Availability
On Sale
APR carbon fiber front trim pieces accentuate the front-end of your Volkswagen MK8 GTI with sexy gloss carbon fiber that matches other APR body part components. The new trim pieces surround the lower grille, offering a subtle enhancement that's not too over-the-top. These components work perfectly with APR's other body kit pieces. Additional details: * Gloss carbon fiber twill * Side and center pieces * Motorsport look without being too over-the-top * Plug-and-play design
Not Yet Reviewed
$699.95
$384.95
On Sale
APR carbon fiber intercooler ducts for the Porsche 992 3.0T dramatically lower intake air temperature (IAT) by increasing airflow through the ambient air path of the intercooler cores. In doing so, the engine makes more power and sustains power levels for longer—as IAT is kept away from the knock threshold of the engine and IAT-based power reduction safety routines of the factory ECU. Multiple back-to-back wide-open-throttle acceleration tests proved APR intercooler ducts reduced IAT as much as 9.6 degrees C (17.3 degrees F) or 15 percent better than stock! The APR intercooler ducts are made from carbon fiber, allowing the cooling ducts to be formed to the exact shape necessary to fit into the tight engine bay within the 992's rear-end. The vents allow for maximum flow through the system, while continuing to connect the system to the rest of the factory ducting. Everything simply slides into place with no extra hardware required. A gorgeous matte finish with a gloss APR logo adorns the system, giving it a motorsport-inspired feel, which is unfortunately tucked out of view with the rear bumper installed. Testing: The 911 must be tested on the street, rather than a dyno, to capture real world cooling data. This is especially true because of the rear engine design. In real world driving, air is forced through the cooling ducts differently than it is on a stationary dyno, even with excellent cooling fans. During development, APR engineers fully instrumented the engine to find the limitations of the factory hardware. It was quickly determined the factory intercoolers struggled with airflow through the ambient cooling paths. By redesigning the cooling ducts, more high-pressure ambient air could be forced through the system to maximize effectiveness of the coolers. To illustrate their importance, wide open throttle acceleration tests were conducted for roughly 11 seconds, both with stock cooling ducts and APR cooling ducts. IAT was measured post-intercooler with high-quality thermocouples. Ten back-to-back tests were conducted with each setup, and the results were averaged together. With the stock ducts in place, IAT rose to 66.2 degrees C (151.2 degrees F). This is above the factory knock threshold of 60 degrees C (140 degrees F) and is approaching the ECU power reduction limiter at 70 degrees C (158 degrees F). Once this IAT threshold is crossed, the ECU will begin aggressively reducing engine power to protect the engine. By simply swapping to the APR intercooler ducts, IAT dropped 15 percent, or 9.6 degrees C (17.3 degrees F), leveling off at 56.6 degrees C (133.9 degrees F). This is below the knock threshold and safely away from the power reduction threshold! APR Intercooler ducts are a simple and cost effective upgraded to the 992 3.0T and should be considered by any customer, at any stage of performance, looking to maximize the performance of their 911! Product features: * Improved intake air temperature (IAT) by 15 percent over stock * Organic matte carbon fiber design with gloss APR logo * Lightweight material and design * No extra hardware required * Plug-and-play upgrade * Retains factory intercooler post-housing ducting * Excellent performance per dollar upgrade for the Porsche 911 * Emissions compliant
Not Yet Reviewed
$699.95
$384.95
On Sale
APR cat-back exhaust systems personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty
Not Yet Reviewed
$1,399.95
—
$1,599.95
$769.95
—
$879.95
On Sale
Upgrade your tunnel brace to improve rigidity and increase clearance to fit larger exhaust systems. Factory stamped steel tunnel braces unfortunately leave much to be desired. APR has redesigned these 6061 aluminum braces to sit slightly lower in the tunnel to allow for larger exhaust tubing. As an added benefit, the CNC-bent laser-cut braces add additional structural rigidity to the chassis! Tunnel brace model EXH0321 fits C7 chassis A6/7, S6/7, RS6/7.
Not Yet Reviewed
$109.95
$60.95
On Sale
APR braided stainless steel brake line upgrades are a direct-fit replacement that improves your braking experience with the best lines on the market today. Forget the factory rubber hoses that expand and can even rupture over time. These braided 304 stainless steel lines with a smooth-bore PTFE core allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel, as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, APR brake lines are application-specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive PVC outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft at 1,000 psi and 0.11 cc/ft at 2,900 psi. They're compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. Order the lines recommended for the front and/or rear of your vehicle.
Not Yet Reviewed
$139.95
—
$209.95
$76.95
—
$115.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
