Availability
Showing In Stock Items. Show All 23 Items.
On Sale
Holley Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (red, blue, or black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs. less than a comparable zinc carburetor. Holley Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as 4 corner idle for precise idle control, mechanical secondaries for great performance, clear fuel level sight plugs for easy, no mess fuel level adjustments, Ford automatic transmission kickdown for use on popular Ford transmissions, four vacuum ports for all necessary vacuum accessories, and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with red, blue, or black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track.
( 81 )
$899.95
—
$1,049.95
$808.95
—
$943.95
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$849.95
—
$999.95
$763.95
—
$898.95
On Sale
Performance Design XS intake manifolds break the mold of existing intake manifold architecture to maximize available space under the hood. When designing the optimum intake runner length and shape, the fuel rail gets in the way—so they moved it—inside the intake manifold! Those billet fuel rails feature an external quick-disconnect near the stock location. Testing proved these models, featuring injection-molded, glass-reinforced nylon construction, made horsepower and torque gains on a stock engine—with increasing gains as the engine got more aggressive with camshaft and exhaust upgrades! Other product features and specifications include: * Modular runners with three staggered lengths for best performance * Forward-facing throttle body flanges (90-101mm, 103mm, and 112mm) * Full assembly can be reversed on the engine * Fits under the cowl hood of a C6 Chevy Corvette * Factory MAP sensor location * PCV and canister purge solenoid OEM connections * Accepts standard EV6 LS3/LS7-style injectors * Injector extension wires pass through sealed grommets * Maximum recommended boost is 20 psi * Carbon fiber center bolt cover * Includes stainless steel hardware for installation * Includes molded port, plenum, and throttle seals
( 1 )
$999.99
$899.99
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$849.95
—
$1,049.95
$763.95
—
$943.95
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$927.95
$834.95
On Sale
Holley Sniper EFI fuel tank systems will complete your EFI swap. They fit and look like an OE tank, but each Sniper tank is a direct-fit for your application, which means no modifications for you to perform. The tanks are powdercoated galvanized steel for corrosion resistance and lasting good looks. Your Holley Sniper EFI fuel tank kit will include the tank, fuel pump, fuel level sender, and internal baffling. Some kits may also include filler neck and tank straps. Sniper EFI tanks feature: * Fuel pump (255 lph) with hanger assembly gives you the fuel you need with in-tank quietness * Sender has 1/4 in. NPT supply and return line ports for easy connection and a barbed vent fitting * Fuel level sender has the correct ohm range for your factory gauges * Fuel pump and sender are recessed in the tank to provide an easy installation * EFI-style tank baffling includes a large 4.3L internal fuel tray to prevent fuel pump starvation
( 23 )
$849.95
—
$999.95
$763.95
—
$898.95
On Sale
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$889.00
—
$1,099.00
$755.65
—
$934.15
On Sale
Holley EFI LT1 Gen V Hi-Ram intake manifolds provide the ultimate performance with GM direct-injected Gen V 6.2L LT1 engines. The modular design allows easy disassembly for custom porting, multiple tops, or custom induction systems. Each runner has a large radius where it meets the plenum, and optimized taper and cross-sectional area to perform in a wide variety of engine configurations. When you look for the pinnacle of performance, price, and quality, look to Holley Hi-Ram intake manifolds for your LT1 application. Features include: * Available with injector bosses on the intake runners that provide increased performance potential by using additional injectors and the factory direct injection * Removable top * Large plenum volume * Intakes with injector ports include fuel rails with dual mounting * Fuel rails are anodized, laser-etched, and machined for -8 AN O-ring fittings at each end * Rear of plenum machined for MAP sensor and three vacuum ports * Head flange has clearance for fuel supply to a high-pressure pump * Increased runner wall thickness for custom porting at the plenum to runner entry on each runner * O-ring seals at cylinder heads and plenum top * Easy assembly with top-mounted screws on plenum top (except front two screws) * Several top options: 1 x 95mm, 1 x 105mm, 2 x 4150, 2 x 4500, or blank flange for custom throttle bodies * 3,500 to 8,000-plus rpm power band
( 2 )
$949.95
—
$1,049.95
$853.95
—
$943.95
On Sale
