuel pump output – 25 amp fan output * LED status indicators, show you which channel is triggered at a glance * Removable cover for easy accessibility, with wiring diagram built into the lid, like a fuel panel
( 6 )
$189.95
$170.95
On Sale
Holley EFI fuel injector driver modules are ultimate solutions for methanol burning engines that require a large set of secondary injectors. These modules will have you in complete control of your fuel injected behemoth, featuring easily programmable injector current curves, injector test fire mode, two datalogger outputs, multiple peak, and hold current settings, plus more. Expand the capabilities of your current EFI engine with Holley EFI fuel injector driver modules and stay at the front of the field! Features: * Engineered specifically to add a secondary set of high peak current injectors when utilizing a Holley EFI Dominator ECU * Can be triggered by either negative or positive trigger to ease install in all EFI applications, be it a stock or aftermarket ECU * Eight easily programmable channels for precise injector control * Easy-to-wire Tyco Super Seal connector * Eight pre-programmed injector current curves * Peak current settings from 4 to 10 amps * Hold current settings from 1 to 2.5 amps * Peak hold duration settings from .5 to 1.0ms * Injector test fire program for quick troubleshooting while in the field * 8 RGB LEDs indicate proper operation, as well as log faults * Two outputs (Ground and 0 to 5 V) can be run to an ECU to datalog any injector faults * Pre-programmed in Position 7 for billet atomizer 325-800 or precision 500 lbs./hr. injectors
( 1 )
$619.95
$556.95
On Sale
Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies feature integrated throttle position, idle air control and intake air temperature sensors to work with your aftermarket multi-port EFI system. Their standard square bore mounting pattern is designed to fit perfectly on most intake manifolds and the stout 1,000 cfm can handle high horsepower with no problem. These units have a CFD computer-designed modeled air entry area--so maximum velocity and accelerated air speed are delivered to the engine. The high-flow idle air control passages are great for large cu. in. to aid in idle stability. Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies have an integrated GM 700R4 transmission kickdown location, as well as a kickdown lever for use with Ford transmissions. They feature all necessary vacuum ports, one timed spark, two 3/8 in. and two 3/16 in. full manifold vacuum ports. The 1.750 in. diameter throttle plates are mounted to PTFE-coated throttle shafts for high flow and smooth feel. Their high-quality die cast aluminum construction provides excellent strength while reducing weight, and they're offered in your choice of tumble polish or hard gray anodized finishes.
( 16 )
$599.95
—
$749.95
$538.95
—
$673.95
On Sale
Holley Sniper BBD 2-barrel fuel injection systems offer not only exceptional throttle response and outstanding power gains over a carburetor, but you can also gain timing management. Put an end to cold start issues, hesitations, vapor lock, and flooding. Enjoy all the benefits of EFI by upgrading to this Holley Sniper system—with performance and economical pricing Jeep owners want! Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-1986 Jeep CJ's with 258ci 6-cyclinder engines * Supports up to 350 hp with two 100 lb./hr. injectors * Throttle body mounted ECU (no extra boxes to mount) * Only four wiring connections required (battery+, battery- , switched ignition, and rpm) * Integrated ignition timing control * Simple calibration wizard * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Internal fuel pressure regulator (preset to 58.5 psi) eliminates the hassle of plumbing an external unit * Self-tuning ECU * OEM-style TPS/IAC and fuel pressure regulator * Bosch LSU 4.9 wideband oxygen sensor (provides real-time fuel map learn) * Clamp-on oxygen sensor kit and all hardware for installation
( 6 )
$1,349.95
$1,213.95
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$149.95
—
$415.95
$134.95
—
$373.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
