Availability
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 303 )
$239.95
$179.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 348 )
$138.95
—
$230.95
$104.95
—
$150.95
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$415.95
—
$573.95
$302.95
—
$315.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$267.95
—
$849.95
$147.95
—
$552.95
On Sale
Everyone loves the look of classic sealed beam headlights, but the dim halogen light output makes nighttime driving a potentially risky endeavor for you and your beloved classic. Holley's new RetroBright LED headlights offer a number of advantages over traditional sealed beam headlights, such as plug-and-play compatibility, better visibility, and 6x longer life. Not only that, but because they are LED, the lights take up less space, create far less heat, and use less power than other headlights. The low-profile housing design fits most shallow headlight buckets found on classic cars without the hassle of cutting or drilling. Holley worked closely with Morimoto, a leader in lighting design, to develop its lineup of lighting solutions that boast a classic look with modern lighting technology. A special PWM LED driver resides inside of the headlight to keep the LEDs running at their peak intensity, even during prolonged periods of use. For example, the 7 in. round LED produces 32,000 Candela for low beam, and 53,000 Candela for high beam, which is nearly three times more light output than your original headlights. RetroBright has offerings to fit most classic and modern vehicles that utilize the popular 5.75 in. round, 7 in. round, 4 in. x 6 in. rectangular, and 5 in. x 7 in. rectangular headlight housings. They're available in 3000 Kelvin and 5700 Kelvin color temperatures, depending on whether you're looking for that classic lighting hue or want an even brighter, more modern look. And if your vehicle feels more at home across the pond, Holley also offer headlights with yellow lenses for that European flair. Additional details: * Plug-and-Play: Plugs into factory headlight harness for easy installation * Classic Styling: Retro styled headlight for period correct appearance * Superior: Over 2x the light output of halogens to keep you and your classic safe * Low Draw/Extended Life: Less current draw and 6x the life of halogen sealed beams * Compliant: No-glare beam pattern meets or exceeds SAE and DOT requirements * Serviceable: Replaceable LED cartridges for easy serviceability * Proper Fitment: Engineered to fit most shallow light buckets found on classic vehicles * Stronger: UV-treated polycarbonate lens won't shatter and is 10x stronger than glass or standard plastic * Compatible: Sealed Beam Trade Numbers: H5054, H6052, H6054 * Color Choice: Available in "Classic White" (3000K bulb) for a warm classic hue, "Modern White" (5700K bulb) for a cleaner modern look, or a Yellow Lens (utilizes 5700K bulb inside)
( 146 )
$149.95
—
$232.95
$82.95
—
$174.95
On Sale
Holley RetroBright LED light bulbs will provide added style and safety all the way around your sweet ride. Not only do these upgraded LED bulbs look brighter and use less power, but they also last longer than traditional bulbs. Holley offers different LED bulb colors (white, red, and amber) for all applications. Choose the bulb color option suited to meet your needs. Key features and benefits: * Polar sensitive LED bulbs * Brighter and longer lasting than traditional bulbs * Operates much "cooler" than traditional bulbs * Retains a more traditional look than other LED bulbs * Offered in two color temperatures of white, as well as red and amber colors
( 15 )
$141.35
—
$176.95
$82.95
—
$108.95
On Sale
Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.
( 8 )
$449.95
$292.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$439.95
—
$466.95
$285.95
—
$303.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
On Sale
Holley C10 steering shaft kits replace a worn stock unit on your 3rd generation GM C10 truck or with an engine swap where additional clearance may be needed. Offered in two styles for early or later trucks, both versions feature sturdy DD-style steel shafts and dual U-joints with plenty of adjustability for your project to ensure everything is exact and safe. Choose the proper C10 steering shaft for your year truck. Features: * Complete bolt-on solution with little or no modifications necessary depending on use * Eliminates factory rag joint providing a precise and responsive steering input * Will also work as a factory replacement steering shaft * E-coat for maximum protection against corrosion * Steel construction with retaining screws on the bearing caps for strength and durability
( 1 )
$213.95
$139.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 246 )
$470.95
$306.95
On Sale
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 4 )
$1,349.95
$742.95
—
$877.95
On Sale
Holley Dominator billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley Dominator billet fuel filters flow an outstanding 260 gph, have -12 AN O-ring connections, and come available in your choice of 10, 40, or 100 micron ratings.
( 8 )
$154.95
$100.95
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
Not Yet Reviewed
$68.25
$44.36
On Sale
Holley HP billet fuel filter replacement elements are for use with your Holley HP billet fuel filter. They're available in your choice of a 10-micron depth media element or 40-micron and 100-micron stainless steel woven mesh elements. Ensure that your fuel filter is preventing contaminants from entering the engine. Update your old unit with a quality replacement element from Holley.
( 13 )
$23.79
$15.46
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 25 )
$580.95
—
$632.95
$348.95
—
$411.95
On Sale
Holley HP billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley HP billet fuel filters are available in a variety of configurations in 100 or 175 gph and 10, 40, and 100 micron ratings.
( 60 )
$149.95
$97.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$517.95
—
$1,099.95
$284.95
—
$949.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: * The steel fuel tanks have a galvanized finish for corrosion protection and good looks * Stock replacement fuel tanks are made to OEM specifications for a great fit * Perfect companions with Holley muscle car EFI modules or Retrofit EFI pump modules * Tank sending unit lock ring is included
( 61 )
$159.95
—
$286.95
$87.95
—
$157.95
On Sale
Shoot for top performance with Holley Sniper shift lights. These compact standalone units allows for endless mounting locations--above a rearview mirror, on the A-pillar, or right in front on the instrument cluster. They are available in black or silver billet aluminum housings with multi-adjustable mounts, and as a direct wire or OBD-II plug connection. The shift lights feature seven super-bright LEDs with five intensity settings (including off). Holley Sniper shift lights also feature: * Smoked front LED and side display lenses for a stealth look when powered off * Simple hookup--does not require the use of a tachometer adapter * Compatible with all 1 to 12 cylinder gas or diesel engines with any ignition system * Adjustable shift point selection in 10 rpm increments * Easy-to-read rpm display and set buttons located on the side of shift light * CAN version has 8 ft. cable with OBDII connector * Direct wire version has 4 ft. wiring harness with non-terminated ends * Available peak recall of maximum rpm achieved * 4.25 in. length, 0.75 in. diameter
( 31 )
$212.95
$117.95
On Sale
Holley steering U-joints are ideal for building custom steering shafts and are available in a wide range of popular sizes for most applications. These components have a steel construction with retaining screws on the bearing caps for strength and durability. These components are manufactured for extreme durability—which makes them ideal for muscle cars, street rods, and custom applications. The black zinc finish looks great and provides corrosion protection. Order the model designed for your application needs.
( 4 )
$59.45
$32.70
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$899.95
—
$1,049.95
$649.95
—
$849.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$159.95
—
$603.95
$87.95
—
$332.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
