Availability
On Sale
Stillen offers a wide range of performance parts, including the Trupower air intake scoops for a variety of vehicle makes and models. The factory air intake system on various Chevrolet Silverado/GMC Sierra vehicles is a very unique and creative design. There is no natural path for the air to flow through. The air must travel up the face of the radiator in order to make its way into the air intake opening. Keep in mind the radiators operational temperature is 180-220 degrees—significantly higher than ambient. To solve the issues with this otherwise, fantastic design the team at Stillen created a proper scoop—the Trupower, which lowers the base of the radiator shroud to be in line with the top bar of the vehicle's grille. This design allows for air to come directly into the intake system without being warmed by the radiator or disrupted by lattice type material in the radiator shroud, which eliminates the pre-heating and turbulence caused by the factory system. Order the model designed for your vehicle. Features and benefits: * Direct cold airflow * Reduced (intake) air temperatures * Textured finish for OEM fit and finish * Compatible with air intake or supercharger that uses factory air intake scoop * Easy installation
( 3 )
$211.37
$190.23
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$219.95
—
$499.95
$197.96
—
$449.96
On Sale
Flowmaster Delta Force cold air intakes are the elite kits you can call upon to help attain maximum performance and efficiency for your vehicle. All systems feature ultra-trick looking durable cross-linked polyethylene intake tubes with a large high-flow conical shaped air filter ensuring it will trap more dirt/dust particles than the typical filter. They are highlighted with Flowmaster logos to show others you're serious about quality and performance. Installation is easy utilizing factory mounting points. Take "operation cool airflow" to the next level with the addition of Delta Force cold air intake kits. Flowmaster Delta Force cold air intakes feature: * Roto-molded cross-linked polyethylene (XLPE) high-flow intake tube * Custom-designed black powdercoated air dam with foam rubber seal * Reusable/cleanable air filter * Multi-layer reinforced silicone couplers * Anodized aluminum fittings * Stainless steel hardware * No tuning required
( 8 )
$368.95
—
$549.95
$202.95
—
$302.95
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$209.95
—
$719.95
$188.96
—
$647.96
On Sale
Summit Bucks
Boost Products USA polished aluminum elbows are already beaded to allow an easy connection with silicone hoses. With these mandrel-bent 45 or 90 degree elbows, air charge piping or intakes are easily constructed. The elbows are also very suitable for welding with their 1.5mm wall thickness. They're available in a wide range of lengths, air intake tube diameters and radius sizes.
Not Yet Reviewed
$17.34
—
$69.85
$15.61
—
$62.86
On Sale
Summit Bucks
Boost Products USA silicone couplers are reinforced with textile layers to be extreme pressure resistant, and also to vacuum in your Air Charge System. The hose tubing couplers are suitable for your intercooler system, intake system, water lines or similar, as they can withstand up to 5 Bar and temperatures up to 220 degrees C (not to be used as fuel or oil line). Boost Products silicone hoses have achieved, and many times even exceeded the quality of silicone hoses, compared to ones made by other well-known manufacturers in quality tests. The silicone is durable and flexible, stable, and color-proof for many years. As a matter of fact, lots of well-known companies in the tuning and motorsport areas have come to rely on these quality hose silicone couplers by Boost Products.
( 3 )
$1.99
—
$78.24
$1.79
—
$70.42
On Sale
Summit Bucks
Boost Products USA silicone hump couplers are reinforced with textile layers to be extreme pressure resistant, and also to vacuum in your Air Charge System. Suitable for connections to intercooler pipes and lines, and water lines, the silicone hump couplers can withstand up to 5 Bar and temperatures up to 220 degrees C (not to be used as fuel or oil line). These quality hose couplers are designed with a hump in the middle, which allows the connector to bend or to stretch. This results in a bendable flexibility, which is highly recommended for throttle valves or intercoolers connected to the vehicles body, and similar connections. The silicone is durable and flexible, stable, and color-proof after many years. Matter of fact, lots of well-known companies in the tuning and motorsport areas rely on these quality silicone hump couplers by Boost Products.
