Availability
On Sale
AEM Electronics water-methanol injection solenoids eliminate any chance of water-methanol flow into the inlet when the WMI system is not engaged. This affordable water-methanol injection accessory features high-flow capability (3,600cc/min.)—and an impressively low current draw of only 0.75 amp that does not require the use of an additional relay. The valve body features include 1/8 NPT ports with included push-to-lock 1/4 in. hose fittings for easy connection, and EPDM seals that stand up to corrosion for years of reliable use. It's an inexpensive insurance policy to protect your high performance engine, regardless of the brand of water-methanol injection system you're using.
( 5 )
$124.95
$112.45
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
On Sale
These AEM Electronics boost control solenoid kits will not degrade rich fuel mixtures like most common boost control solenoids. This will significantly extend life and eliminate the chance of sticking from contamination. They are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection. AEM also includes the barb-style hose fittings where push-on fittings are required.
( 5 )
$135.95
$122.35
On Sale
AEM Electronics high-volume fuel rails feature a 1/2 in. fuel bore capable of flowing enough fuel to support most high-horsepower applications. Their large bore also dampens back pulses created by larger injectors and works perfectly with stock injector sizes. An additional port is included to accommodate a nitrous setup or fuel pressure gauge. Instructions, hardware, fittings, and injector O-rings are also included.
( 7 )
$159.95
—
$173.95
$143.95
—
$156.55
On Sale
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$222.95
—
$328.95
$200.65
—
$296.05
On Sale
Designed with racers in mind, AEM Electronics universal high-flow inline fuel filters can process an astounding 12.32 gpm at 45 psi and 2.63 gpm at 6 psi. This maximum flow and filtration ensure top performance when using gasoline, alcohol, or blended fuels. The housing is machined from 6061-T6 billet aluminum and then hard anodized black, while all sealing gaskets and O-rings are made of Viton®, proven to resist chemicals and extreme temperatures. The end caps have been machined with -10 AN female fittings and an O-ring receiver groove. Inside, the fabric element can filter as low as 7 microns. AEM Electronics universal high-flow inline fuel filters measure 2 in. O.D. by 10 in. long for an easy and versatile installation. Replacement filter cartridges are commonly available, sold separately. Clean fuel means better performance—trust the AEM racing solutions that are engineered to outperform!
Not Yet Reviewed
$145.95
$131.35
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
—
$420.95
$64.95
—
$377.95
On Sale
AEM exhaust backpressure install kits are specifically designed to give accurate backpressure readings, without sacrificing sensor longevity due to extreme operating conditions. Designed for use with their 4-channel wideband UEGO controller, you get precision readings for ultimate performance using AEM exhaust backpressure install kits. Kits include: * Stainless steel 100 psig pressure sensor * Stainless steel standoff tube with fittings * Stainless steel braided hose * Weld-on/threaded bung.
( 1 )
$368.95
$332.05
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
—
$199.95
$78.45
—
$179.95
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
On Sale
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.
( 11 )
$93.69
$84.35
On Sale
AEM Electronics offers high-quality stainless steel PSIa sensor kits in 15 (1 BAR), 30 (2 BAR), 50 (3.5 BAR), 75 (5 BAR) and 100 (7 BAR). PSIa is referenced to absolute zero—the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 psi when the sensing element is exposed to atmospheric pressure at sea level; however, they can be recalibrated to read zero at atmospheric, and a negative number at values less than atmospheric pressure.
Not Yet Reviewed
$184.95
$166.45
On Sale
AEM water/methanol injection pumps help to increase the power of your engine. These recirculation-style pumps make great replacements for most water/methanol kits. Or, use them when creating your own special setup. AEM upgrades their pumps to ensure consistent fluid delivery for optimum performance with no erratic on/off pulsing, unlike older switched-styles. Their water/methanol injection pumps are designed with Santoprene diaphragms and EPDM seals to withstand the harshest of alcohol mixes. For better performance, consider an AEM water/methanol injection pump.
( 11 )
$199.95
$179.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
