Availability
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$299.95
$164.95
On Sale
Designed exclusively for extreme-duty racing conditions, it's hard not to like all of the features in MSD's new Professional Racing Series spark plug wire boot and terminal kits. The boots feature a proprietary blend of materials to withstand much higher temperatures over a longer period of time than standard boots.
( 43 )
$39.50
—
$46.09
$35.55
—
$41.48
On Sale
Level the playing field, cut and dried, black and white—no matter how you put it, the MSD Race Ignition Test Tool easily allows tech officials to plug-in to competitors ignition units to verify everyone is playing by the rules. The tester can be programmed by a sanctioning body or race track with their master file by which racers are mandated to comply. Circle Track Officials can choose regulated parameters such as max RPM rev limit, timing curve, and coil type to regulate when using the MSD 6014CT Circle Track LS Ignition Control. Drag Race Tech Officials can plug into the MSD Power Grid, part number 7730, and monitor the ARC Module timeout feature, the safety RPM feature, and the safety timeout feature. It will also display the part numbers and serial numbers of all modules connected to the Grid. A special version of this unit will be available for NHRA Tech Officials to verify compliance of Top Fuel and Funny Car units. Features: * Quickly plug-in to competitors' ignition to test rule compliance * Works only with Circle Track LS Ignition Control P/N 6014CT, Power Grid Controller P/N 7730 and 77303 * Special version available for NHRA Tech Officials only to test Top Fuel and Funny Car units * User-friendly plug-and-play design
Not Yet Reviewed
$222.95
$122.95
On Sale
MSD 8.5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs. This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.
( 13 )
$210.95
$116.95
On Sale
MSD 7AL-3 ignition boxes have been a favorite of sportsmen and racers that want adjustments at their fingertips. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. These ignitions combine high-output spark energy for high-compression race engines, combined with the most popular drag racing accessories, including a 3-step rev limiter, 4-stage retards, a start retard, and an rpm-activated switch. MSD is re-launching the 7AL-3s with upgraded features, a new look, and updated internal components, including surface mount circuitry. The new 7AL-3s are easy to spot with a black anodized housing and a new adjustable start retard circuit. Racers will also be happy to learn that the ignition can now be used on 4, 6, or 8-cylinder engines! Additional features include: * Fits the same mounting footprint as the original 7AL-3 * Start retard is adjustable with plug-in retard modules * Retard stages require positive 12 V to activate * Surface mount assembly reduces internal components
( 30 )
$1,099.95
$988.95
On Sale
MSD HVC-2 coils utilize an iron U-core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material. That means it has incredible dielectric capabilities at high temperatures. The housing features far-spaced brass primary terminals, and a well-protected secondary tower for increased spark isolation. HVC-2 coils are designed for use with MSD 7 Series ignitions.
( 28 )
$334.95
—
$364.95
$301.45
—
$328.45
On Sale
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
—
$131.95
$80.45
—
$118.75
On Sale
MSD 7AL-2 Plus CD ignitions have all the features of the standard 7AL-2 with the addition of a 2-step rev control and a new diagnostic LED to deliver their full power at any rpm. Their multiple spark discharge circuitry gives better throttle response, off-corner performance, smooth idle, and more consistent launches. Their built-in soft touch rev control protects your engine from damage due to over-revving and they feature accurate rev-limiting action that's smooth, without backfires or roughness, and adjustments are easily made with plug-in modules. They can be triggered from points, magnetic pickups, crank triggers, and electronic amplifiers. MSD 7AL-2 Plus CD ignitions are available for 4, 6, and 8-cylinder engines. From NHRA to Circle Track, they're proven winners.
( 19 )
$849.95
$763.95
On Sale
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
$988.95
On Sale
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 151 )
$59.25
—
$65.75
$53.35
—
$59.15
On Sale
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$549.95
$493.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$380.95
—
$825.95
$302.95
—
$742.95
On Sale
For off-road, marine, racing, or other extreme environments, MSD Blaster high-vibration ignition coils are the best choice. Their sturdy metal housing is potted with a premium-grade epoxy to completely encase the coils' primary and secondary windings. This protects the coils from high and low frequency vibrations. Alkyd material is used to form the spark tower because of its high dielectric characteristics. For your convenience, a standard canister-type coil mount can be used, and the coils can be mounted in any position.
( 147 )
$65.35
$58.85
On Sale
The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black
( 9 )
$349.95
$314.95
On Sale
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
$420.95
On Sale
MSD Blaster HVC ignition coils are designed for high-rpm, long-duration applications, such as road course and Circle Track racing using the MSD 6 Series ignition. These units feature a 100:1 turns ratio, as well as lower primary resistance to produce high-voltage output. Windings are encased in a durable epoxy and secured with extruded brackets. They also feature a spark plug style terminal and a threaded brass primary stud. These ignition coils are CARB EO-approved and are supplied with rubber shock mounts to help them resist coil vibration. Equip your performance vehicle with MSD Blaster HVC ignition coils and feel the power!
( 34 )
$206.95
$186.25
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$424.95
—
$641.95
$302.21
—
$538.95
On Sale
If your racecar, Corvette, or race Corvette requires a distributor with a mechanical tach drive, these Pro-Billet Tach Drive distributors from MSD are what you need. Their race-proven magnetic pickup delivers precise trigger signals to your MSD ignition every time one of the reluctor's precision paddles pass by. This reluctor assembly is connected to an oversized steel shaft for increased strength and endurance, and is responsible for triggering the magnetic pickup. Inside the stout billet 6061-T6 aluminum housing, a sealed ball bearing and long sintered bushing guide the 0.500 in. steel shaft for high-rpm accuracy. Just above the reluctor is an adjustable mechanical advance assembly that lets you tailor a timing curve to match your engine's needs. This assembly is TIG welded for strength, and features chromoly weights and nylon pads to ensure smooth advance as the rpm increases. Corvette models feature a vacuum advance, and are available with or without an adjustable slip collar for engines that have had the deck height modified or use exotic intake manifolds. The distributors also feature a Rynite base. The tach drive assembly has a grease fitting for lubrication, is compact to clear the firewall and linkage, and can be repositioned easily to fit different applications. These distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition.
( 10 )
$669.95
$601.95
On Sale
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$468.95
—
$499.95
$421.95
—
$448.95
On Sale
MSD has combined race-winning experience with leading-edge technology to offer these incredible Digital-6 Plus ignitions. The 15 MHz micro-controller can analyze up to 15,000,000 critical instructions per second! That's over three times faster than comparable ignitions. Every spark is packed with 135 millijoules of spark energy and 535 V of power. Built-in features on the MSD Digital-6 Plus ignition include two rotary switch adjustable rev limiters, a single-stage timing retard, a start-up timing retard, an LED fault display, EMI protection, and much more! You get complete combustion for greater power, quicker throttle response, smoother idling, and quicker starts. You always get more power with less current draw.
( 46 )
$649.95
$583.95
On Sale
MSD'S original Pro-Crimp tool is a favorite to many racers and race shops, but even a great design can be made better. The new and improved Pro-Crimp tool delivers the same repeatable crimps that you expect but with an improved chassis. The hardened steel frame features streamlined hand grips with improved leverage to ease the crimp effort. The molded handles also feature a slip-free grip for a secure handle when working. The tool is supplied with crimping/stripping dies for MSD dual crimp spark plug wire terminals. Additional dies sold separately.
( 96 )
$133.95
$120.55
On Sale
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
Not Yet Reviewed
$799.95
$718.95
On Sale
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$184.95
—
$1,099.95
$166.45
—
$898.95
On Sale
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$122.95
$110.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
