Availability
Showing In Stock Items. Show All 15 Items.
On Sale
MSD Power Grid boost controllers let the driver regulate the amount of boost pushing air into the engine. These controllers allow you to devise a timing map based on boost pressure, and map entire runs with advanced View software. Values are based on pressure sensors, including a 4-BAR internal, which is good through 43.5 psi. The units include a safety overboost shut-down feature and boost pressure activation output. (To use any modules with the Power Grid system, users must plug the modules into a 4-connector CAN-Bus hub to be attached to the Power Grid system controller). For optimum control of boost, use MSD Power Grid boost controllers.
( 1 )
$1,549.95
$1,393.95
On Sale
Holley Sniper EFI 2GC small bore fuel injection systems let you convert your classic 2GC small bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC small bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1955-69 Chevrolet, Buick, Oldsmobile, and Pontiac vehicles that came with Rochester 2GC small bore carburetors
( 2 )
$1,399.95
$1,258.95
On Sale
FiTech Go EFI 2-Barrel 400 hp Force Fuel injection master kits deliver electronic fuel injection with a fuel delivery solution. Each master kit pairs the 400 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. The Go EFI 400 hp throttle body is perfect to update your 2-barrel fed cruiser with the drivability benefits of electronic fuel injection. It has an incorporated ECU producing a simple installation with only a few wires to connect (fuel pump, ignition, power, and tach). FiTech Go EFI 2-barrel is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.
Not Yet Reviewed
$1,324.99
$1,126.24
On Sale
FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 7 )
$1,111.99
—
$1,171.99
$1,000.79
—
$1,054.79
On Sale
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 44 )
$1,399.95
$1,258.95
On Sale
Holley Sniper EFI 2GC large bore fuel injection systems let you convert your classic 2GC large bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC large bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion for 1974-78 Chevrolet, GMC, Oldsmobile, and Pontiac vehicles that came with a Rochester 2GC large bore carburetor.
Not Yet Reviewed
$1,299.95
—
$1,599.95
$1,168.95
—
$1,438.95
On Sale
FUELAB 2800 Series SAE flange twin screw in-tank brushless fuel pumps are rated up to 2,800 hp—best in power and efficiency. The pumps are designed to be used with 595 Series fuel pressure regulators with .328 in. orifice or larger. These aftermarket upgrades offer an array of features: --- Pump features: * Compatible with gasoline, diesel, methanol, and ethanol * Twin screw rotor pumping mechanism * 125 psi max operating pressure * 1,100 lph at 45 psi; speed controllable * 2,800 hp power support * Higher efficiency means less current draw and less noise * Superior priming capabilities * Greater resistance to cavitation (vapor lock) --- Electronic features: * 12 to 16 V vehicle electrical system compatibility * Variable duty motor speed --- Motor features: * Lightweight super-efficient DC brushless motor to minimize current draw * Powerful high flux density Neodymium rare earth magnets * No motor brushes to wear out or corrode (low-Sulfur diesel, no problem) * Wet motor design, no dynamic shaft seals that can wear out --- Construction features: * Compact, lightweight design, less than 2.5 lbs. Overall length 8 in., pump diameter 2 in. * Billet aluminum construction with anodize per MIL-A-8625 Type II * Flange mounted SAE 10-bolt pattern for easy use with fuel cells of fabricated reservoirs * Long life, multi-fuel compatible fluorosilicone static seals * Accepts standard or port style -8 AN fittings --- Pulse Width Modulation compatibility (PWM): * Compatible with most aftermarket ECU's with PWM output frequency * Compatible from 100Hz to 5000Hz * AEM * ECU Masters * Fueltech * Haltech * Holley * Link Engine Management * Megasquirt
Not Yet Reviewed
$1,549.00
$1,394.10
On Sale
FiTech Easy Street 600 hp EFI system Force Fuel/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.
Not Yet Reviewed
$1,484.99
—
$1,546.99
$1,336.49
—
$1,392.29
On Sale
Edelbrock Victor Jr. carbureted intake manifolds are capable of supporting up to 600 hp. They accept a standard 4-barrel square bore carburetor. The manifolds are made of high-quality aluminum and feature a natural finish. The required electronic timing control module is sold separately .
( 9 )
$1,297.95
$1,038.36
On Sale
FiTech Go Port standalone fuel injection systems put high performance within the reach of everyone! The innovators at FiTech have taken advantage of the easy throttle body installation and precision fuel distribution of port-style EFI to create a system that is a "Go" for all enthusiasts. FiTech Go Port EFI standalone systems with Go-Spark CD ignition combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus the delivery of high-powered sparks that improve combustion and power output. Sensors, harness, and gaskets are included, along with a hand-held touch screen controller and. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire nonmagnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$1,593.99
$1,434.59
On Sale
FiTech Easy Street 600 hp EFI system/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel universal in-tank pump modules—340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,321.99
—
$1,382.99
$1,189.79
—
$1,244.69
On Sale
FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. Along with that will be FiTech's Go Fuel Force Fuel system. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge.
Not Yet Reviewed
$1,770.99
$1,593.89
On Sale
FiTech Go Port EFI standalone system Go Fuel in-tank pump fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier. The Go Port EFI system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. Along with that will be FiTech's universal Go Fuel in-tank 340 lph pump module. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. FitTech Go Fuel in-tank pump module can be used on tanks with a depth of 6 in. to 15 in. The billet top assembly is designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly, and the vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included.
Not Yet Reviewed
$1,546.99
$1,392.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
