Availability
On Sale
Some engine swaps and racing applications do not need the heater, but elimination of the heater is difficult on the 7.3-liter Godzilla engine since the hose inlet and outlet passages are tough to plug and look like a cobbled up mess using traditional hoses, clamps, and plugs. Holley Ford 7.3L Godzilla rear block plug kits include a machined steel billet plug with O-ring seal, mounting bracket, and retaining bolt to block off the rear port with a professional look. Features: * Works with Holley's front/heater block-off kit to block all cooling ports * The plug is designed to handle high pressure and high temperatures--typical conditions of the cooling system * Easy installation without the need to tap holes or fabricate special plugs and caps * Steel plug features a clear zinc-plated finish
Not Yet Reviewed
$19.49
$10.72
On Sale
Holley LS engine air conditioner brackets are designed to help you mount your A/C compressor and tensioner in the correct position. They include the necessary hardware to mount the assembly in place—and require an application-specific installation kit, sold separately. Holley cast aluminum brackets are available for a variety of compressor styles. Choose the model needed for your application.
( 29 )
$257.95
—
$363.95
$167.95
—
$200.95
On Sale
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 86 )
$191.95
—
$333.95
$105.95
—
$217.95
On Sale
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$299.95
$194.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$302.95
—
$357.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$159.95
—
$603.95
$87.95
—
$332.95
On Sale
Holley ignition coil spacers are great for turbo builds or other applications where more ignition coil clearance is needed. They are available for Gen I and Gen V coils. Choose the spacers designed for your coils.
Not Yet Reviewed
$15.47
$8.51
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$695.99
—
$912.95
$494.95
—
$764.99
On Sale
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$499.95
$274.95
On Sale
Holley alcohol jets are specially designed to work with the unique metering blocks of alcohol carburetors. The metering blocks accept the physically larger size of these jets.
( 1 )
$21.20
—
$22.41
$11.66
—
$12.33
On Sale
Holley double adjustable fuel pressure regulators are designed for belt or cable driven pumps where fuel flow changes with engine rpm. Made from billet aluminum, they are offered in 2-port and 4-port models to complete your fuel system requirements, and the idle adjustment design is strategically placed so that none of the ports are blocked, like other designs. Features include: * Compatible with E85 and alcohol * Individual adjustment settings, one for idle and wide open throttle * Fuel pressure adjustability at idle can help prevent flooding at low rpms * Wide-open throttle settings help to prevent fuel starvation at the top end of the rpm range
Not Yet Reviewed
$389.95
$214.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$161.95
—
$230.95
$121.95
—
$150.95
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$415.95
—
$573.95
$302.95
—
$315.95
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$267.95
—
$849.95
$147.95
—
$552.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$439.95
—
$466.95
$285.95
—
$303.95
On Sale
Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.
( 8 )
$449.95
$292.95
On Sale
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 4 )
$1,349.95
$877.95
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 246 )
$470.95
$306.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 26 )
$580.95
—
$632.95
$348.95
—
$411.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$899.95
—
$1,049.95
$649.95
—
$849.95
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,449.95
—
$1,549.95
$797.95
—
$1,007.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$849.95
—
$899.95
$467.95
—
$584.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: * The steel fuel tanks have a galvanized finish for corrosion protection and good looks * Stock replacement fuel tanks are made to OEM specifications for a great fit * Perfect companions with Holley muscle car EFI modules or Retrofit EFI pump modules * Tank sending unit lock ring is included
( 61 )
$159.95
—
$286.95
$87.95
—
$157.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
