Availability
Showing In Stock Items. Show All 115 Items.
Instant Rebate
TeraFlex Alpine IR control arms offer widespread alignment adjustability for all-out performance on your JL/JLU Wrangler. They include advanced independent rotation bushings, make use of factory brackets, and can be added to an existing suspension lift. Reach for your Jeep's maximum potential with TeraFlex Alpine IR control arms. Features and benefits: * Available as full or partial kits (front upper or lower; rear upper or lower) * Durable drawn-over-mandrel tube (42mm diameter x 4mm wall) provides maximum strength * Optimizes caster angle and tunes anti-squat geometry for proper suspension alignment * Re-centers axles in the wheel well for proper suspension movement and/or increased wheelbase * Full range of movement—will not restrict articulation or off-road flex * IR (Independent Rotation) bushings are maintenance-free and provide unrestricted rotation and flex—plus outstanding NVH damping to improve ride quality * Zero-maintenance, forged, threaded joints for smooth and quiet flex * Premium black e-dipped coating provides superb durability and resists corrosion * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length is set * TeraFlex Lifetime Warranty against defects
( 1 )
$1,943.99
—
$2,345.38
Instant Rebate
TeraFlex front adjustable track bars locate the axle side-to-side in the vehicle. They're designed to raise and lower with the suspension movement in an arc that matches the arc of the drag link. These track bars can be adjusted to achieve that optimum angle to maximize suspension travel and efficiency. They'll also eliminate bump steer problems without the need of drilling any holes. When you're ready to lift your vehicle, TeraFlex front adjustable track bars will eliminate any steering or suspension travel issues that may occur. Order the model recommended for your Jeep application.
( 7 )
$320.39
—
$333.89
Instant Rebate
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$395.99
Instant Rebate
TeraFlex Jeep JT Gladiator 1.5 in. spacer leveling kits allow you to run a larger tire with added clearance on the trail, and maintain family-friendly versatility. Not only do these kits clear larger tires, but the additional height helps compensate for heavier aftermarket bumpers and winch, a larger spare tire, or weekend gear. They also work with stock-length shock absorbers (not included). Satisfy your primal need to go big, while wisely keeping your Jeep's everyday functionality with a TeraFlex Jeep JT Gladiator 1.5 in. spacer leveling kit. Features, items, and specs: * 33 in. maximum tire diameter with stock wheel backspacing for Sport/Overland fenders * 35 in. maximum tire diameter with stock wheel backspacing for Rubicon fenders * 1 in. and 0.5 in. lift front coil spring spacers included * 1 in. front bump stop strike pad extensions * All necessary hardware * Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35 in. or larger tires * Wheels with less than stock backspacing require at least 0.5 in. rear bump stop strike pad extensions (not included) to avoid tire rubbing on inner fender liner at full compression when articulated
( 6 )
$115.19
Instant Rebate
TeraFlex quick-disconnect sway bar end links are designed to allow your vehicle to maximize the amount of suspension travel. They feature a removable center section and built-in lanyards for sway bar retention. The end links are made from high-grade steel and are powdercoated to ensure protection from harsh elements.
( 5 )
$155.98
Instant Rebate
TeraFlex Jeep KL Cherokee 2 in. Performance Spacer Lift Kits are the most economical way to raise your unibody Jeep SUV with the fewest modifications. They deliver the maximum amount of lift without causing premature IFS (independent front suspension) failure. These lift kits provide the perfect amount of clearance to fit larger tires for backcountry exploration without compromising factory handling and suspension control for a balanced highway ride—making them perfect for daily drivers and weekend travelers!
( 3 )
$188.09
Instant Rebate
Would you like to improve the stance of your Wrangler? If the answer is yes, then TeraFlex Jeep JK Wrangler 1.5 in. leveling kits are just what you need! They are perfect for leveling your JK--and adding just a touch of lift to compensate for aftermarket bumpers or a full-size spare. All necessary hardware is included to do the job.
( 20 )
$210.59
Instant Rebate
TeraFlex Jeep JK Wrangler spring spacers level out your JK if it's dipping in the front from winch weight, or just needs to be leveled out due a heavy load. They are designed to work in stock configurations or with a lifted vehicle and are available in various sizes for the front or rear to fill your application needs.
( 19 )
$22.99
—
$40.99
Instant Rebate
TeraFlex sway bar end links are designed to reduce clearance issues between the tire and rear sway bar. The upper links utilize a sealed narrow shoulder tie rod-type ball socket for maximum tire clearance. The sway bar links are constructed within OEM-quality standards to provide long-term durability. TeraFlex sway bar end links are offered for the front and rear of your Jeep. Note: These links will not work with the rear S/T trail sway bar system.
( 1 )
$73.79
Instant Rebate
TeraFlex Jeep JL/JT load leveling spacers provide additional suspension height to help compensate for heavier aftermarket gear, such as bumpers, a winch, a larger spare tire, or weekend swag. The spacers are available for front or rear, or in a kit with both front and rear. TeraFlex Jeep JL/JT load leveling spacers work with original or stock-length aftermarket shock absorbers, like their Falcon shocks.
