Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
AEM Electronics Rincon Power High-Voltage Contactors
HV (high-voltage) contactors are widely used in electric vehicles (EV) and hybrid electric vehicles (HEV). AEM Electronics offers a couple of choices in this area with their Rincon Power high-voltage contactors. One is a low-cost, pre-charge solution that meets RoHS 2011/65/EU and is PCB (printed circuit board) mountable. The other is hermetically sealed with gas fill and has an integrated coil economizer to reduce coil holding power. It meets RoHS 2011/65/EU, is CE certified, and IEC60947-4-1 compliant. Choose the one needed for your application.
Not Yet Reviewed
$56.65
$31.95
On Sale
AEM Electronics Tru-BoostX Gauge-Type Controller Kits
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$389.95
$350.95
On Sale
AEM Electronics Wideband UEGO Sensors
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$113.95
$102.55
On Sale
AEM Electronics Water/Methanol Injection Solenoids
AEM Electronics water-methanol injection solenoids eliminate any chance of water-methanol flow into the inlet when the WMI system is not engaged. This affordable water-methanol injection accessory features high-flow capability (3,600cc/min.)—and an impressively low current draw of only 0.75 amp that does not require the use of an additional relay. The valve body features include 1/8 NPT ports with included push-to-lock 1/4 in. hose fittings for easy connection, and EPDM seals that stand up to corrosion for years of reliable use. It's an inexpensive insurance policy to protect your high performance engine, regardless of the brand of water-methanol injection system you're using.
( 5 )
$127.95
$115.15
On Sale
AEM Electronics 22-Channel CAN Sensor Modules
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$423.95
$380.95
On Sale
AEM Electronics Universal High-Flow Inline Fuel Filters
Designed with racers in mind, AEM Electronics universal high-flow inline fuel filters can process an astounding 12.32 gpm at 45 psi and 2.63 gpm at 6 psi. This maximum flow and filtration ensure top performance when using gasoline, alcohol, or blended fuels. The housing is machined from 6061-T6 billet aluminum and then hard anodized black, while all sealing gaskets and O-rings are made of Viton®, proven to resist chemicals and extreme temperatures. The end caps have been machined with -10 AN female fittings and an O-ring receiver groove. Inside, the fabric element can filter as low as 7 microns. AEM Electronics universal high-flow inline fuel filters measure 2 in. O.D. by 10 in. long for an easy and versatile installation. Replacement filter cartridges are commonly available, sold separately. Clean fuel means better performance—trust the AEM racing solutions that are engineered to outperform!
Not Yet Reviewed
$149.95
$134.95
On Sale
AEM Electronics Water/Methanol Injection Filters
AEM Electronics offers a cleaner flow of water/methanol for your engine with their injection filters. Their filters not only protect the internals of your engine, but the working components of the water/methanol pump as well! Your AEM injection kit is a great, low-cost way to increase the power of your gas or diesel engine, and using their water/methanol injection filters will help to increase pump life. Built from rugged polypropylene, these filters are easy to install, completely serviceable, and fit most systems on the market today. The stainless steel mesh strainer filters foreign particles as small as 40 microns without significant reduced flow. Feed your engine clean fuel with AEM Electronics water/methanol injection filters.
( 7 )
$51.19
$46.07
On Sale
AEM Electronics EV Combined Charging Units
AEM Electronics EV combined charging units (CCU) simplify the electric vehicle (EV) drive system. The units merge an on-board charger (OBC) and a DC-DC converter (DCDC). The OBC charges the HV battery pack by taking 120 V or 240 V AC energy from the grid, converting it to high-voltage DC and charging the high-voltage battery in the vehicle. The DC-DC converter takes the high-voltage from the battery pack and converts it to low-voltage to maintain the charge in the vehicle's 12 V battery, and performs the duties that the alternator does in an internal combustion engine (ICE) vehicle. The combined charging units are fully controlled by the VCU via the CANbus and the OBC and DC-DC report voltage, current, and status information back to the VCU. The AEM EV CCUs are very compact and lightweight, while offering high efficiency, stable charging, long life, a high-protection level, and high reliability. They are 100 percent driven via CAN by the VCU in conjunction with the BMS-18, and is not directly controlled by the charge plug connector or the off vehicle EVSE (Electrical Vehicle Service Equipment). Features: * 6.6kw (32 amps) on-board charger + 2.5kw DC-DC converter * 350 Vdc nominal output and up to 450 Vdc maximum * Plug-and-play with AEM's EV controls * Liquid cooled and temperature controlled for efficient thermal management * Lightweight (5.5kg, 12 lbs.) compared to typical units at 18 to 24 lbs. * Compact design--2.5 to 3x smaller than comparable units * The HV battery charger is rated at 93.5 percent efficiency at full load * The DC-DC LV output is rated at 91.5 percent efficiency at full load with a maximum continuous DC-DC output of 178 amps at 14 V * The CCU has the following protection functions: -- Input over and under voltage protection -- High-voltage output over and under voltage protection -- High- and low-voltage output short circuit protection -- Over temperature protection
Not Yet Reviewed
$2,817.95
$2,535.95