If you are adding nitrous or boost to your 2010-2015 Camaro race car, Holley has the fuel pump upgrades for you, like these dual in-tank pumps. The fuel pump module design starts with a billet pump flange assembly and connects it to dual 340 or 450 LPH fuel pumps for maximum fuel delivery. The module also includes two HydraMats to eliminate fuel starvation under hard acceleration or cornering. The integrated jet pump assembly allows retention of factory drivers side fuel pickup. A new level sensor is included and pre-installed. Installation is as simple as removing factory module and replacing with Holley module. Select the dual in-tank pump model that's designed for your application. Features and benefits: * Machined, billet, anodized, laser-etch components for durability and good looks * -8AN ORB inlets and outlets (return fitting included) * Two HydraMats, one for each pump * Integrated jet pump assembly allows retention of factory drivers side fuel pickup * Have been tested to deliver stable fuel pressure down to low fuel indicator warning light * Brand new level sensor included and pre-installed to make installation as simple as removing factory module and replacing with Holley module * Outlet fitting included to connect to factory feed line * Secondary ORB port machined into flange for easy AN plumbing of feed line * Module is return-style only so a regulator must be installed
Not Yet Reviewed
$949.95
$853.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
—
$949.95
$799.95
—
$853.95
On Sale
Fitech introduces the all-new Go EFI Classic fuel injection systems in a stunning carburetor gold finish. Fitech EFI re-captures the old-school look while maintaining its innovative, award-winning patented design—eliminating cold start issues, hesitation, vapor lock and flooding. This innovative system hides the injectors and has an externally mounted ECU, so it can be mounted wherever you want to ensure a true carburetor look is maintained. The Go EFI Classic is a self-tuning fuel injection system rated for up to 650 hp. The more you drive the more it adapts to your personal style—perfect for your everyday driver, weekend Street Machine, or Bracket Racer. Additional features: * Dual bolt pattern; designed to fit both the spread bore and 4150 square bore flange * Integrated ignition timing control and coil driver * High-resolution, full-color touch screen for setup, tuning, and gauge display * Bosch LSU 4.2 wideband oxygen sensor for real-time fuel mapping * Clamp-on oxygen sensor kit for leak-free installation * High-flow aluminum throttle body with 45mm diameter venturi to increase airflow * Designed for use with original distributor, factory throttle linkage, and most four barrel manifolds
( 4 )
$1,144.00
$972.40
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$899.95
—
$1,099.95
$849.95
—
$949.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$899.95
—
$999.95
$849.95
On Sale
APR turbocharger inlet systems are designed to outflow the factory components. These inlet systems use a 4 in. carbon fiber inlet tube that connects directly to the factory air box. These kits also include a cast aluminum inlet, which is designed to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Making the cross-sectional area large is the key to the performance gains of these kits. Upgrade your ride with an APR turbocharger inlet system today!
Not Yet Reviewed
$1,099.95
$988.95
On Sale
FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 7 )
$1,111.99
$1,000.79
On Sale
K&N 77 Series high-flow performance cold air intake kits are aftermarket air induction kits designed for trucks and sport utility vehicles. They include a free-flowing, mandrel-bent intake tube (various materials and color options) with a Million Mile Warranty. K&N 77 Series cold air intake kits replace your restrictive factory air filter and intake housing, maximizing your power and acceleration. They include a washable, reusable air filter and offer guaranteed performance for their vehicle applications.
( 479 )
$839.99
$789.99
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$999.95
$898.95
On Sale
Dinan carbon fiber air intake systems force-feed the engine with greater volumes of cool, oxygen-rich air for substantial power gains. These kits are so effective that the carbon fiber inlet air temperature is a full 40 degrees F cooler than the incoming air from the stock inlet. Due to the increased airflow, the power-curve is extended into the higher rpm for a noticeable change. Dinan carbon fiber air intake systems are direct replacements for the factory air box lid. They employ a hand-crafted carbon fiber unit--including a secondary carbon fiber intake tube that captures cool air from the lower grill. Shielding is provided for the conical filter to insulate it from power-robbing engine compartment heat. Order the model designed for your vehicle and engine application.
( 4 )
$999.95
—
$1,099.95
$898.95
—
$988.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