Not Yet Reviewed
$15.69
—
$54.71
$14.12
—
$49.24
On Sale
Stillen offers a wide range of performance parts for a variety of vehicle makes and models, including the Trupower air intake kits. The Trupower air intake kits are designed to increase the airflow coming into the engine while also dramatically reducing air intake temperatures. Trupower air intake systems by Stillen feature a replacement radiator shroud and intake duct that brings cold air from the front of the vehicle through the truck's core support and into a large airbox. This innovative design takes advantage of the vehicle's factory air intake opening while also adding more airflow through the true cold air intake port. In addition to a significant reduction in air temperature, the Trupower cold air intakes by Stillen increases horsepower and torque. Made from high-quality materials, each kit is designed to be easy to install, often without requiring any modifications. Some kits may include a block off plate, free-flow tube system and/or a straight or free-flow coupler, depending on your application needs. Order the kit designed for your application needs. Upgrading your vehicle's air intake can provide several benefits, including: *Achieves ambient air temperatures faster than any other intake on the market * Achieves ambient air temperatures 60 seconds faster than factory air intake * Achieved 20+ hp increase +20 Torque increase—horsepower will vary per vehicle * Easy installation- no cutting/modifications required * High-quality Stillen air filter
Not Yet Reviewed
$406.84
—
$448.04
$366.16
—
$403.24
On Sale
Holley throttle body intake elbows feature a dual throttle body bolt pattern, and fit any intake manifold with 4150 or Dominator mounting flange. They also have a 105mm throttle body opening and a 100 degree mounting angle with slotted mounting holes. Constructed from cast aluminum, they include a MAP sensor port cover, gaskets, and hardware.
( 13 )
$799.95
$439.95
On Sale
COBB Tuning SF Intake systems remove a pre-turbo restriction in the stock intake system. They provide great power gains when combined with custom mapping on your Accessport tuner. To maintain optimal air flow, SF Intake systems utilize several unique features such as a custom conical cloth air-filter element and a computational fluid dynamics (CFD)-designed velocity stack. Tuned or stock, with the addition of a SF Intake system turbocharger induction noise and bypass valve venting sounds are much more audible. COBB Tuning SF Intakes were designed to be easy to install without having to modify your car. Installation requires no cutting or trimming of any components and can be completed with simple hand tools. Simply remove the stock air box and bolt the SF intake into place in just minutes. Additional attributes of COBB Tuning SF Intake systems (varies by model): * Temperature-resistant composite construction; saving weight and reducing heat transfer * Integrated velocity stack * Integrated airflow straighteners * 4-ply steel-reinforced silicone post-MAF tubing (where applicable) * Pre-oiled, cleanable, reusable, custom filter element * Air boxes are available for most applications (sold separately) * COBB Tuning off-the-shelf (OTS) maps for the Accessport make SF Intake installs easy: bolt it in, flash, and go IMPORTANT NOTE: Some SF Intakes REQUIRE tuning to ensure the MAF sensor reads properly and the engine operates within safe parameters. Check your application carefully.
( 3 )
$260.00
—
$765.00
$234.00
—
$688.50
On Sale
COBB Tuning SF Air Boxes add the benefits of a cold air intake to the outstanding performance of COBB SF Intakes. These air boxes enclose the SF Intake so hot engine bay air that robs horsepower is prevented from entering the intake system. Their unique design also separates rainwater from the intake air, eliminating the water ingestion issues that plague in-fender cold air intakes. Features of COBB Tuning SF Air Boxes: * Available for a variety of makes and models * 16-gauge aluminum construction * Powdercoated finish * Riveted COBB nameplate * Where possible, OE snorkel feeds cold air to the air box * Stainless steel hardware * OEM-quality fit and finish
Not Yet Reviewed
$205.00
—
$325.00
$184.50
—
$292.50
On Sale
Summit Bucks
Boost Products USA aluminum joiners are perfectly suited for the connection of silicone hoses, and when used in conjunction with Boost's HD-clamps, you will have the perfect symbiosis. These straight tubing couplers are available in a variety of lengths and inlet/outlet diameters. Select the ones needed for your project. Please note: Boost silicone hoses have a good tolerance, so even 1 to 2mm smaller or larger silicone hoses will fit on the connector. As a general rule: diameter Boost Products silicone hose (inner) = diameter aluminum connector (outer).
