Availability
Showing In Stock Items. Show All 45 Items.
On Sale
These machined aluminum EFI fuel rails are capable of handling 1,100+ hp engines. They feature a large inner diameter bore to decrease fuel pressure drop and help cancel out back pulses.
( 54 )
$240.95
—
$415.95
$216.85
—
$373.95
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$799.95
$718.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 18 )
$1,749.95
—
$2,549.95
$1,573.95
—
$2,293.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,649.95
—
$1,899.95
$1,483.95
—
$1,708.95
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 110 )
$284.96
—
$469.46
$256.46
—
$422.51
On Sale
MSD Atomic EFI throttle position sensors are cable-driven mechanisms designed for LS throttle bodies—and they'll bolt to most aftermarket and factory intakes. These TPS/IAC kits are cast throttle body assemblies engineered to deliver consistent performance, utilizing the latest technology from high-quality materials for ultimate durability. MSD manufactures the fuel injection components to meet or exceed stringent industry standards.
( 3 )
$130.95
$117.85
On Sale
Holley Terminator Max X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * (4) inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * (4) Outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in 3 finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
Not Yet Reviewed
$2,749.95
$2,473.95
On Sale
FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 7 )
$1,111.99
—
$1,171.99
$1,000.79
—
$1,054.79
On Sale
Holley Terminator Max X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
( 1 )
$2,749.95
$2,473.95
On Sale
Holley Terminator X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
Not Yet Reviewed
$2,249.95
$2,023.95
On Sale
Holley Terminator X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories
Not Yet Reviewed
$2,249.95
$2,023.95
On Sale
Holley EFI Hi-Flow billet fuel rails offer flow capacity for high horsepower applications and billet aluminum construction that is machined and black anodized for great style under the hood. Laser-etched with the "Holley EFI" logo, the fuel rails feature a 5/8 in. diameter fuel passage, -8 ORB ports on each end, and an 1/8 in. NPT port for a fuel gauge installation if you choose to do so. Holley EFI Hi-Flow billet fuel rails are designed with the factory injector clip reliefs so that your factory injectors and retaining clips can be reused. This is important as the clips locate the injector radially for proper injector spray pattern onto valves. The kits include fuel rails, mounting brackets, and required mounting hardware.
( 3 )
$232.95
$209.65
On Sale
The FiTech Ultimate LS EFI 500 HP fuel injection system with long runner cathedral intake kit comes with an intake, 92mm throttle body, LS3 coil packs and a transmission controller. FiTech self-tuning induction systems for LS engines are designed for the do-it-yourself hot rodder! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. The Ultimate LS ECU has the ability to control the shift points, shift firmness, downshifts and all other features involved when controlling the transmission. This feature is suitable for 4L60, 4L65, 4L80 or 4L85 transmissions. FiTech's Ultimate EFI is a complete kit. Check out the list of features and you will wonder why it's never been so simple to ditch that old factory hardware or top off that fresh long block. FiTech has taken the work out of getting your LS up and running in a flash. That's why FiTech calls this the Ultimate EFI system.
Not Yet Reviewed
$2,320.99
$1,856.79
On Sale
Fitech introduces the all-new Go EFI Classic fuel injection systems in a stunning carburetor gold finish. Fitech EFI re-captures the old-school look while maintaining its innovative, award-winning patented design—eliminating cold start issues, hesitation, vapor lock and flooding. This innovative system hides the injectors and has an externally mounted ECU, so it can be mounted wherever you want to ensure a true carburetor look is maintained. The Go EFI Classic is a self-tuning fuel injection system rated for up to 650 hp. The more you drive the more it adapts to your personal style—perfect for your everyday driver, weekend Street Machine, or Bracket Racer. Additional features: * Dual bolt pattern; designed to fit both the spread bore and 4150 square bore flange * Integrated ignition timing control and coil driver * High-resolution, full-color touch screen for setup, tuning, and gauge display * Bosch LSU 4.2 wideband oxygen sensor for real-time fuel mapping * Clamp-on oxygen sensor kit for leak-free installation * High-flow aluminum throttle body with 45mm diameter venturi to increase airflow * Designed for use with original distributor, factory throttle linkage, and most four barrel manifolds
( 4 )
$1,144.00
—
$1,297.99
$972.40
—
$1,103.29
On Sale
FiTech Ultimate LS EFI 1,000 HP fuel injection systems with 102mm throttle body are a complete self-tuning induction system designed for everyone from the do-it-yourself hot rodder to the professional EFI tuner! These Ultimate EFI intake manifold kits are ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. So, you can forget about sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU's from another unknown tuner source. FiTech has you covered with these complete kits, and they've taken the work out of getting your new or pull-out LS up and running in a flash! Small Block V8 GEN III/IV LS-based Chevrolet street and performance engines with a 1,500-6,500 rpm power-band up to 1,000 hp to the flywheel and contains a 3-bar MAP sensor for power adder applications that supports up to 30 psi of boost. Additional product features: * Low-profile, 102mm inlet, fabricated 3mm thick aluminum sheet metal TIG-welded intake manifold with 1,500-6,500 rpm power-band up to 1,000 hp to the flywheel and contains a 3-bar MAP sensor for power adder applications that supports up to 30 psi of boost * Billet fuel rails with AN fittings and fuel crossover * Self-learning ECU with touch screen controller for easy setup and configuration * Sequential fuel and spark control with individual cylinder trim * Dual Bosch wideband with dual trim control (self-learning) * 3-bar MAP sensor automatically detects up to 30 psi boost * Stainless oxygen sensor bung (clamp or weld-on) * 24X and 58X crank and cam compatible * Two programmable fan control outputs * TPS–IAC Sensor * Tach output driver for most tachometers (5 V) * Output driver for most speedometers * On-the-fly programmable target AFR and timing (if desired) * 80 lbs./hr. flow-matched injectors * Fuel pump relay output * Custom wire harness (uses factory coil pack sub harness) * Knock sensor control Note: This kit is not carb approved for use on emission-controlled vehicles. It is not legal for use on pollution-controlled vehicles. This system is designed to control the EFI and ignition on LS-based engines being retrofit into older vehicles that do not require emission controls.