( 3 )
$46.79
Instant Rebate
TeraFlex Jeep JL Wrangler 1.5 in. performance spacer lift kits allow you to run larger tires with added clearance on the trail, all while maintaining family-friendly versatility. Not only does the additional height clear larger tires, but it will help compensate for heavier aftermarket gear such as bumpers, a larger spare tire, or weekend swag. The suspension spacers will also (depending on 2-door or 4-door model) correct the factory rake, giving your vehicle some attitude with a more aggressive stance. When reality demands that you keep your Jeep family-friendly, TeraFlex will satisfy your primal need to go big with their performance spacer lift kits. Features include: * Front and rear spring spacer with all necessary hardware * 2-door kit has shorter front spacers—shorter spacers in the front will correct the factory tail-down rake * 4-door kit has taller front spacers—taller spacers in the front will correct the factory nose-down rake
( 1 )
$185.39
Instant Rebate
Increase your shock options with TeraFlex shock bar pin eliminator kits. Their front lower and rear upper kits eliminate the need for bar pins. Even better, you'll have no worries about broken bar pins, plus no more rattling! You simply install them in place of your bar pins with the included hardware. Enjoy a quieter ride with TeraFlex shock bar pin eliminator kits.
( 7 )
$33.29
Instant Rebate
TeraFlex Jeep JL Wrangler Alpine long control arms offer complete alignment adjustability for all-out performance. They include advanced independent rotation bushings, make use of factory brackets, and can be added to an existing suspension lift. Reach for your Jeep's maximum potential with TeraFlex Jeep JL Alpine long control arms. (Available with or without Alpine long arm brackets; please specify when placing your order.) Features and benefits include: * Available as full or partial kits (front upper or lower; rear upper or lower) * Durable drawn-over-mandrel tube (42mm diameter x 4mm wall) provides maximum strength * Optimizes caster angle and tunes anti-squat geometry for proper suspension alignment * Re-centers axles in the wheel well for proper suspension movement and/or increased wheelbase * Full range of movement—will not restrict articulation or off-road flex * Bushings are maintenance-free and provide unrestricted rotation and flex—plus outstanding NVH damping to improve ride quality * Zero-maintenance, forged, threaded joints for smooth and quiet flex * Premium black E-dipped coating provides superb durability and resists corrosion * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length is set * Alpine long arm brackets (select kits only) reposition frame-end control arm mounting points to restore near factory orientation, which reduces bushing stress during droop and shock load transferred through control arms * TeraFlex Lifetime Warranty against defects
Not Yet Reviewed
$1,886.38
—
$2,987.97
Instant Rebate
TeraFlex Sport FlexArms offer a full range of movement for off-road performance. These fixed-length arms provide maintenance-free performance for lifted rigs. They will correct caster and pinion angles while delivering unrestricted articulation off-road. Sport FlexArms are built with hefty DOM tubing and high-quality factory bushings that will handle trail abuse and provide excellent vibration-damping ride quality characteristics with zero maintenance. They are finished with a premium e-dipped coating for superior durability and corrosion resistance. Choose arms for the street and trail--TeraFlex Sport FlexArms.
( 2 )
$230.39
Instant Rebate
TeraFlex track bar axle brackets are offered in several styles to fine-tune your Jeep's suspension. Available for front and rear applications, the brackets are constructed from heavy-duty steel, then accurately cut, bent, and pre-drilled to ensure proper positioning on your vehicle. The tough black powdercoat finish ensures durability. TeraFlex front models help correct steering geometry to eliminate bump steer and other front-end issues. The rear models can correct roll center, restore factory handling, and/or reduce body roll on lifted vehicles.
Not Yet Reviewed
$115.19
—
$126.89
Instant Rebate
TeraFlex SpeedBumps are an innovative composite hydraulic bump stop system designed for high-speed performance. The maintenance-free, performance-tuned microcellular polyurethane technology provides a simple installation with no further adjustment or tuning required. Order the recommended pair or full set of four for your vehicle. Features include: * Simple installation with no welding required * Quiet operation * Absorbs impact energy progressively to prevent bent axle tubes * Maintenance-free * Compatible with suspension systems that retain factory axle and spring mounting locations * High compression rate with full memory rebound * Low temperature flexibility reduces fatigue and premature failure in subzero conditions
Not Yet Reviewed
$892.79
Instant Rebate
TeraFlex coil springs will outperform your stock springs. Unlike stock springs, they are designed with the addition of aftermarket components in mind. After all, what Jeep owner doesn't add winches, bumpers, and larger tires to their rigs to make them more invincible? Choose coil springs made with you and your Jeep in mind--TeraFlex coil springs.
