Availability
On Sale
DEI Easy Loom master kits are designed to give your vehicle's engine compartment a clean, professional look—while also protecting any exposed wires, cables, and hoses. These synthetic convoluted tubing "sleeves" come in a variety of lengths and diameters for your automotive and powersports applications. DEI Easy Loom master kits features and benefits include: * Protects against abrasion, chemicals, and the elements * Superior in style and function to plastic tubing * Self-closing split design with 30 percent overlap * Resists most automotive fluids and chemicals * Peak temp rating 347 degrees F (melting point 500 F) * Approved by most car manufacturers Kit includes: * Different diameter Easy Loom sleeves * Heat shrink tube ends * Locking ties * Electrical and silicone tape
( 13 )
$111.99
$100.79
On Sale
DEI high-temperature 3:1 shrink tubing is a professional-grade, flexible, flame-retardant polyolefin sleeving. It provides excellent electrical insulation and protection from dust, solvents, and other foreign material, as well as strain relief. It slips easily over wire connectors and shrinks down to 33 percent of its original diameter to fit snugly over wires and connectors for a watertight seal without a reduction in tube length. DEI high-temperature 3:1 shrink tubing can be used to insulate wires, connections, and terminals—and it meets the material and function properties of Mil-spec DTL-230535C. Available in a variety of diameters, lengths, and quantities, DEI high-temperature 3:1 shrink tubing will make a great addition to any electrical system.
( 3 )
$23.99
—
$182.99
$21.59
—
$164.69
On Sale
DEI Cool Cover GOLD air tube covers can solve the problem of heat soak in air tubes and cold air intakes. Cool Cover Gold is a high-temperature metalized polyimide lamination, bonded to a robust heat-treated glass fiber material to reflect radiant heat from air tubes. This heat barrier promotes a cooler, denser air charge for added power, and is designed to fit up to 4 in. diameter tubing. Made with the convenience of a unique hook-and-loop closure design along the open edges, this air intake insulator by DEI installs and removes in seconds for show or go!
Not Yet Reviewed
$79.99
$71.99
On Sale
Clearance
DEI Hi-Temp spark plug wire and boot shrink tubes offer first-rate protection for your ignition wires and boots, forming a watertight seal with a 3:1 shrink ratio. They're a great alternative to tape and plastic ties for bundling wires and adding moisture protection on electrical components. DEI Hi-Temp shrink tubes are easy to install--an ordinary heat gun is all you need to achieve a clean and professional look! These wire and boot shrink tubes are offered in a choice of colors to best complement your engine and accessories.
( 3 )
$16.99
$15.29
On Sale
DEI air tube cover kits are designed to prevent air tubes from becoming heat sinks. Made of heat-treated fiberglass with a reflective coating, the air tube covers will reflect heat away from the air tube and allow cooler air to be introduced into the intake for a denser air/fuel charge. They can be installed/removed in seconds without the use of tools by a full-length hook-and-loop closure system. DEI air tube covers are available in a 36 in. long x 14 in. wide that can easily be cut to size for smaller applications.
( 7 )
$62.99
$56.69
On Sale
DEI heat shrink tubes with adhesive are flexible, flame-retardant polyolefin insulating sleeves. A thick wall modified adhesive melts with heat, encapsulating and sealing components inside to form a watertight seal. This tubing is recommended for applications that require waterproofing for light cable and wire harnesses, as well as protection of connectors. Additional details (unless otherwise noted): * 19mm inside diameter shrinks to 6mm * High-grade military spec * 2 ft. length * Operating temperature: -67 to +257 degrees F
Not Yet Reviewed
$11.99
$10.79
On Sale
DEI Easy Loom split wire sleeves offer a clean, classy look that protects. Easy Loom delivers superior protection for exposed wires, cables, and hoses. They're a perfect fit for trucks, SUVs, and powersports vehicles, including ATVs and UTVs. The monofilament/multifilament woven sleeves are more stylish and provide better function than simple plastic tubing; plus, their split design makes installation easier—there's no need to disconnect wires. DEI Easy Loom sleeves are available in multiple diameters and lengths to protect any wires from abrasion, chemicals, and the elements.
