Availability
On Sale
Fleece Performance All-Lights-On modules will allow your high beams, low beams, and fog lamps to all be on simultaneously to illuminate the roadway when your high beams are activated. In addition, when your high beams are not on, your low beams and fog lamps will still operate normally. Stay safer, see further, and brighten your nighttime driving experience with a simple installation upgrade of these Fleece Performance All-Lights-On modules.
( 2 )
$27.99
—
$29.99
$23.79
—
$25.49
On Sale
Fleece Performance coolant bypass components are available to service their coolant bypass kits. Depending on the application, these components will be stand-alone items or kits. Keep pushing the limits of diesel performance technology with the Fleece Performance coolant bypass components needed to get you back on the road.
Not Yet Reviewed
$114.99
$97.74
On Sale
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$1,979.00
—
$2,649.00
$1,682.15
—
$2,251.65
On Sale
Plastic OE filters are prone to cracking and fuel leakage. You can eliminate the risk of a cracked filter with Fleece Performance engine-mount fuel filter assemblies that include billet aluminum cap and quick-disconnect fittings. These drop-in replacements lock directly into the stock filter location and utilize a replaceable spin-on Donaldson filter that is easily serviceable. Each kit includes an extra Donaldson fuel filter, further extending the time before you need to purchase an additional filter. Features: * Drop-in replacement for the factory underhood filter * Heavy-duty anodized billet aluminum cap * Heavy-duty anodized billet aluminum quick-disconnect fittings * Steel adapter fitting for the filter * Extra Donaldson filter included
( 1 )
$199.00
$169.15
On Sale
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$649.00
—
$1,099.00
$551.65
—
$934.15
On Sale
Convert to a more convenient spin-on style filter and lower your ongoing filter maintenance costs with Fleece Performance underbed fuel filter assemblies. They upgrade your factory filtration with an anodized billet aluminum filter base and Donaldson spin-on canister-style filter, along with Water-In-Fuel (WIF) sensor, and integral high-flow fuel heater option. There are no additional lines to route, cut, or install, mounting in the factory location and mating directly to all factory fuel lines and WIF sensor circuitry. The Donaldson filter offers improved efficiency at low micron levels, while enduring peak water separation. Select the Fleece assembly designed for your vehicle.
Not Yet Reviewed
$379.00
$322.15
On Sale
You demand more and Fleece Performance PowerFlo CP3 fuel pumps will supply more. How much more? Frankly, these upgraded pumps will support 750 RWHP with the proper complementing modifications. And, not only that, they will also eliminate the factory fuel flow restriction that begins at 3,000 rpm that usually costs you horsepower when you need it most. The law of supply and demand is simple and so is your choice for pumps that supply enough fuel to back 750 RWHP--Fleece PowerFlo CP3 pumps.
Not Yet Reviewed
$1,999.00
—
$2,499.00
$1,699.15
—
$2,124.15
On Sale
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
$84.96
On Sale
Fleece Performance CP3K fuel pump kits are a valuable lesson in supply and demand. Simply put; your diesel engine's demand for more fuel cannot be supplied by your stock CP3 pump, thus its' time for a new supplier--CP3K. These modified pumps are engineered to eliminate the factory fuel flow restriction that usually begins at 3,000 rpm. Your stock pump at this point starts losing fuel flow and rail pressure, which equates to loss of horsepower when you need it most. Reverse the trend; maintain the desired fuel rail pressure through your entire rpm range with cost-effective Fleece CP3K fuel pumps.
