Availability
Manufacturer Rebate
Aeromotive A2000 drag race fuel pumps deliver 350 gph of fuel at free flow—enough for engines between 500 and 2,000 hp. They use a diaphragm-controlled regulator for even, reliable flow without sudden pressure spikes. The results are more consistent ETs and better overall performance. Compatible with gasoline and alcohol, the pumps feature a diaphragm bypass, -10 AN inlet and outlet ports, a -8 AN return port, a 1/8 in. NPT gauge port, and a proprietary shaft seal design.
( 8 )
$549.78
Manufacturer Rebate
Aeromotive Pro-Series 10.0 gpm brushless gear pumps are engineered from the ground up for winning performance. In fact, they're the single highest-flowing electric fuel pumps on the market. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 10.0 gpm at 90 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low-amp draw, excellent heat dissipation, and high-pressure capabilities. Lots of power needs lots of fuel; Aeromotive 10.0 gpm brushless gear pumps will feed your hungry high performance machine.
( 1 )
$1,970.99
Manufacturer Rebate
Aeromotive Pro-Series 5.0 gpm brushless gear pumps are engineered from the ground up for winning performance. In fact, they're the single highest-flowing electric fuel pumps on the market. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 5.0 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low-amp draw, excellent heat dissipation, and high-pressure capabilities. Lots of power needs lots of fuel; Aeromotive 5.0 gpm brushless gear pumps will feed your hungry high performance machine.
( 1 )
$1,762.80
Manufacturer Rebate
Aeromotive 5.0 gpm brushless variable speed gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 5.0 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low amp draw, excellent heat dissipation, and high-pressure capabilities. The units are True Variable Speed (TVS) controlled, offering the advantage of pump speed control via a 0-5 V analog DC input signal. The Pro-Series TVS controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. Lots of power needs lots of fuel; Aeromotive 5.0 gpm TVS brushless gear pumps will feed your hungry high performance machine. Order the body style preferred for your application.
( 3 )
$1,884.85
Manufacturer Rebate
Ideal for daily drivers, street rods, boats, and bracket cars, Aeromotive street/strip fuel pumps will deliver the durability and reliability you expect without breaking the bank. They're available in different inlet/outlet sizes and attachment styles. Features include: * 900 lbs./hr. of fuel flow at 13.5 V * Highly durable pumping mechanism guaranteed to never wear out * 3/8 in. ports * Alcohol compatibility * Low amperage draw
( 60 )
$379.30
Manufacturer Rebate
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 65 )
$624.90
—
$1,134.72
Manufacturer Rebate
Aeromotive 3.5 gpm brushless variable speed gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 3.5 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low amp draw, excellent heat dissipation, and high-pressure capabilities. The units are True Variable Speed (TVS) controlled, offering the advantage of pump speed control via a 0-5 V analog DC input signal. The Pro-Series TVS controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. Lots of power needs lots of fuel; Aeromotive 3.5 gpm TVS brushless gear pumps will feed your hungry high performance machine. Order the body style preferred for your application.
Not Yet Reviewed
$1,695.45
Manufacturer Rebate
Aeromotive 7.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum fwhp by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 4,800 fwhp on gas--naturally aspirated -- Up to 3,400 fwhp on gas--forced air induction -- Up to 3,360 fwhp on E85--naturally aspirated -- Up to 2,380 fwhp on E85--forced air induction -- Up to 1,680 fwhp on methanol--naturally aspirated -- Up to 1,190 fwhp on methanol--forced air induction * Carbureted -- Up to 5,400 fwhp on gas--naturally aspirated -- Up to 3,800 fwhp on gas--forced air induction -- Up to 3,780 fwhp on E85--naturally aspirated -- Up to 2,400 fwhp on E85--forced air induction -- Up to 1,890 fwhp on methanol--naturally aspirated -- Up to 1,200 fwhp on methanol--forced air induction
( 1 )
$2,152.75
—
$2,442.40
Manufacturer Rebate
Aeromotive 5.0 GPM brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 5.0 GPM in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,755.64
—
$2,229.15
Manufacturer Rebate
Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 90 psi with Signature models), featuring a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Includes two stainless steel T-bolt clamps (12703) for mounting * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 HP
( 1 )
$826.50
—
$859.90
Manufacturer Rebate
Aeromotive A3000 drag race fuel pump assemblies will feed your craving for extreme horsepower. Available with or without the 100-micron fuel filter, your assembly will include the efficient, high-flowing A3000 carbureted fuel pump and integrated true diaphragm-controlled bypass regulator. All the components offer the ability to be independently indexed for a custom installation and maximum performance gains. With features like less weight, more flow at pressure, modular design and options for mounting, these great-looking Aeromotive A3000 drag race fuel pump assemblies fully satisfy.