( 19 )
$15.99
—
$260.99
$14.39
—
$234.89
On Sale
DEI RFI Shield sleeves reduce Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) from ignition systems and high voltage wires that can affect computer systems, electronic fuel injection, radios and other sensitive components. Electronic fuel injection systems thrive in an environment free from RFI. RFI Shield sleeves safeguard the delicate electronic components, optimizing fuel delivery and engine performance. Drive with confidence, knowing that your vehicle's critical systems are shielded from interference that can compromise safety and performance. RFI Shield sleeves are available in 1/2 in. and 1 in. diameters, in 3 ft. lengths. Additional details: * Non-adhesive tape wraps around wires without having to disconnect them * A 17.5 in. grounding strap included * Tape comes in 1 in. width and 25 ft. length * Includes DEI Quick Fix Silicone Tape to seal ends * Great for bundling wiring larger than 1 in. diameter
( 3 )
$38.99
—
$48.99
$35.09
—
$44.09
On Sale
Keep your investment safe! DEI EV charge cord covers are designed to wrap around your electric vehicle charge cord, providing a durable layer of protection against daily wear and tear—and ensuring your investment stays in top-notch condition. Their vibrant orange color makes the charge cords easily visible, preventing tripping hazards and potential damage. Robust construction ensures resistance against weather, UV rays, and everyday abrasions, offering unparalleled durability. Each cord is split-sleeve designed for hassle-free setup, so you can start enjoying the benefits of added protection and visibility in minutes. Additional notes: * Includes DEI Quick Fix Silicone Tape to seal ends * Fits 3/4 in. to 1 in. diameter charger cables and comes in 20 ft. length * Passes UL94, FMVSS302 flammability tests
Not Yet Reviewed
$73.99
$66.59
On Sale
Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI has introduced a revolutionary advancement in Titanium pipe shield with LR technology that greatly outperforms Mylar-backed glass fiber shields. This exhaust wrap combines the high-heat tolerance of DEI's proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900 degrees F, with the Mylar outer material cracking and flaking off. DEI's titanium pipe shield provides heat protection up to 1,350 degrees F. LR fiber is a two-ply material. The outer layer is made from lava rock pulverized and stranded into a proprietary, tightly woven weave for durability and strength. The inside material is made of a special high temperature-resistant fabric (89 percent silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology, combined with DEI's unique shield standoff bracket design, provides an air gap between the shield and pipe that maximizes the potential for cooling and heat dissipation. With the strategic placement of DEI titanium exhaust wrap near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks, or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.
( 47 )
$48.99
—
$82.99
$44.09
—
$74.69
On Sale
DEI Protect-A-Boot and Wire kits provide you with everything that you need to protect your ignition wire sets. The kits contain all of the benefits of Protect-A-Wire, packaged with color-matched Protect-A-Boots. They are available in four vivid colors for both 2- and 8-cylinder kits. The 2-cylinder kits include 7 ft. of Protect-A-Wire sleeving, six Hi-Temp shrink tubes, and two Protect-A-Boots. The 8-cylinder kits include 25 ft. of Protect-A-Wire sleeving, 25 Hi-Temp shrink tubes, and eight Protect-A-Boots.
( 2 )
$87.99
—
$182.99
$79.19
—
$164.69
On Sale
DEI ONYX Series pipe shields provide two layers of exhaust thermal performance that outperforms conventional shields and looks great. The dual layers consist of an outer layer made from heat-treated glass fiber that is bonded with molten aluminum and then formed into a tight weave for durability and strength. The inner layer is made of a specially treated, high-temperature resistant fabric (89 percent silica) designed to withstand some serious exhaust heat. The outer edges are finished off with a surge stitch for durability and all hardware is stainless steel. The result of this proprietary textile technology and DEI bracket design is very good thermal performance up to 1,350 degrees F, with an eye-catching rich black finish.
( 5 )
$42.99
$38.69
On Sale
DEI Heat Sheath sleeves are made from high-temperature fiberglass fabric bonded to aluminized material and then sewn into a tube. Designed to slide over wires and hoses, these sheaths can be easily shaped to fit the tightest bends. They will reflect up to 90 percent of the radiant heat and can insulate against up to 500 degrees of direct, continuous heat. They can be easily cut to length with scissors or a sharp knife and come in five popular diameters from 3/4 in. to 1 1/4 in., in 3 ft. lengths. They are also available in bulk, up to 50 ft. rolls.