Not Yet Reviewed
$1,299.00
—
$1,349.00
$1,104.15
—
$1,146.65
On Sale
Fleece Performance offers fuel filter bypass assemblies for the under hood filter assembly on the Ford F250/350/450/550 6.7L Powerstroke! These assemblies include a heavy-duty anodized billet aluminum bypass block and quick-disconnect fittings. These drop-in replacement fuel filter bypass assemblies are for the factory under hood filter—absolutely no cutting, splicing, or modifications are required. If you are running an aftermarket lift pump or auxiliary fuel filtration and are looking for the cleanest manner to eliminate the crack prone under hood filter, these fuel filter bypass assemblies from Fleece Performance are perfect for you! Product Overview: * Includes heavy-duty anodized billet aluminum bypass block and quick-disconnect fittings * Designed to fit 2011-2024 F250/350/450/550 with 6.7L Powerstroke * The 2011-2016 model trucks use only one inlet and one outlet fitting * For 2017-2024 trucks, an additional quick disconnect fitting is provided for the required additional fuel return * Drop-in replacement for the factory under hood filter—no lines to cut or modify * This product removes the underhood filtration supplied by the OEM and should only be used in conjunction with auxiliary fuel filter systems that meet or exceed the OEM's overall fuel filtration specifications
( 1 )
$148.99
$126.64
On Sale
Fleece Performance offers fuel injector return line repair fittings for a variety of applications. For instance, the plastic factory injector return fitting on the 2011-and-up 6.7L Powerstroke engines is susceptible to breakage from heat, vibration, rough handling, and frequent disconnections for fuel filter maintenance. Upgrade this fitting and eliminate the risk of a broken fuel line with Fleece's heavy-duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting, these injector return fittings will ensure you're not left stranded with a broken, non-repairable fuel line. Additional details: * Heavy-duty, machined billet aluminum housing * Dual O-ring internal design for increased sealing * Serviceable billet aluminum barb fitting * Easy to install and remove * Sold individually or in a set of 5 * Application notes: Kits are designed to work with both OEM and aftermarket underhood fuel filter assemblies
( 2 )
$64.99
—
$349.95
$55.24
—
$297.46
On Sale
Due to the routing, exposure, and general lack of protection on the small charging circuit sense wires that are routed from Powertrain Control Module (PCM) to the alternator, it is common for wire damage to be experienced. And if the charging circuit MIL illuminates intermittingly or continuously on your truck dash, this may be your problem. A Fleece Performance charging circuit harness is your fix. These harness solutions are drop replacements—no cutting or splicing--for failed factory harnesses causing the problem. Each one installs directly in-line with factory connections, allowing you to reroute the alternator connection along the top side of the engine, and avoiding the unprotected channel routing on the underside of the engine. Designed and produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the road quickly.
Not Yet Reviewed
$125.99
$107.09
On Sale
Upgrade your fuel system with these Fleece Performance fuel filter delete blocks. If you have an aftermarket fuel filtration system, such as an Air Dog or a FASS, your factory fuel filter is no longer necessary—is only becomes an extra restriction and an eyesore. These delete blocks will remove that restriction and help clean up under the hood of your truck. They mount perfectly to allow the factory fuel return lines to be used without any relocating or bending. The blocks also feature a port for the factory WIF (water in fuel) sensor and a 9/16-18 O-ring port for a dual CP3 return line.
( 2 )
$79.25
$67.36
On Sale
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
$16.99
On Sale
Here's the problem: On the L5P Duramax, because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely cleaned or replaced. The solution is Fleece Performance MAP sensor spacer kits. Fleece's spacer moves the sensor from the direct intake air stream to reduce soot buildup over time and eliminates the need to routinely clean or replace the sensor. The spacer block also integrates a 1/8 in. NPT port to allow for installation of an auxiliary boost pressure sensor. Fleece Performance kits include mounting block, fastener, seal ring, and O-ring port plug.
Not Yet Reviewed
$68.99
$58.64
On Sale
Fleece Performance quick-connect fittings allow you to install AN style fuel lines to the factory quick-connect fuel lines. They are constructed out of aluminum and are black anodized for durability and corrosion-resistance. Fleece Performance quick-connect fittings feature a short hex height to maximize installation clearance.
Not Yet Reviewed
$14.99
—
$17.99
$12.74
—
$15.29
On Sale
If you've upgraded from your factory mechanical lift pump to an electric pump, a Fleece Performance mechanical fuel pump block-off plate will eliminate the void left by your stock pump. These billet aluminum block-off plates come complete with the bolts, cover, and O-ring for easy installation.