( 1 )
$2,245.00
—
$2,689.00
$1,796.00
—
$2,151.20
On Sale
FiTech Easy Street 600 hp EFI system Force Fuel/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.
Not Yet Reviewed
$1,484.99
—
$1,546.99
$1,336.49
—
$1,392.29
On Sale
FiTech Retro LS TBI 650 hp system inline pump/regulator fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Retro LS master kits pair the TBI an in-line pump kit and Tight Fit regulator with gauge. The inline kit is supplied with a heavy-duty 255 lph external pump suitable for engine producing up to 600 hp, 40 ft. of high-pressure fuel hose, two fuel filters, fittings, mounts, and clamps. The Go Fuel Tight Fit regulator allows you to set the fuel pressure precisely where your EFI system and engine require. It can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port.
Not Yet Reviewed
$2,166.99
$1,950.29
On Sale
Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.
Not Yet Reviewed
$2,007.99
—
$2,745.99
$1,606.39
—
$2,196.79
On Sale
MSD Atomic AirForce throttle body adapters are designed to attach an OEM LS1/LS6 factory throttle body to an MSD Atomic AirForce polymer intake manifold. They're made from quality materials and install onto the MSD Atomic AirForce with no modifications.
( 1 )
$77.85
$58.39
On Sale
FiTech Ultimate Rebel LS cathedral intake manifolds with fuel rails enhance the performance of LS engines equipped with cathedral port cylinder heads. The manifold optimizes airflow and ensures consistent fuel delivery, resulting in improved engine efficiency and power output, while the fuel rails provide a consistent fuel delivery solution. Paired under the hood they provide a perfect fusion of aesthetics and performance. Features: * Precision-engineered cathedral port design for optimal airflow * Integrated fuel rail mounting points for a clean installation * Designed to improve air velocity into the cylinder heads * Engineered to increase the volume of air entering the engine * Compatible with factory or aftermarket fuel lines
Not Yet Reviewed
$549.00
$466.65
On Sale
AEM CD-7 plug-and-play adapter cables make CD dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. For CD dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!
( 1 )
$40.28
$22.15
On Sale
FiTech Easy Street 600 hp EFI system/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel universal in-tank pump modules—340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,321.99
—
$1,382.99
$1,189.79
—
$1,244.69
On Sale
FiTech Retro LS TBI 650 hp system Force fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. FiTech master kits provide a fuel delivery system and in these kits you'll have either a Go Fuel Force Fuel or Mini Force system. The Force Fuel supports the demands of an 800 hp engine on gas and features a 1/2 gallon reservoir, an internal 340 lph pump with a serviceable 10 micron fuel filter, and an internal regulator that keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. The Mini Force is great for cramped engine compartments and supports up to 600 hp. It is equipped with an efficient 255 lph pump and an internal regulator. Both systems are supplied with high-pressure fuel hose, return line fitting bung, and a liquid-filled gauge. Choose the FiTech Retro LS master kit with your preferred fuel delivery system.
Not Yet Reviewed
$2,136.99
—
$2,197.99
$1,816.44
—
$1,978.19
On Sale
FiTech Retro LS TBI 650 hp system regulated in-tank fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, FiTech Retro LS master kits pair the TBI with either a 255 or 340 lph Go Fuel in-tank regulated pump. Both offer a simplified single line system with a depth of 6 1/2 to 15 in., making them suitable for most EFI-ready tanks. They also feature a -6 AN pressure port and a 4 bar (58 psi) regulator. Choose the master kit with your preferred fuel delivery system.
Not Yet Reviewed
$2,024.99
—
$2,034.99
$1,822.49
—
$1,831.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
