Availability
Showing In Stock Items. Show All 68 Items.
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$349.95
—
$518.95
$314.95
—
$466.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
On Sale
Holley Sniper in-tank fuel pump modules are direct-fit units to drop directly into the specific vehicle application. Two modules--the Sniper 340 lph and Holley 525 lph--feature a 6061 T-6 flange that has a bright dip black anodized finish for corrosion protection and long-lasting good looks. The flanges have a 6AN O-ring outlet and return port making the plumbing connections easy. The assembled modules include a new filter sock and the lock ring to complete the installation into your stock fuel tank. Choose the module designed for your vehicle. Notes: * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for the specific application * 340 lph module supports up to 700 EFI or 900 hp carbureted * 525 lph module supports up to 1,200 EFI or 1,450 hp carbureted * Both EFI and carbureted systems will need a bypass design regulator
Not Yet Reviewed
$519.95
$466.95
On Sale
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$399.95
—
$449.95
$359.95
—
$403.95
On Sale
Holley OEM-style EFI fuel tank modules are designed as a direct replacement for your factory pick-up and sending unit. There's no need for modifications—and you won't have to replace your fuel tank! You can even retain the factory fuel hard line; just connect the outlet of the pump module to the hard line on your vehicle with some EFI-rated fuel hose and hose clamps. Order the model designed for your vehicle application. Additional features of Holley OEM-style EFI fuel tank modules: * Module includes a pre-calibrated fuel-level sending unit that is designed to work with the factory fuel gauge already in vehicle * Holley includes a HydraMat with its unique internal reservoir to keep fuel available at the pick-up, while also providing protection from contaminates * Fuel pressure is regulated internally and preset at 58 psi, eliminating the added expense of purchasing an external fuel pressure regulator * No return line needed (all return fuel is handled inside the tank)
Not Yet Reviewed
$530.95
$292.95
On Sale
Crown Automotive fuel pump modules are great OE replacements for your rig. These quality units will restore the filtering, pumping, and data-sending characteristics to keep your fuel system working efficiently. When you want a good fit and proper function, choose Crown Automotive modules.
( 15 )
$306.99
—
$327.99
$276.29
—
$295.19
On Sale
Brothers Trucks fuel tanks are the result of a creative solution for an easy under bed gas tank conversion when you want to move the classic or vintage stock setup from in or near the cab. They combine a Brothers tank with appropriate hardware for easy installation. While modifications are required for the new fill neck location, in most cases, the rear frame crossmember is unaffected by this installation. Increase the safety factor of your classic truck or SUV with an assist from Brothers Trucks fuel tanks. More product features and specifications include: * Classic applications model includes straps, lock ring, and hardware * Vintage applications model includes special mounting brackets and will require an application-specific sender (original spare tire crossmember removal may be required)
( 1 )
$349.95
—
$399.95
$314.95
—
$359.95
On Sale
Control your fuel pressure with one of these Aeromotive Extreme Flow EFI fuel pressure regulators. They're manufactured from durable aluminum, then anodized for maximum protection. The regulators include a standard spring (installed) that supports 30-75 psi base fuel pressure and a high pressure spring (included) to support 75-120 psi base fuel pressure. Aeromotive Extreme Flow EFI fuel pressure units also support vacuum and boost reference on a 1:1 ratio.
( 13 )
$312.95
$281.66
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
On Sale
Holley 2300 model carburetors are perfect for racing classes where 2-barrel carburetors are required, or for hot rodders looking for something different. These units have many performance features—including a manual choke, center hung float bowl, universal throttle lever, all-metal parts, replaceable jets, a power valve, and high-flow venturi. Holley 2300 carburetors are available in universal and vehicle-specific applications.
( 99 )
$534.95
$480.95
On Sale
Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers give you access to a wide range of tuning options. These hand-held controls can be used as a fully customizable data monitor—and with the unit's 3 1/2 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own with Holley Sniper 2 EFI 3.5 in. LCD touch screen controllers. Features and benefits include: * Full-color, backlit 3 1/2 in. touch-screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, and ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Set up ECU data-logging, download data-logs, or upload and download global folders with the SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes the touch screen controller, mounting sleeve, power and extension harness, and SD card * Screen dimensions – 3.350 in. wide x 2.850 in. tall x 0.700 in. thick * Sleeve dimensions – 3.625 in. wide x 2.925 in. tall x 1.000 in. thick
( 1 )
$279.95
$251.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 56 )
$339.99
—
$379.99
$319.99
—
$339.99
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$499.95
—
$528.95
$448.95
—
$475.95
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$399.95
—
$777.95
$359.95
—
$505.95
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$585.00
$373.60
—
$468.00
On Sale
With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.