Not Yet Reviewed
$34.99
$29.74
On Sale
Fleece Performance billet rocker arm bridges offer a massive 2.5 times strength improvement over factory bridges for your diesel. They are machined from billet 8620 steel, surface ground for flatness, case hardened, and carburized. The rocker arm bridges also provide improved oiling to the valve stems, and they are branded with the Fleece Performance "F".
( 2 )
$467.43
—
$512.54
$397.32
—
$435.66
On Sale
Fleece Performance transmission cooler and line kits are drop-in replacements that deliver a massive 2 times increase in heat rejection and efficiency vs. stock! Control your transmission temperatures and tow with confidence with the latest improvement for your truck from Fleece Performance. Engineered from the ground up, these kits provide you with the most efficient and highest performing transmission cooler on the market, plus heavy-duty transmission lines and AN fittings for a leak-free installation. Fleece transmission cooler and line kits are the most complete options available to keep your rig running cool! Select the kit designed for your truck. Additional features: * Drop-in replacement for the factory transmission cooler * No cutting or splicing of OE lines * 20 percent increase in face area of the transmission cooler vs. stock * 100 percent pressure and leak tested
Not Yet Reviewed
$859.00
—
$1,479.00
$730.15
—
$1,257.15
On Sale
Fleece Performance turbo drain flange adapters are precision-machined from 6061 aluminum and finished with black anodize. A component of their drain tube kits, Fleece offers these same pieces individually to keep the connection between your turbo and the factory drain location on your block leak-free. Order the adapter recommended for your turbocharger make and model.
Not Yet Reviewed
$12.95
—
$34.99
$11.01
—
$29.74
On Sale
Fleece Performance regulated return systems take their standard fuel distribution blocks to the next level by fully integrating a high-flow pressure regulator. This feature, in combination with high-flow aftermarket electric fuel pumps (without built-in pressure regulation), provides more consistent fuel pressure at the CP3. The kits also have one additional return line port and one additional feed line port. The extra return line port allows you to remove the factory fuel pressure relief valve hard line and fuel injector return galley hard line to provide clearance for high-flow side draft intakes, common on competition engines. If you're looking for something beyond your average fuel distribution block, Fleece Performance regulated return systems are your answer.
Not Yet Reviewed
$618.10
$525.38
On Sale
Some L5P 6.6L Duramax vehicles have a secondary MAP sensor. The problem: Its direct placement into the intake air stream from the factory causes the soot buildup to become an ongoing maintenance problem, requiring routine cleaning or replacement of the sensor. The solution: Fleece Performance secondary MAP sensor spacers. They move the sensor from the direct intake air stream to reduce soot buildup over time and eliminate the need to routinely clean or replace the sensor. Each kit includes mounting block (spacer), fastener, and O-ring.
Not Yet Reviewed
$68.99
$58.64
On Sale
Fleece Performance valve cover conversion harnesses are available to convert your 6-pin injector connector to a 4-pin or vice versa. These harnesses are designed for early or late rocker box styles, plug into the factory harness, are designed to run on backside of engine, and the factory connector goes under the intake shelf. They produced in-house at Fleece with their manufacturing process including fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts needed. Select the harness designed for your truck's rocker box style.
Not Yet Reviewed
$139.99
$118.99
On Sale
The LML Duramax was not originally equipped with a fuel heater, making it prone to fuel gelling in cold temperatures. Fleece Performance auxiliary heated fuel filter kits mount in the factory location, providing for a direct factory replacement and the peace of mind to tackle the coldest of days with a high-flow fuel heater. These kits replace the factory fuel filter housing with a new filter base, integral high-flow fuel heater, Water-In-Fuel (WIF) sensor, and Donaldson spin-on canister style filter. The filter base eliminates the factory fuel primer bulb and is intended for use with a positive pressure lift pump, such as Fleece's PowerFlo lift pump or alternative frame mounted pump. Kit includes: * Fuel filter base with integral fuel heater and fittings * Donaldson 3 micron fuel filter and water separator * Pre-formed hose and hose clamps * Wiring harness and fuse taps * Water-In-Fuel (WIF) sensor and adaptation harness
Not Yet Reviewed
$399.00
$339.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
