Availability

Manufacturer Rebates

Buy now and earn money back later with mail-in rebate offers from your favorite aftermarket brands!

Individual Parts

Part Groups

Results 1 - 3 of 3

Manufacturer Rebate

Clearance

Artec Industries Inner Fenders

Artec Industries inner fenders protect your wheel well compartments from dirt and debris in customizable, rugged style. They allow use of larger tires and can be used with most aftermarket fenders. Artec's proprietary process of stamping their distinctive logo adds an additional style element and increases the overall rigidity. Artec Industries inner fenders are available in pairs (driver and passenger side) for the front and rear. Front models are available in three styles: solid, vented, and Freedom. Order the pair(s) that match your Jeep application. Features and notes: * Proprietary A-blade stamping process for increased rigidity * Lightweight 1/16 in. aluminum construction * CNC laser-cut and CNC-bent for precise fit * Solid rear inner fenders compatible with OEM fenders; front models typically require some trimming * Mounts to OEM holes on sub-frame plus additional holes to be drilled (see instructions for hole locations to determine if modification will be necessary with aftermarket fenders) * Front 2- and rear 4-piece construction per side for lower cost of shipping * Pressed PEM nuts on seam between pieces for easy installation * Shipped as bare, unfinished aluminum for decreased cost—and so you can paint or powdercoat to fit your style (while aluminum is corrosion-resistant, it is recommended to have some type of coating for long-term protection) * Small scratches from raw factory material, manufacturing process, or shipping process may be present

Not Yet Reviewed

$362.99

$199.50

—

$329.99

Manufacturer Rebate

Chevrolet Performance L8P 6.6L 400 C.I.D Engine Assemblies

By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.

Not Yet Reviewed

$8,948.80

Manufacturer Rebate

Artec Industries Aluminum Mid Arm Kits

Artec Industries aluminum mid arm kits are available for a variety of front and rear Jeep JK and JL applications. Five years of testing assured Artec engineers that 7075 aluminum links could handle the abuse of both extreme, heavy-duty rock crawling and normal daily driving. These mid arm kits begin with 2.0 in. O.D. aerospace-grade aluminum lower links, front and rear; 1.5 in. O.D. upper links are only included in select kits. The links are outfitted with Rock Krawler brand joints with a 1.25 in. thread on the lowers (and 7/8 in. thread on the uppers, where applicable) with matching jam nuts. Each link is threaded both a right-hand and left-hand thread at opposite ends, so it's easy to adjust the length for fine-tuning. The real advantage of aluminum link suspensions is the weight savings. Each link weighs only a few pounds, versus steel links, which can be dozens of pounds. This weight savings means better fuel mileage, less wear and tear on your vehicle and its components, an easier install and less maintenance. Aluminum also is naturally rust-resistant, so you don't have to continually paint them. (Springs, shocks, limit straps, sway bar extensions, extended brake lines, and adjustable track bars are not included in these kits; and they will be needed. Upper links included only where specified. OEM wheels cannot be used with the kits.)

Not Yet Reviewed

$1,209.99

—

$2,309.99

1

Page 1 of 1