Free Shipping on Orders Over $125 at Summit Racing

Manufacturer Rebate

Nitrous Express Stage 6 Nitrous Systems

If you have a carbureted vehicle and you're on a budget or are just getting started, Nitrous Express Stage 6 nitrous systems could be the ideal beginning point. They're tunable to deliver power boosts in six graduated increments, from 50 hp all the way up to 300. That means you can pick one of the lower increases for an engine that's close to stock, and then ramp things up later on when you add forged pistons. Systems include: * Nitrous distribution plate * Supply hose and fittings * Solenoids * Switches * Wiring * Jets * Mounting hardware * Race fuel required for increases above 150 hp

4.0 out of 5 stars ( 8 )

$750.64

—

$992.20

Manufacturer Rebate

BFGoodrich Mud-Terrain T/A KM3 Tires

BFGoodrich Mud-Terrain T/A KM3 tires are made to mud, built to climb, and created to conquer. These next-generation tires feature an advanced compound, tread design, and race-proven technologies that will allow you to power through mud and loose soil, tackle the toughest terrains, and go places others only dream of. BFGoodrich Mud-Terrain T/A KM3 tires feature: * Krawl-Tek compound--designed to enhance grip on rock and other slick surfaces * Terrain-Attack tread--massive tread blocks designed to deliver incredible grip from any approach * Linear Flex Zone--allows tire to flex and envelop objects in aired-down situations * Coregard Max Technology--derived from the Baja T/A KR3 tires, it helps prevent sidewall splitting and puncturing * Advanced Deflection Design--guards the upper shoulder area against snags or splits

4.82 out of 5 stars ( 11 )

$758.99

—

$878.99

Manufacturer Rebate

Nitrous Express SAFE Systems

Improve the performance of your nitrous oxide system with one of these Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems. They feature a one gallon, high-strength composite fuel cell that can be mounted in most factory battery trays without modification. The systems are also available with a high-output, internally mounted fuel pump and an adjustable external regulator, making installation quick and simple. When used with gasoline, they can support up to 800 nitrous horsepower. When used with methanol, they will support up to 400 nitrous horsepower. When used with race gas or methanol, the need to retard timing is significantly reduced. Often, on V8 engines using nitrous boosts of 150 hp and above, zero timing retard is required. The Nitrous Express SAFE (Stand Alone Fuel Enrichment) systems reduce the need to upgrade OEM fuel pumps and will completely eliminate pressure drop at the fuel rail in EFI vehicles. They also include an integrated fuel level gauge and all mounting hardware for a no-hassle installation.

4.0 out of 5 stars ( 8 )

$997.99

Manufacturer Rebate

Snow Performance Boost Cooler Stage-2.5 Water/Methanol Injection Systems

Snow Performance Boost Cooler Stage-2.5 water/methanol injection systems suppress detonation so that more power-producing timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un-surpassed reliability and ease of install. They're designed for use in naturally aspirated carbureted gasoline vehicles.

4.75 out of 5 stars ( 8 )

$909.99

—

$937.99

Manufacturer Rebate

LEED Brakes Rear Disc Brake Conversion Kits

LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.

4.52 out of 5 stars ( 21 )

$759.99

—

$999.99

Manufacturer Rebate

Flowmaster FlowFX Exhaust Systems

Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.

4.36 out of 5 stars ( 182 )

$766.95

—

$849.95

Manufacturer Rebate

Nitrous Express 3-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 3-bolt plate systems for GM LS-style engines feature a billet nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive on all LS car and truck intakes with a 3-bolt throttle body. Power levels can be adjusted between 50, 100, 150, 200, 250, 300 and 350 horsepower. Order the system preferred for your setup. Systems include: * Billet nitrous plate * Choice of 5 lb., 10 lb., 12 lb., or 15 lb. aluminum bottle * Stainless steel bottle brackets * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

4.0 out of 5 stars ( 7 )

$857.57

—

$945.99

Manufacturer Rebate

Nitrous Express Holley Hi-Ram Plenum Plate Conversion Kits

Nitrous Express Holley Hi-Ram plenum plate conversion kits bolt between the upper and lower intake manifold on Holley Hi-Ram manifolds for a quick and clean install. Nitrous and fuel are injected into each cylinder from the side of the runner, providing direct port-like distribution without having a flow-restricting nozzle or spray bar in the runner. High-tech Holley Hi-Ram plenum plate conversions are made from billet aluminum with passages machined directly into the plate, so there's no need to worry about spray bars breaking or spinning.

Not Yet Reviewed

$954.31

Manufacturer Rebate

Flowmaster Outlaw Series Exhaust Systems

Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.