( 3 )
$863.50
Manufacturer Rebate
Innovate SCG-1 boost controllers integrate the industry-leading DirectDigital wideband air/fuel ratio technology. The company paired its advanced oxygen sensor control technology with its all-new proprietary solenoid control that provides superior boost control accuracy, response, and safety. A user-programmable shift light was added, with the entire package housed in a compact gauge body for ease of installation and use. As with all of Innovate's air/fuel ratio products, the SCG-1 boost controllers utilize only 100 percent digital wideband air/fuel ratio technology to provide real-time feedback to the SCG-1. This air/fuel information is displayed on an integrated OLED display, along with manifold pressure and wastegate duty status. The air/fuel ratio information is also used to provide a user-definable boost cut that enhances the safety margin over most competitors' offerings which rely only on overboost threshold. Innovate SCG-1 boost controllers have a full-programmable analog output, ideal for applications using standalone ECUs, piggyback ECUs, or external data loggers.
( 3 )
$440.99
Manufacturer Rebate
Aeromotive 10.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum FWHP by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 6,900 fwhp on gas--naturally aspirated -- Up to 4,900 fwhp on gas--forced air induction -- Up to 4,830 fwhp on E85--naturally aspirated -- Up to 3,430 fwhp on E85--forced air induction -- Up to 2,415 fwhp on methanol--naturally aspirated -- Up to 1,715 fwhp on methanol--forced air induction * Carbureted -- Up to 7,600 fwhp on gas--naturally aspirated -- Up to 5,500 fwhp on gas--forced air induction -- Up to 5,300 fwhp on E85--naturally aspirated -- Up to 3,850 fwhp on E85--forced air induction -- Up to 2,650 fwhp on methanol--naturally aspirated -- Up to 1,925 fwhp on methanol--forced air induction
Not Yet Reviewed
$2,255.13
—
$2,732.60
Manufacturer Rebate
Aeromotive brushless Stealth fuel pumps provide the Pro-Series fuel pump performance the world has come to trust and depend on—now available with the latest spur-gear pumping mechanism and brushless-motor technology. These brushless spur-gear pumps are able to move more fuel and sustain higher pressures without failure. They provide a direct-fit on all Aeromotive Stealth 6, 15, and 20-gallon fuel cell tanks; and the pumps are submersible for custom, in-tank placement in 10 in. deep fuel tanks or fuel cells. For use in EFI or carburetor applications with correct regulator.
Not Yet Reviewed
$1,483.25
—
$2,575.45
Manufacturer Rebate
Aeromotive A1000 brushless variable speed fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery—with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps feature a bedrock solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise and more reliability. With a higher level of efficiency, down to fractions of a second in design speed control, Aeromotive A1000 brushless variable speed fuel pumps afford precise control via a 0-5 V analog DC input signal—better maintaining pump rpm and flow, producing a flatter flow curve. Tight tolerances result in less current draw, less heat, and extended life. Order the body style preferred for your application. Features and specs include: * ORB-10 inlet and outlet ports * Fully submersible for custom, in-tank placement * Fuel Injected engines: -- up to 1300 FWHP – naturally aspirated -- up to 1000 FWHP – forced air induction * Carbureted engines: -- up to 1500 FWHP – naturally aspirated -- up to 1200 FWHP – forced air induction
( 1 )
$959.65
—
$1,015.90
Manufacturer Rebate
Aeromotive Pro-Series 3.5 gpm brushless gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 3.5 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals—while offering low-amp draw, excellent heat dissipation, and high-pressure capabilities. Lots of power needs lots of fuel; Aeromotive 3.5 gpm brushless gear pumps will feed your hungry high performance machine. Choose the body style you prefer.
