Availability
Showing In Stock Items. Show All 11 Items.
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$296.95
—
$595.95
$267.26
—
$536.36
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$339.95
—
$482.95
$305.96
—
$386.36
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 52 )
$366.95
—
$449.95
$330.25
—
$403.95
On Sale
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$399.95
—
$471.95
$359.95
—
$423.95
On Sale
GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001
Not Yet Reviewed
$364.50
—
$594.00
$328.05
—
$534.60
On Sale
Go Fast Bits D-Force Diesel Electronic Boost Controllers are the perfect partner for all turbo diesel engines that use a pneumatic wastegate. With six boost presets and a timed scramble feature that can be selected on-the-fly, the D-Force can adjust your boost for all driving conditions—such as overtaking, towing, economy, racing, or even protecting the engine. As any modified turbo diesel owner knows, it's important to monitor EGT (Exhaust Gas Temperature) to avoid costly engine damage. Not only can the D-Force control your boost, but it can also display EGT! No other EBC offers the features, control, and ease of use like the D-Force. Order the D-Force with or without an EGT sensor. Additional details: D-FORCE GIVES YOU ULTIMATE CONTROL OF YOUR BOOST PRESSURE! Want to adjust boost for towing? Change it if EGT gets too high? Have multiple settings for different driving conditions? Bring boost on earlier or hold it longer? The D-Force can do all of this and more! Using a unique boost control strategy, D-Force lets you adjust the boost rise rate, peak boost, and closed-loop correction. There are six boost presets (plus an extra one dedicated to the scramble feature) that you can set up with different boost parameters for different driving conditions, and then activate them on-the-fly or at the press of a button. The unique scramble feature can be set up for a variety of purposes. It can raise or lower boost when activated with the screen button, or via the auxiliary input using a switch, button, or ECU output. For example, you could use it to lower boost pressure for safety by connecting it to an existing warning light, or instantly access high boost by pressing a button or flipping a switch. * The D-Force can also display Exhaust Gas Temperature and has a user-adjustable warning. This feature requires the EGT plug-in module, which includes a stainless steel EGT probe and weld-on exhaust bung, along with the module to connect it to the D-Force wiring loom. The D-Force kit is available with or without the EGT plug-in module, and the module is also available separately. * The controller interface is easy to use with touch-buttons and one-touch menu navigation. The boost pressure units can be displayed in psi, bar, kPa—and the peak recall feature lets you see your peak boost after each boost event. * 50 psi capability! * Closed-loop boost control strategy—for the fastest possible boost rise rate and minimum drop off at high RPM, the adjustable closed-loop logic helps prevent boost variations that can occur in different gears, RPM ranges, and atmospheric conditions. * Remote input trigger: Connect the remote input wire to a switch, button, warning light or ECU output to change boost presets or activate scramble boost. * Over-boost warning/cut: User adjustable warning to indicate if the boost pressure is too high and to cut the solenoid to lower boost and protect the engine. * Touch screen interface with simple menu navigation: Capacitive touch screen and single-touch menu navigation makes setup exceptionally easy. Scrolling text also means you always know where you are in the menu. * Choose your screen color: You can set the button illumination to any one of six different colors to match your car's dash.
Not Yet Reviewed
$396.00
—
$513.00
$356.40
—
$461.70
On Sale
Summit Bucks
Helping your engine breathe better is a great way to extract maximum performance for a small investment, and intake/exhaust modifications can provide even greater benefits as you begin to upgrade other systems of your vehicle. Your stock turbo inlet pipe is sturdy and supplies ample airflow for a stock or lightly modified vehicle, however the internal pathway leaves room for improvement for those seeking maximum airflow. And this is where Mishimoto turbo inlet pipe upgrade kits come in. Using the latest in 3D printing, CAD modeling, and flow bench technology, Mishimoto inlet pipes are 16.7 percent less restrictive than stock units, creating an optimal pathway for airflow from the air intake box to the turbocharger. Choose one for your vehicle. Additional features: * Precision CNC-machined cast-aluminum turbo inlet connection * Larger diameter inlet pipe reduces pre-turbo air restriction to improve spool * Robust 4-ply silicone inlet coupler adapts MAF housing to the larger diameter inlet pipe * CNC-machined EVAP hose flange * Bead-rolled pipe ensures a leak-free seal * Durable micro-wrinkle powdercoated finish available in black or red * Stainless steel worm gear clamps for installation * Mishimoto Lifetime Warranty
Not Yet Reviewed
$417.95
$376.16
On Sale
aFe BladeRunner turbo inlet manifolds increase performance to your engine while increasing air flow over the factory turbo inlet. BladeRunner turbo inlet manifolds also improve turbo spool up times and lowers exhaust gas temperature (EGT). They're constructed of durable A356-T6 aluminum and use the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. BladeRunner manifolds come complete with all necessary mounting hardware.
( 4 )
$441.00
$396.90
On Sale
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
$350.96
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$497.95
$398.36
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$394.95
$355.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
