Availability
Showing In Stock Items. Show All 19 Items.
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$565.95
—
$674.95
$508.95
—
$606.95
On Sale
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 44 )
$599.95
—
$799.95
$538.95
—
$718.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$799.95
—
$899.95
$584.95
—
$718.95
On Sale
Install smarter boost management with Turbosmart e-Boost 2! These electronic boost controllers give you ultimate control over the boost curve with smart features designed to get results. Engineered to win, Turbosmart e-Boost 2 boost controllers lead the class with 60 psi max boost operating pressure. They allow you to control, monitor, map, and compensate boost, plus control water spray, methanol or nitrous injection, manage shift/warning lights, and read/monitor rpm! Their state-of-the-art software is easy and logical to use, so you can confidently control all aspects of the boost curve--set point, gate pressure, and sensitivity. Whether you have a top-level racer or street-going vehicle, if it's turbocharged, make it Turbosmart-charged with Turbosmart e-Boost 2 boost controllers!
( 2 )
$660.95
$518.99
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$562.95
—
$713.95
$506.66
—
$571.16
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$621.95
—
$649.95
$558.95
—
$583.95
On Sale
Nitrous Outlet Hot Bath nitrous bottle warmers are used by hardcore racing enthusiasts to heat nitrous bottles by submerging them in water—and using the electronic control module to dial in an exact temperature. This is the most precise method of heating a bottle to a specific pressure rating. The bath units will heat almost any size bottle and are meant for racers who need to heat several bottles. These heaters do not operate inside the vehicle; they must be plugged into a standard 110 V outlet to operate. Hot Baths are made from heavy gauge TIG-welded aluminum and are powdercoated for long-lasting oxidization protection. The edges have a thick rubber coating to prevent scratches to bottles; and a thick aluminum handle divides the unit into two sections. Prepare your nitrous for optimum performance!
( 1 )
$848.99
$721.64
On Sale
These Edelbrock Super Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 10 )
$713.95
$571.16
On Sale
BD Diesel E-PAS emergency engine shutdown systems are engineered to help prevent runaway scenarios by cutting the air supply to your big rigs engine--ensuring fuel injection to cease. The E-PAS (electronic controller) simply re-purposes the factory butterfly valve in your EGR system. It installs easily with factory style plug-in connectors, and it will not interfere with normal operation, throw codes or check engine lights. Most importantly, device can be easily uninstalled for those that lease their truck. Features of E-PAS emergency engine shutdown systems: * Emergency engine shutdown to keep you and your truck safe * Over speed shut down control utilizing built-in intake air control valve * Safely shuts your engine down if over speeding * Factory plug-in connections and wiring harness * Save hours of installation labor over mechanical systems * Does not set ECM trouble codes * Automatically resets after shut down * Only the switch needs a tool to install * Easily removed for truck lease returns Important note: this product requires your factory EGR and emissions equipment to function properly. It is not intended to be used on trucks which have been modified for off-road tuning.
Not Yet Reviewed
$735.95
$662.36
On Sale
Go Fast Bits Deceptor Pro II With Mach 2 Motorized Blow-Off Valve Combos deliver all the performance—with or without the noise! Give your Kia Stinger the sound you want and the performance to go with it. This is a combination kit for the Stinger that mixes the valve types. Since both valves are fed from a common chamber, and there is no MAF sensor, it's no problem to mix and match valve types and venting bias. The combo includes one Deceptor Pro II AND one Mach 2, which still allows you to adjust the venting sound, but at a more affordable price than the twin Deceptor Pro kit. You can adjust the volume of your sound system from the driver's seat, as well as your Stinger's exhaust sound—so why not the BOV sound too? The Deceptor Pro II features the same patented Venting Bias Adjustment System as the Respons TMS, but adds electronic in-cabin adjustment so you can change how loud the BOV venting sound is from the driver's seat! To top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio.
Not Yet Reviewed
$625.50
$562.95
On Sale
Want to add some precious ponies to your 5.0 in less than an hour? If so, then aFe Power's new billet throttle bodies (BTB) fit the bill. These easy-to-install products will increase your Ford's power by a dyno-proven 17 hp and 15 lbs.-ft. of torque at 6,000 rpm! How did they accomplish this? The devil is in the details: increase the bore diameter without going so big that installation requires a lot of fabrication; redesign from the ground up to improve the airflow path; use materials that protect against galling (chafing); use OEM electronics and gearing mechanisms to ensure proper function and connectivity, preventing rough-idling and tripping of the check engine light. It all adds up to make aFe billet throttle bodies one of the simpler bolt-on upgrades you can do to your car or truck!
( 1 )
$689.85
$620.87
On Sale
Restore proper engine function with Standard Motor TechSmart throttle bodies. These electronic assemblies will maintain the correct volume of airflow into your engine. Each of these units features a butterfly valve, which is electronically controlled by the ECU to precisely open and close for the correct regulation of the fuel/air mixture. Many feature cast aluminum housings with an exact fit for an easy installation. Standard Motor TechSmart throttle bodies offer durable, reliable performance that have made Standard Motor Products an industry leader for more than 95 years.
( 10 )
$605.99
$545.39
On Sale
Okay, yes, there are times you wish you could have that signature turbo blow-off sound, but not all the time. Go Fast Bits Deceptor Pro II TMS direct-fit motorized blow-off valves deliver just what you need—the ability to control how loud your BOV sound is, from the driver's seat. Featuring GFB's patented Venting Bias Adjustment System, coupled with remote electronic control, Deceptor Pro II units allow you to infinitely vary how much air is recirculated, and how much is vented to atmosphere. So, if your car typically suffers issues, such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. GFB Deceptor Pro II features and benefits: * Adjust your BOV venting bias electronically on-the-fly * Revised porting to optimize flow and venting bias * Compact design fits in most factory valve locations * Bore finishing process ensures a lifetime of reliable operation * Direct bolt-on for most vehicles available * Remote proportional venting bias/volume control- from silent to loud or anywhere in between * Sleek, compact in-car BOV volume controller with backlit dial * End-point adjustment to control maximum vent to atmosphere bias setting * Volume adjustment mechanism driven by a high-torque geared electric motor * Durable, low-friction gear train supported by precision sealed ball-bearing * Supplied with all parts and wiring required to have it up and running quickly and easily
Not Yet Reviewed
$805.50
$724.95
On Sale
FUELAB dual pump fuel surge tank systems are ideal for Autocross or off-road use—where fast changes in g-forces can allow air to be picked up by the main fuel pump. FUELAB fuel surge tank systems maintain a small amount of fuel to operate their own internal fuel pump that can supply high fuel flow rates, while only needing a relatively low fuel flow rate from the main fuel pump. A return line is required to return excess fuel back to the vehicle's fuel tank. Every FUELAB surge tank features a high-quality billet aluminum construction and long-lasting finish. There are two different sizes available to fit your specific needs.
Not Yet Reviewed
$897.00
—
$905.00
$807.30
—
$814.50
On Sale
FUELAB single pump fuel surge tank systems are ideal for Autocross or off-road use—where fast changes in g-forces can allow air to be picked up by the main fuel pump. FUELAB fuel surge tank systems maintain a small amount of fuel to operate their own internal fuel pump that can supply high fuel flow rates, while only needing a relatively low fuel flow rate from the main fuel pump. A return line is required to return excess fuel back to the vehicle's fuel tank. Every FUELAB surge tank features a high-quality billet aluminum construction and long-lasting finish. There are two different sizes available to fit your specific needs.
Not Yet Reviewed
$751.00
—
$758.00
$675.90
—
$682.20
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