4.57 out of 5 stars ( 276 )

$766.95

—

$849.95

Manufacturer Rebate

LEED Brakes Front Disc Brake Conversion Kits

LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.

4.32 out of 5 stars ( 78 )

$793.16

—

$999.99

Manufacturer Rebate

Snow Performance Stage 2.5 Forced Induction Progressive Water/Methanol Injection Kits

Snow Performance stage 2.5 forced induction progressive water/methanol injection kits provide increased performance with or without nitrous. Water methanol injection cools your incoming air charge and increases the total octane effect of pump gas. This allows you to run increased timing, which results in increased power and torque. When used with nitrous, the need for timing retard is greatly reduced or eliminated, and boosted applications especially benefit from reduced intake temperatures. The system includes everything needed for the installation. Order the model for your application.

4.33 out of 5 stars ( 3 )

$779.48

—

$937.99

Manufacturer Rebate

Flowmaster American Thunder Exhaust Systems

Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.

4.36 out of 5 stars ( 566 )

$949.95

Manufacturer Rebate

Nitrous Express Hitman Nitrous Systems

On a budget, but still looking for nitrous for your carbureted ride? Hitman nitrous systems from Nitrous Express can deliver the goods--from 100 to 200 hp, in 50-hp increments--at a price that will appeal to the budget-conscious. They're also great introductory systems if you're just getting into nitrous. On top of that, they feature the "Next Generation" Phase 3 distribution plate that delivers superior distribution and atomization of the fuel and nitrous. Plus, there are no spray bars to sag, split, or disturb airflow into the manifold. The kits include an optional nitrous bottle with a Pure-Flo valve, stainless steel mounting brackets, solenoids, a supply hose, fittings, a switch, and wiring.

4.33 out of 5 stars ( 3 )

$753.85

—

$818.88

Manufacturer Rebate

Nitrous Express Hitman Plus Nitrous Systems

If you're just getting into nitrous, or are on a budget, and you're looking for a powerful basic system that you can upgrade to higher performance later on, Nitrous Express has the answer. Their Hitman Plus systems can deliver from 50 to 200 hp, in 50 hp increments, right out of the box. However, you can upgrade them to 300 hp just by changing the nitrous solenoid and jetting, or you can jump up to full Stage 6 levels whenever you want. Kits include the nitrous distribution plate, bottle and mounting brackets, supply hose and fittings, switch, wiring, and solenoids.

Not Yet Reviewed

$774.43

—

$980.26

Manufacturer Rebate

Nitrous Express 4-Bolt Plate Nitrous Systems for GM LS Engine

Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation

4.0 out of 5 stars ( 3 )

$857.57

—

$957.57

Manufacturer Rebate

Mickey Thompson Baja Boss M/T Tires

Mickey Thompson Baja Boss M/T tires will help you dominate the trails! These 3-ply extreme mud tires layer aggressive, in-your-face styling with serious trail performance in an ultra-premium package. Features and benefits: * Soft-asymmetric tread pattern design reduces noise, improves handling and on-center feel, and reduces side-slip * Deep and wide voids enhance off-road traction and forward bite with a functional, aggressive appearance * Stone ejector ribs prevent stones being wedged into tread grooves, reduce stone retention, and help resist stone drilling * Angled shoulder scallops designed for ultimate traction and self-cleaning ability, they guide mud and loose soil out of the tread pattern with exposed trailing elements for larger biting edges * Mud scoops provide a concave surface for mud traction and help create a void to prevent mud from clinging to the elements * Silica-reinforced compound provides on-road tread wear, cut-and-chip resistance, and improved wet handling and braking performance * Deep embossed and chamfered black sidewall lettering

5.0 out of 5 stars ( 15 )

$784.49

—

$939.39

Manufacturer Rebate

Gen-Y The Boss Torsion Flex Adjustable Drop Hitches

Gen-Y The Boss Torsion Flex Drop adjustable hitches are built to accommodate extra-heavy towing loads—up to 32,000 lbs. with 3,500 lbs. tongue weight. They're available with 2 1/2 in. or 3 in. receivers and a choice of raise/drop options with adjustable positions. The Boss hitches work with the Gen-Y weight distribution system. The 2 1/2 in. hitches can be used with any standard 2 1/2 in. I.D. receiver; and the 3 in. versions are compatible with all 3 in. I.D. receivers, including late-model Ford Super Duty trucks and Reese Super Titan hitches. Offset model hitches are even more versatile. Now you can raise your hitch or lower it (raise/drop and adjustment positions vary by hitch), providing more options—especially for dual-purpose jobs using a tow bar and a luggage rack at the same time. The Boss offset hitches are also compatible with the Gen-Y weight distribution system. Additional product features: * Includes two hitch pins, Versa-Ball mount, and pintle lock * Fabricated with heavy-duty steel * Precision milled and drilled * Easy one-pin adjustment * Durable powdercoat finish * Patented * Exceeds SAE-J684 weight testing requirements NOTE: Never exceed the recommended capacity or tongue weight on any trailer tow coupling or vehicle receiver hitch.