( 91 )
$13.99
—
$249.99
$12.59
—
$224.99
On Sale
DEI offers Titanium Protect-A-Wire kits that are designed to provide exceptional thermal protection for spark plug wires, lines, and hoses from extreme engine and exhaust heat using proprietary Titanium LR fiber technology. These Protect-A-Wire kits can withstand direct heat up to 1,800 degrees F and radiant heat up to 2,500 degrees F, preventing wire burnout, hardening, and cracking. The Protect-A-Wire kits from DEI also offer oil and chemical resistance, a professional appearance, and include numbered high-temperature heat-shrink tubes for a secure, water-tight seal, making them ideal for high-performance and street applications. Key features and benefits: * High-quality material—constructed from a high-temperature resistant basalt fiber material, ensuring long-lasting protection * Extreme heat resistance—the Titanium LR fiber material can withstand extreme temperatures, protecting vital components from direct and radiant heat from exhaust manifolds and headers * Prevents wire damage by shielding spark plug wires, hoses, and electrical cables from high under-hood temperatures, these kits prevent burning, cracking, hardening, and short circuits * The protective sleeves are resistant to oil and various chemicals, further enhancing its durability in a harsh engine bay environment * Professional looking finish—the kit adds a clean, custom, and professional look to the engine bay, complementing the color and weaving of the sleeve * Easy installation—the kits include heat-shrink tubes that provide a professional and secure, water-tight seal on the ends of the sleeve * Versatile application—in addition to spark plug wires, the sleeves can be used to protect various lines and hoses, such as fuel lines, oil lines, and speedometer cables
( 13 )
$101.99
$91.79
On Sale
DEI's Boom Mat Flex damping materials are for applications which require a damping material that can conform to odd shapes and tighter bends than the standard Boom Mat. This product is made from the same high-quality 2.5mm thick butyl rubber, but with a clear poly surface—and it can be used to form around tight curves, inside wheel wells, around tubing and pipes, and other areas where Boom Mat aluminum may not conform easily. The aggressive adhesive backing allows this flex material to be shaped and secured firmly around any surface, reducing noise and vibration, while adding cooling insulation for a quieter more comfortable interior. Key features and benefits: * Great for wheel wells and around tubing and pipes * Peel-and-stick installation maintains stickiness through temperature extremes * 12 in. x 12 in. squares (available in 2, 4, or 10 sq. ft. applications) * Can be trimmed for exact coverage (DEI-050216 blade lock knife recommended) * Corrosion-resistant and weatherproof
Not Yet Reviewed
$51.99
$46.79
On Sale
Protect-A-Wires from DEI provide thermal protection for various under-hood components, such as spark plug wires, electrical wiring, and hoses, by shielding them from extreme engine and exhaust heat that can cause cracking, hardening, or burning. Basic sleeves are made from the same fiberglass composite as Protect-A-Boots to resist high temps. Upgrade kits include materials such as silicone and titanium for even greater heat insulation. To install, simply remove the distributor boot and connector, then easily slide on your Protect-A-Wire covering over the spark plug. This tubing can also be used to wrap speedometer cables, electrical wiring, and hoses. Multiple diameters, lengths, and colors are available. Product Overview: * Durable construction, made from high-temperature resistant materials * The titanium versions are resistant to chemicals and oils, offering comprehensive protection in various engine environments * Can be used to protect a wide range of components, including spark plug wires, fuel and oil lines, and speedometer cables, and are suitable for various vehicles from street cars to Powersports and marine applications * Shields sensitive components to prevent burning, cracking, and hardening of spark plug wires, electrical wiring, and hoses caused by severe under-hood temperatures, saving on replacement costs * The sleeves are designed to easily slide over existing wires and cables * Provides a professional-looking finish under-the-hood of your vehicle
( 3 )
$10.99
—
$43.99
$9.89
—
$39.59
On Sale
Avoid hot or lukewarm drinks in your car. DEI drink bottle insulation covers keep your drinks cooler longer. They're designed to fit the Longacre 22551 drink bottle—and they cover the entire bottle, holder, and drink tube. Each beverage hugger is made from premium neoprene material for outstanding insulation properties and a long-lasting, durable life.
Not Yet Reviewed
$117.99
$106.19
On Sale
DEI Reflect-A-Cool heat shields are sheets of reflective material with an adhesive back which offers outstanding protection against extreme heat. A combination of fiberglass and an aluminized layer of reflective foil, Reflect-A-Cool heat shields are ideal for firewalls, marine engine bays, RV "dog house" or in the tub of a racecar where typical mechanical fasteners cannot be used. Reflect-A-Cool will reflect up to 1,000 degrees F and will protect against a direct continuous temperature of 400 degrees F. They offer superior protection against radiant heat, a self-adhesive application for easy installation, and can be easily trimmed and cut to fit--virtually no clearance needed.
( 25 )
$64.99
$58.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