Not Yet Reviewed
$6.35
—
$27.81
$5.72
—
$25.03
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$549.95
—
$1,499.95
$399.95
—
$1,124.95
On Sale
XDR Performance air intakes contain high-quality components with a custom look, and offer an easy install without any cutting, drilling, or special tuning necessary. Available in two different kits, one features a crosslinked polyethylene (XLPE) tube and the other a silicone tube. Both deliver high-flow, maximum performance, and great style for your Side x Side. Both kits also include a serviceable, high-flow, 8-panel cotton gauze filter for long life and increase airflow, plus a pre-filter wrap to keep the filter clean when used in dusty environments, stainless steel hardware, and black anodized aluminum fittings. And, of course, XDR's Performance air intakes are backed by their Lifetime Limited Warranty.
Not Yet Reviewed
$269.95
$148.95
On Sale
Upgrading your vehicle's restrictive stock air box with Stillen air intake kits will allow for increased airflow, which can help your engine breathe better and more efficiently. Air intake systems, also referred to as cold air intakes, are popular performance modifications that can be installed on many vehicle classes, ranging from high-performance sports cars to hard-working diesel trucks. These air intake kit components are designed to replace your vehicle's factory intake assembly with aftermarket intake tubes, air boxes, and filters to overcome restrictions in the intact tract, thus allowing more air to enter the cylinders. With an air intake kit by Stillen, you can expect to see a positive effect on horsepower, torque, and acceleration, as well as improved fuel economy—and that makes Stillen's air intake kits your best dollar-per-horsepower investment by far! Upgrading your vehicle's air intake can provide several benefits, including: * Improved fuel economy—cold air intake systems can improve your vehicle's air-to-fuel ratio, which can lead to better gas mileage. * Better acceleration, cold air intake systems can improve your vehicle's responsiveness and acceleration speed * Increased airflow—upgrading your air intake can allow for increased airflow, which can help your engine breathe better and more efficiently * Enhanced engine sound—increased airflow can create a sought-after engine roar * Better air filter life—aftermarket air intakes often come with washable, reusable air filters that can last longer than standard dry filters * Reduced engine wear—increased airflow can reduce wear on your engine * Engine longevity—upgrading your air intake system can enhance the longevity of your engine
Not Yet Reviewed
$288.50
—
$643.74
$259.65
—
$579.37
On Sale
COBB Tuning SF intake and air box systems are the ultimate combos to provide your vehicle with the coolest air and lots of unrestricted flow. And of course, the more cool air your engine breathes, the better it will perform. COBB SF intake/air box systems are offered for a range of applications—from Subaru, Mazda, and Mitsubishi … to Ford and Volkswagen. All include air box and/or air box lid, air filter element, various aluminum and/or silicone tubing, clamps, and hardware (exact contents will vary by application). Order the model recommended for your vehicle.
Not Yet Reviewed
$495.00
—
$575.00
$445.50
—
$517.50
On Sale
Get more performance from your Steeda air intake kit! These replacement air intake tubes are molded from high-quality ABS plastic or aluminum, with a smooth inside surface to increase the velocity of incoming air. They allow for colder air induction temperatures, resulting in less heat soak and lower air charge temperatures. The tubes are available in a variety of configurations for fitment on Ford vehicles from 2005 and up.