Not Yet Reviewed
$1,573.45
Manufacturer Rebate
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$1,082.70
—
$1,338.40
Manufacturer Rebate
Aeromotive A1000 brushless Stealth 2.0 gpm fuel pumps feature the latest brushless-motor technology for light weight, cooler fuel, and enhanced reliability. Each pump utilizes Aeromotive's bedrock solid roller vane design, which primes easily and reduces friction. A1000 Stealth pumps are designed as a direct drop-in replacement for any of the Stealth fuel cells, including COPO, Cobra Jet, or Drag Pak racecars. They're submersible for custom, in-tank placement, and are a great option when building a 10 in. deep custom fuel cell. These fuel pumps are for use in EFI or carburetor applications with correct regulator.
Not Yet Reviewed
$1,177.44
Manufacturer Rebate
Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,863.60
—
$2,058.30
Manufacturer Rebate
Aeromotive continuous-duty Eliminator brushless variable speed fuel pumps support big horsepower and maintain the driveability necessary for a true high performance street car. Designed for high-horsepower street/strip applications, EFI or carbureted, they feature a "dual chamber" pumping mechanism. Their True Variable Speed Controller (TVS) offers the advantage of pump speed control via a 0 to 5 V analog DC input signal. Capitalizing on Aeromotive brushless technology, the pumps reduce fuel flow during low demand, decrease an already low current draw and, therefore, minimize the introduction of heat even further. Order the body style preferred for your application. Additional features include: * -12 AN O-ring boss inlet port and -10 AN O-ring boss outlet port * Fully submersible for custom in-tank pump placement * 25 percent more flow at pressure than Aeromotive A1000 fuel pump * Supports naturally aspirated EFI engines up to 1,900 hp * Supports forced air induction EFI engines up to 1,400 hp * Supports naturally aspirated carbureted engines up to 2,300 hp * Supports forced air induction carbureted engines up to 1,700 hp
Not Yet Reviewed
$1,249.30
Manufacturer Rebate
Aeromotive offers various brushless 5.0 gpm gear pump fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 2 )
$2,091.95
—
$3,100.75
Manufacturer Rebate
Aeromotive Eliminator brushless fuel pumps are built for up to 65 psi of sustained pressure, featuring their bedrock solid, dual chamber roller vane design that primes easily, reduces friction, and improves efficiency. Brushless motors produce more torque capacity and efficiency, while delivering lower noise and higher reliability. The Eliminators provide 25 percent more flow at pressure than their A1000 models. Get the performance you expect and want with an Aeromotive Eliminator brushless fuel pump. Features also include: * Lighter than the traditional Eliminator pump * Reduced current draw at higher EFI pressures * Extended service life in methanol and ethanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Fully submersible for custom, in-tank placement * Perfect for "blow-through" carbureted engines up to 1,700 FWHP
Not Yet Reviewed
$940.75
—
$1,444.50
Manufacturer Rebate
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,425.09
—
$1,617.45
Manufacturer Rebate
Aeromotive brushless Eliminator Stealth fuel pumps are built for up to 65 psi of sustained pressure. They feature a bedrock solid, dual chamber roller vane design that primes easily, reduces friction and improves efficiency. Sensors monitor rotor angle providing more reliable, faster shifting, and a flatter flow curve for better consistency. This produces more torque capacity and better motor efficiency with less noise and higher reliability. The tight tolerances on these pumps result in less current draw, lower heat, and extended life. These submersible in-tank pumps feature a universal filter pickup, for an overall height adjustment from 10 to 16 inches. The competition won't have time to react, when you sneak up on them running Aeromotive brushless Eliminator Stealth fuel pumps! Features, items, and specs: * ORB-10 outlet port * Integral 100 micron pre-filter and fluted pickup * Integral external brushless controller for clean installation, cooler fuel, and enhanced reliability * Compatible for EFI or carbureted applications * Perfect for "blow-through" carbureted engines up to 1,700 FWHP * Up to 2,300 FWHP for naturally aspirated carbureted engines * Up to 1,400 FWHP for forced air induction fuel injected engines * Up to 1,900 FWHP for naturally aspired fuel injected engines * EFI rated flow of 1,000 lbs.-hr. at 45 psi, 13.5 volts * Carb rated flow of 1,300 lbs.-hr. at 9 psi, 13.5 volts * E85 compatible (reduce max FWHP by 30 percent) * Lighter than traditional Eliminator pumps * Extended service life in methanol and ethanol * Requires straight 12 V to 16 V DC power supply * Also available in an external in-line pump and installed in a Stealth fuel cell * Not compatible with pulse modulated systems or fuel pump speed controllers
Not Yet Reviewed
$1,405.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
