Availability
Manufacturer Rebate
These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2-compatible with all fuel types * OBD-II scan tool reads/clears DTCs and logs up to 16 channels of CAN OBD-II data (cable not included) * Large, high-contrast graphics LCD * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial in and out * USB connection to your PC
( 6 )
$469.99
Manufacturer Rebate
AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used
Not Yet Reviewed
$363.99
Manufacturer Rebate
Dedenbear RPM2 switches feature push-button thumbwheels to let you select any shift point in 100 rpm increments, from 1,000 to 9,000 rpm. The switches sense rpm using MSD, Mallory, Crane, or any other standard ignition system. They have a 0.5-second delay feature that wires into the transbrake, or roll control to prevent false shifts due to tirespin, converter flash, or launch.
( 1 )
$339.99
Manufacturer Rebate
These Dedenbear reaction time delay boxes feature push-button thumbwheels with a range of 0.000-9.999 seconds, and full voltage through the boxes, with no voltage drops to the transbrake. They can also handle any transbrake up to 45 amps. They can be used with solid core wires and on any ignition system.
( 2 )
$349.99
Manufacturer Rebate
Choose which tree--yours or your opponent's--to launch off of with one of Dedenbear's Crossover delay boxes. Use the regular delay feature to launch against your own tree, or flip on the crossover when you want to leave off of your opponent's tree. You can even use one box to leave off of your tree's top bulb, and one to leave off of the bottom one. The boxes feature push-button thumbwheels (0.000-9.999) and a toggle switch to bypass the box completely. The cross over delay boxes can be used with any transbrake up to 45 amps, and on any ignition system. Want the Dedenbear advantage for a win? Just dial it in!
( 3 )
$444.99
Manufacturer Rebate
Innovate's TC-4 Plus devices are 4-channel thermocouple amplifiers for the MTS (Modular Tuning System). These data acquisition components may be used as stand-alone amplifiers for logging directly into LogWorks, or they can be used in conjunction with any other MTS-compliant device to retrieve key temperature metrics. Each of the four inputs of the TC-4 can be configured by the user for EGT range (32-1,999 degrees F; 0-1,093 degrees C) or CHT range (32-572 degrees F; 0-300 degrees C) to measure cylinder head temperatures. The TC-4 Plus can also be used to measure other temperature metrics, such as the turbo inlet and outlet, catalytic converter, transmission, and more. Using the TC-4's serial ports, you can daisy-chain other Innovate devices, such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4.
( 1 )
$460.99
Manufacturer Rebate
Keep your throttle stop in tip-top working order with Dedenbear throttle stop solenoids. They are available for all of Dedenbear's different types and styles of throttle stops. The solenoids feature heavy-duty construction to handle the heat of racing engines.
Not Yet Reviewed
$263.99
—
$265.99
Manufacturer Rebate
Dedenbear Thunder T1 delay boxes use a billet aluminum enclosure for maximum durability. Features include: * 250 percent larger display than previous design * Lighted keypad and display for night use * NHRA-approved for use in all electronic classes * Four different delay modes: Cross-Talk, Crossover, Interface, and Delay * Tap up/down to add or subtract delay with the push of a transbrake button * Input for remote dial-in board display * Independent line lock output * Adjustable transbrake with lockout protection * Crossover compensation and trip protection * Pro/Full feature allows saving of two separate groups of settings * 12 and 16 V compatible * Scroll and cursor keys for quick and easy settings * Compatible with all engines and ignition types
Not Yet Reviewed
$499.99
Manufacturer Rebate
Dedenbear time based shift timers can be used to activate air shifters, electric shifters, or even a single stage nitrous system. They use push-button thumb wheels for quick, easy settings from 0.00-9.99 seconds. They also feature quartz crystal timing, simple wiring diagrams for easy hookup, and 12 and 16 V compatibility.
( 1 )
$305.99
Manufacturer Rebate
Dedenbear throttle stop controller second stage kits have been specifically designed for high-horsepower drag race cars that have significant tire spin problems right off of the starting line. They allow adjustable intermediate opening positions to help eliminate your traction problem. The kits include a second control valve, an air line kit with a T-fitting, and a solenoid to active the CO2 air.
Not Yet Reviewed
$335.99
Manufacturer Rebate
These Stack ST700 wiring harnesses are designed for use with your ST700 Race Dash system. They allow for the addition of pressure and temperature sensors.
Not Yet Reviewed
$291.99
Manufacturer Rebate
Stack Gauges speed sensors are small, lightweight, and accurate. Designed for your integrated Stack Race Dash system, their wheel speed sensors help you to obtain speed readout by simply plugging them into the dash harness. Your speedometer can be configured for different tire sizes and to display speed in either mph or km/h. Add a performance option to your dash system--add Stack Gauges speed sensors.
Not Yet Reviewed
$275.99
Manufacturer Rebate
Stack extender harness kits provide five of the most utilized cables when installing Stack data systems and displays on a variety of applications. These kits are perfect accessories to purchase alongside your new Stack system or as spares to have on hand. Each harness is terminated with Mini Sure Seal (MSS) connectors offering vibration-resistant, waterproof performance. Each kit contains: * Two 2.3 ft. (0.7m) length cables * Two 4.6 ft. (1.4m) length cables * One 6.8 ft. (2.1m) length cable
Not Yet Reviewed
$256.99
Manufacturer Rebate
Stack Professional linear potentiometers are engineered to excel in the most demanding conditions in motorsports, offering excellent repeatability, reliability, linearity, and extended environmental performance. Featuring IP67 sealing, equipped with self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, throttle position, aerodynamic surface deflection, and actuator travel. Select the stroke length needed for your setup.
Not Yet Reviewed
$433.99
—
$518.99
Manufacturer Rebate
Stack Clubman linear potentiometers provide excellent value for motorsport monitoring and measurement tasks offering sound repeatability, reliability, linearity, and environmental performance. Featuring anodized aluminum housings, IP65 sealing, self-aligning spherical bearings, and available in stroke lengths from 2 to 8 in. (50 to 200mm), these position sensors are pre-terminated for use with Stack data systems monitoring parameters, such as damper (shock) position, pedal inputs, steering angle, aerodynamic surface deflection, and actuator travel.
Not Yet Reviewed
$341.99
—
$398.99
Manufacturer Rebate
Dedenbear offers linkage throttle stops for virtually any application and budget. They come with a needle valve adjuster to control the opening rate, quick disconnect fittings, a stainless steel solenoid and cylinder, and high-temperature seals. All steel parts are plated to protect against corrosion. All linkage throttle stops are available with Dedenbear's CO2 bottle kits.
Not Yet Reviewed
$323.99
—
$377.99
Manufacturer Rebate
Expand the capacity of your Stack Pro LCD Motorsport Display Logger by an additional four channels with the Stack expansion wiring harness. Record and display even more of the vital engine and chassis data you need to stay ahead of the competition.
Not Yet Reviewed
$303.99
Manufacturer Rebate
Stack Gauges wheel speed pulse amplifiers will convert the output of your existing gearbox sensor. Gain the right information for the safe performance of your vehicle when you utilize Stack ST492 pulse amplifiers in conjunction with Stack display systems.
Not Yet Reviewed
$279.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
