Availability
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$244.98
$241.98
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
On Sale
These Summit Racing™ harmonic balancer and flexplate combos are a great way to finish off your engine rebuilding project. They include a new performance balancer, flexplate, balancer bolt and flexplate bolts all in one affordable package.
( 2 )
$180.91
$178.62
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$330.89
—
$568.89
$303.80
—
$521.20
On Sale
Summit Racing™ induction kit Pro Packs have an Edelbrock Performer RPM intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street, with a maximum performance of 1,500-6,500 rpm. To top them off, we've added an Edelbrock Performer 600 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
( 1 )
$945.86
$861.78
On Sale
These Summit Racing™ harmonic balancer and flexplate Pro Packs are a great way to finish off your engine rebuilding project. They feature our Street & Strip flexplate and include a new performance balancer and bolts all in one affordable package.
( 10 )
$180.91
$178.62
On Sale
These Summit Racing™ top end Pro Packs are guaranteed to give your engine a shot in the arm. We have taken out the guesswork and matched up all of these components for maximum bolt-on power, right out of the box. Get one of these Summit Racing™ top end Pro Packs and put your motor on track for some serious horsepower. Features include: * Pair of cylinder heads that will outflow your stock heads * Head bolts * Intake manifold * Intake gaskets * Intake bolts
( 1 )
$3,338.65
—
$6,972.87
$3,122.75
—
$6,921.38
On Sale
Summit Racing™ induction kit Pro Packs have a GM Performance Parts intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street. To top them off, we've added a Holley Street Avenger 770 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
Not Yet Reviewed
$1,328.36
$1,257.36
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,125.51
—
$1,157.51
$1,021.51
—
$1,050.51
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$584.96
—
$773.95
$534.96
—
$723.95
On Sale
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$23.99
$17.99
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$580.10
$541.97
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$777.89
—
$880.89
$774.89
—
$877.89
On Sale
Summit Racing™ double-adjustable ladder bar kits are built for strength, consistency, and ease of adjustment. Fabricated from 1 in. diameter DOM tubing, these 32 in. bars come complete with all hardware--including 3/4 in. heims--and use a large 3/4 in. front bolt. The double-adjustable link allows you to make quick pinion angle and preload adjustments without removing the bars from the car. Easy to install and simple to adjust, nothing hits the tires like a Summit Racing™ double-adjustable ladder bar suspension. Installation by a certified welder is recommended. Additional product details: * Durable black powdercoat finish * Rod end safety loops included * 3/4 in. rod ends, adjusters, jam nuts, and Grade 8 hardware * 3/16 in. weld-on housing brackets * Set up for 32 in. from center of housing to center of rod end
( 3 )
$329.99
$296.99
On Sale
Summit Racing™ Dynamic Fuel Management (DFM) Delete Pro Packs are a necessary first step when performing other major engine modifications, such as installing an aftermarket camshaft. These Pro Packs offer benefits like eliminating lifter failure risks, providing consistent V8 power and throttle response, improving sound with performance exhausts, and simplifying upgrades by bundling necessary performance parts for the conversion. The Pro Packs are curated by Summit Racing™ experts, ensuring the included components, such as new lifters, lifter guides, head bolts, and valley covers, are specifically matched to work together, saving guesswork and helping to prevent installation surprises. Order the Pro Pack designed for your vehicle.
Not Yet Reviewed
$728.86
—
$764.86
$703.86
—
$751.86
On Sale
Summit Racing™ is proud to offer Ecoboost turbo manifolds for the 3.5L Ecoboost engines. The factory manifolds are known for warping, cracking, and then leaking when used under heavy loads. Our upgraded stainless manifolds are much heavier than the lightweight factory versions and they flow better which improves exhaust flow and lowers back pressure, allowing the turbos to spool quicker. Since they must be replaced you might as well gain some power and mileage. Check out these features below: * Cast in high-strength and corrosion-resistant CF8 (304) stainless steel * Extra thick flanges have higher resistance to warpage and cracking * Individual runner into collector design with over 60 percent more internal volume * Port matched outlet with integrated gasket anti-extrusion ring provides 37 percent increase in outlet flow area * Additional bolt hole provides three studs for each exhaust port * Direct bolt on with no additional modifications or parts required
Not Yet Reviewed
$899.99
$799.99
On Sale
Summit Racing™ mockup replica transmission blocks allow for quick fabrication of motor and transmission mounts. Available for various GM and Tremec models, the individual panels are easily assembled with precision-cut tabs and slots for superior rigidity and accuracy, compared to bolt-together types. The panels are machined from weldable steel and are made in the USA. The lightweight replica blocks ship disassembled for ease of shipping and storage.
Not Yet Reviewed
$224.99
$199.99
On Sale
Clearance
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 15 )
$299.99
$249.99
On Sale
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
$1,999.99
On Sale
Change out your entire exhaust system with one of these Summit Racing™ exhaust system Pro Packs. They feature a pair of full-length headers, a pair of header reducers, and a complete dual exhaust. Depending on the application, headers may be available painted or ceramic coated and the exhaust kit will include 2.25 in., 2.5 in. or 3 in. diameter exhaust pipe. Installation, mounting hardware and gaskets are included for a complete bolt-in fit. Available for a variety of vehicles, the Summit Racing™ exhaust system Pro Packs will provide the performance and sound you have been looking for.
( 15 )
$1,409.61
$1,366.31
On Sale
Summit Racing™ tie rod sleeves are designed to fit over skinny factory-style inner tie rod ends known to bend when going off-road. They're built from carbon steel and replace the jam nut and thread over the factory inner tie rods to provide additional strength to keep you on the trails. You'll need to re-adjust your wheel alignment after installation. Hit the trails and dirt roads with confidence knowing your steering linkage is reinforced with Summit Racing™ tie rod sleeves. Order the pair recommended for your vehicle. Additional notes: * Carbon steel construction; black oxide finish * Bolt-on installation * Increases steering link diameter * Works with OEM tie rods
Not Yet Reviewed
$51.99
$44.95
On Sale
Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,504.09
$17,481.07
On Sale
Our Summit Racing™ 1970-74 Challenger and Barracuda Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap headers, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Challenger or Barracuda. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness
Not Yet Reviewed
$17,755.24
$17,689.42
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