( 39 )
$302.95
—
$320.95
$272.65
—
$288.85
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: * The steel fuel tanks have a galvanized finish for corrosion protection and good looks * Stock replacement fuel tanks are made to OEM specifications for a great fit * Perfect companions with Holley muscle car EFI modules or Retrofit EFI pump modules * Tank sending unit lock ring is included
( 62 )
$367.95
$331.15
On Sale
Small but potent, MSD Atomic EFI TBI power modules handle the high current loads! The modules supply power to the fuel pump (no need for an external relay), and they have two activation wires so you can set temperatures for dual electric cooling fans. The Atomic TBI power modules easily plug into the throttle body-mounted engine control unit with a single, clean connection--thanks to MSD's CAN-Bus technology. Then, simply plug in the handheld monitor and you're ready to go! The right modules supply the right power … Atomic power for your MSD EFI TBI systems.
( 1 )
$549.95
$493.95
On Sale
Airaid revs up your engine with its SynthaMax MXP Series cold air intake kits! These induction units offer a high performance, maximum-flow design teamed with high-tech filtration technology at its best. Their one-piece, roto-molded air box cancels out restrictive factory designs, while their massive cross-linked, high-density polyethylene air intake tube maintains proper air/fuel ratios; no recalibration is needed after the install. Add to this the super-synthetic, oil-free maintenance of SynthaMax washable, reusable filters—and you have clean, cold air for your gas or diesel beast to breathe for improved horsepower and torque.
( 12 )
$367.99
—
$399.99
$317.99
—
$369.99
On Sale
Designed to be used with Aeromotive HP marine fuel pumps, these HP marine EFI fuel pressure regulators provide full pressure adjustments from 40-70 psi, plus a 1:1 boost/vacuum reference. The units are CNC-machined from 6061-T651 billet aluminum alloy with stainless steel hardware and handsomely finished with a type III hard-coat anodized exterior.
( 1 )
$334.70
$301.23
On Sale
Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)
( 8 )
$304.95
—
$649.95
$252.99
—
$517.99
On Sale
Steeda cold air intake kits will deliver more clean airflow to your engine. These replacement/upgrade units are manufactured from quality materials to ensure performance and durability. An easy-bolt on part for the garage mechanic, Steeda intakes are supplied with an air box, filter, and tube (where applicable). They mount in the factory location with the supplied rubber trim to seal them against the hood and fender and keep the hot air out. All necessary hardware and easy-to-follow instructions are included. Order the model designed for your specific vehicle.
( 13 )
$304.95
—
$524.95
$263.99
—
$474.99
On Sale
Upgrade your existing Aeromotive brushless fuel pump with the new True Variable Speed Controller (TVS), which offers the advantage of pump speed control via a 0-5 V analog DC input signal. The TVS controller capitalizes on existing brushless technology by reducing fuel flow during low-demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. These units are quality replacements or improvements to your fuel pump system.
Not Yet Reviewed
$402.10
$361.89
On Sale
Mishimoto R-Line intercoolers provide the perfect cooling capacity needed for supercharged and turbocharged vehicles. These front-mount units feature durable bar-and-plate cores that provide superior heat transfer and effectively reduce air intake temperatures. Mishimoto R-Line intercoolers are constructed of powdercoated 6061 aluminum and provide a fin pitch of 15 fins/in., along with massive 4 in. cores and 3 in. inlets/outlets to flow 1,250 cfm. Additional features: * Robust, one-piece cast aluminum end tanks withstand high-boost pressures * Universal mounting points * TIG-welded to perfection * Mishimoto Lifetime Warranty * Available in silver, black, or gold * Note: For your taste, only one side of the intercooler has the Mishimoto logo
( 6 )
$376.95
—
$398.95
$317.95
—
$359.06
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