( 3 )
$144.95
$130.46
On Sale
APR open carbon fiber intake systems feature a beautiful carbon fiber air dam that directs fresh air into a massively oversized 7 in. cotton filter with frontal inlet. They include thick T304 stainless steel heat shields and air buffer gaps on the back of the carbon fiber shell to reject heat from the engine bay. Doing away with the airbox completely solves the dramatically undersized, power-robbing inlet restriction that's glaringly apparent at higher horsepower levels on the factory system. The 4 in. inlet is compatible with the factory inlet or the upgraded APR Ultracharger System, and efficiently creates an uninterrupted airflow path into the supercharger for maximum results. APR open carbon fiber intake systems are the ultimate air intake solution for your 3.0 TFSI. Features, items, and specs: * Drop-in open system installs in minutes * Flow bench gains up to 268 cfm at 28 in. of water column over stock * Average of 17 AWHP at stage 2+ (93 octane) more than factory system * Extremely precise fitment * Massive airflow improvements * 502 total cfm at 28 in. of H2O stock * SAI breather filter * Billet aluminum mounting feet * Billet aluminum 4 in. flange adapter
( 1 )
$549.95
$399.95
On Sale
COBB Tuning turbocharger inlets replace your restrictive, so-so looking factory hose with increased performance and style. They feature silicone construction that rejects high engine bay temperatures and keeps the intake air closer to ambient temperature. The steel wire-reinforced design eliminates the issue of hose collapse that other inlet hoses suffer under vacuum at peak demand—yet allows adequate flex between the engine and the intake to prevent any connection separation. Take the open path to greater efficiency and power; increase the airflow delivery to your turbo with high-flowing COBB Tuning turbocharger inlets. They're available in various sizes for specific vehicle and engine applications. Additional features may include: * Multi-ply (4 or 5-ply, depending on inlet chosen) steel-reinforced silicone * Many are direct OEM replacements or are designed to work with stock and stock-sized intakes * Most are available in Stealth Black or COBB Blue
Not Yet Reviewed
$165.00
—
$230.00
$148.50
—
$207.00
On Sale
Over time, factory air intake hoses become brittle and crack. Plus, many of them are arguably some of the most aesthetically challenged OEM parts in the engine bay. Replace leak-prone factory hoses with COBB Tuning air intake hoses that feature 4-ply silicone construction with the right compliance to deal with the violent motions of high performance engines being driven in anger. They balance form and function with their smart appearance and turbulence-taming slick interiors. COBB Tuning air intake hoses also feature: * Drop-in replacement for OE hoses that stay put and look great * Sleek exterior is easy on the eyes * Decreased turbulence in the intake tract is airflow friendly * Pad-printed COBB logo * Select applications include lined worm-drive clamps * Steel-reinforced post MAF hoses won't collapse at full throttle * Available to fit stock or aftermarket intercoolers * Fit stock air boxes and COBB SF Intakes (sold separately) * Some applications require a COBB SF Intake
Not Yet Reviewed
$95.00
$85.50
On Sale
Steeda's high-quality billet intake resonator delete plugs are manufactured from quality materials to ensure performance and durability. Not only are they a great way to dress up your engine bay with ether the Steeda or Fusion logo, but their more aggressive intake tone should also be noticed at wide open throttle.
Not Yet Reviewed
$39.95
$35.96
On Sale
APR offers air intake components for an easy and affordable way to replace your worn-out or missing parts. Each piece is designed with the original factory shape to ensure an authentic look to meet your needs. Order the APR air intake components best suited to provide the optimal fit, form, and function for your ride!
Not Yet Reviewed
$9.95
—
$24.95
$5.47
—
$13.72
On Sale
APR turbocharger inlet systems are designed to outflow the factory components. These inlet systems use a 4 in. carbon fiber inlet tube that connects directly to the factory air box. These kits also include a cast aluminum inlet, which is designed to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Making the cross-sectional area large is the key to the performance gains of these kits. Upgrade your ride with an APR turbocharger inlet system today!
Not Yet Reviewed
$324.95
$211.95
On Sale
APR throttle body inlet system is a comprehensive upgrade to the factory charge pipe system from the intercooler outlet to the throttle body. APR replaces all the components and provide a new, larger, free flowing system that flows roughly 34 percent more than stock. This was achieved by increasing the cross-sectional area of the system and by reducing the tight radius bend directly in front of the throttle body. This system does away with two potential boost leak points thanks to their single cast design. They have upgraded the intercooler outlet hose to a multiply wire-reinforced silicone design with T-bolt clamps that resist boost leak over the stock counterpart. APR's new billet throttle body to manifold adapter provides a convenient boost and vacuum reference point which can be used to for a gauge or anything else that suits your build. Lastly the system comes complete with new throttle body and intake manifold gaskets, which are common leak points many never know to address.
Not Yet Reviewed
$168.55
—
$222.95
$74.95
—
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