5.0 out of 5 stars ( 2 )

$759.95

—

$922.95

Manufacturer Rebate

Snow Performance Boost Cooler Stage-3 2D Map Progressive Water/Methanol Injection Systems

Snow Performance boost cooler stage-3 2D map progressive water/methanol injection systems bring true 2D mapped water/methanol injection delivery to your direct fuel injected and forced induction vehicles. These create a 2D injection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water/methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. The stage 3 boost cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water/methanol controller, and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable stage 3 controller, -4 AN fittings, and, stainless steel braided line to mount pump/tank in the engine bay of your vehicle.

Not Yet Reviewed

$833.34

Manufacturer Rebate

Aldan American Road Comp Coilover Kits

Aldan American Road Comp coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.

4.2 out of 5 stars ( 50 )

$801.95

—

$964.99

Manufacturer Rebate

Aldan American Phantom Series Coilover Kits

Aldan American Phantom coilover kits assist you in drastically improving the handling and ride quality of your vehicle. Hand-built by master craftsmen in the USA, these direct-fit kits feature Phantom lightweight single-adjustable (either rebound or compression) shocks. They are CNC-machined from high-strength 6061 T-6 billet aluminum and wrapped with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. Phantom coilover kits ship fully assembled with springs compressed and anti-seize applied—plus, they're factory serviceable by Aldan for a lifetime of performance. Order the length and spring rate preferred for your application.

4.22 out of 5 stars ( 9 )

$765.95

—

$834.99

Manufacturer Rebate

Michelin Pilot Sport Cup 2 Tires

When you're developing a tire in association with Porsche, Ferrari, and other ultra-high performance sport car manufacturers, it has to be wicked. Michelin Pilot Sport Cup 2 tires are designed for road racing and tight-cornered summertime rides. Rigid elastomers in the inner tread, and Bi-Compound technology with its endurance compound, help reduce dry lap times, while a 20 percent deeper tread keeps you moving, even in light rain. Their inner strength and construction feature include Twaron cords, spirally wound around twin steel belts, for greater durability at high speeds and exquisite handling. Their asymmetrical tread pattern includes notched center ribs, Variable Contact Patch 3.0 for an enhanced footprint, and stiff elastomers for tight steering response. Stick corners like you're riding on rails with Michelin Pilot Sport Cup 2 tires.

Not Yet Reviewed

$768.99

Manufacturer Rebate

Snow Performance Boost Cooler Stage-2.5 Diesel Water/Methanol Injection Systems

Snow Performance boost cooler Stage-2.5 diesel water/methanol injection systems combine performance, quality, and easy installation specifically designed for your application. Increase your pump fuel octane by 25 points and make more power efficiently with a cooler running engine! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4 AN fittings offering surpassed reliability and ease of install. Features and benefits include: * Black hard anodized metal fittings * Industry leading 300 psi UHO pump for more pressure than the competition * 52mm boost gauge and adjustable progressive water-methanol controller all in one * New prime feature ensures water-methanol in lines with push of a button * 4 fault modes (clogged line/broken line/pump/solenoid) * Level switch upgrade * 2 proprietary hypersonic nozzles for the best atomization on the market

Not Yet Reviewed

$937.51

—

$937.99

Manufacturer Rebate

Flowmaster Stainless Steel Force II Exhaust Systems

These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.

4.4 out of 5 stars ( 77 )

$899.95

Manufacturer Rebate

Snow Performance POWER-MAX Systems

Want more power and lower EGTs from your diesel truck? These all-new Snow Performance POWER-MAX systems come equipped with the new boost-referenced VC-50 controller and have the ability to progressively command two Snow Performance Hyper-Sonic nozzles independently of one another. This sophisticated injection strategy yields dyno-proven horsepower increases and a 200 to 300 degree drop in EGTs! The VC-50 comes with a dual 7-color OLED screen, displaying boost, percentage of injection, low level, and two fault modes (clogged line/unplugged line). If you want the most advanced high-quality, water-methanol injection system tailored to your diesel truck, look no further than Snow Performance POWER-MAX systems.

3.67 out of 5 stars ( 3 )

$833.34

Parts and Accessories