( 3 )
$243.89
Instant Rebate
TeraFlex introduces a new benchmark in suspension design with their Falcon Sport Toyota Tacoma shock absorber systems! Developed to fit models with up to a 2 in. lift kit, these systems are engineered to deliver increased stability and control, as well as improved ride quality and comfort—both on and off-road! Key features and benefits of Falcon Sport shock absorber systems include: * Designed for a wide array of Toyota Tacoma vehicles equipped with 2 in. lift kit * Ideal choice for daily driven vehicles * Optimized fitment for clearance during full suspension travel * Zone Rate Tuning (ZRT) re-tunes factory spring in extension, drive, and compression zones for various driving conditions * Internal negative spring inside shock body eliminates top-out clunk, softens tire landing, and reduces body roll and stress on shock * Factory spring rate unaffected in drive zone for comfortable, controlled ride * Progressive microcellular bump stop provided effectively re-tunes spring rate (while in compression zone) * Volume Optimized Damping (VOD): digressive linear valve produces quicker ramp-up for increased damping volume, delivering better vehicle feedback and control during low-speed driving * VOD improves shock absorbers' ability to reduce bottoming out at full compression during faster speeds or over uneven terrain Components in kit: * Front leveling monotube shock absorbers with fixed-rate damping optimized for on- and off-road driving * Progressive microcellular bump stops (both front and rear) * Billet coil spring carrier * Injection-molded spring isolator * Rear long-travel piggyback shock absorbers * Lift leaf spring blocks * Bump stops (application specific) * Roost guards * Installation hardware
Not Yet Reviewed
$1,593.89
Instant Rebate
TeraFlex Jeep JL Wrangler Falcon SP2 Series 3.1 Piggyback shocks deliver increased stability, improved ride quality, and comfort on-road, while the increased compression damping provides more aggressive off-road handling. The 3.1 Piggybacks feature a simplified adjustable shock with an 8-position micro tool-adjustable dial to fine-tune damping for specific terrain and handling. The eight positions will customize compression damping from soft to firm. Built from the ground up, with a focus on fitment and function, these fix-rate shocks have been optimized for on- and off-road. Order the Jeep-specific shock designed to fit your application. Shock features, specs and benefits include: * Vehicle-specific shock absorbers * 6061-T6 aluminum alloy shock body resists wear and protects internal components while providing superior heat dissipation * Smooth-honed internal shock body surface for long-term performance * Induction hardened chrome-plated shaft resists rock damage and corrosion, as well as prevents shaft buckling * JL/JLU corner-specific shock absorber * Front lower offset eyelet design provides maximum shock body-to-frame clearance during articulation * Rear roost guards prevent shock shaft damage from rocks kicked up by the tires * Maximum shaft diameter allows for more precise tuning * Hard anodized billet piston * One-piece PTFE bronze piston wear band with O-ring * Digressive linear piston and base valve technology * Volume Optimized Damping (VOD) for quicker ramp-up and increased damping volume * Inline OGS (Oil/Gas Separator) prevents cavitation * Red Line full synthetic shock oil with high viscosity index of 519 for consistent performance across all temperatures and reduced shock fade * Synthetic formula also contains special anti-wear and lubricity agents for excellent thermal stability * Race-inspired performance for increased vehicle stability * Improved dynamic roll control and low-speed damping * Dramatic improvement in on-road comfort and off-road performance * Optimized fitment for clearance during full suspension travel and articulation * Shock body provides optimal performance * 1,000-hour salt spray corrosion resistance test on all hardware * Serviceable and rebuildable (factory serviced) * Designed, engineered, and assembled in-house from domestic and globally sourced components * Patent pending design * 3-year warranty Important Note: Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders (see instructions for proper configuration for your application). May require 2 in. bump stop strike pad extension kit and/or 0.5 in. bump stop strike pad shim kit(s).
Not Yet Reviewed
$1,452.59
Instant Rebate
If you have an ARB air compressor for your Jeep Wrangler JK and are looking to mount it in a unique way, then one of these TeraFlex ARB air compressor under hood mount kits is just what you need. Designed specifically to mount a small ARB air compressor on the left hand side of your engine, these mounting kits will offer maximum protection for your air compressor from damage and environmental elements. The air compressor mount kits are designed using strong and durable materials including steel, along with laser-cut and bent brackets. Additionally, you will find the air compressor mount brackets have a quality, long-lasting powdercoat finish.
Not Yet Reviewed
$89.09
Instant Rebate
TeraFlex designed and developed these exceptional VSS shock absorbers specifically for Jeep vehicles, giving you extreme off-road performance and an unequaled highway ride. They feature premium-quality rubber bushings with Jeep-specific bar pins and a resistant black finish that withstands the most extreme off-road abuse. The VSS gas shocks use a twin-tube design, and a special shock boot protects the triple-chromed rod to ensure extended, trouble-free operation.
( 1 )
$83.69
—
$92.69
Instant Rebate
TeraFlex Alpine long arm bracket kits are CAD-designed for maximum strength. TeraFlex streamlined the frame-end mounting points, incorporating both upper and lower mounts in each bracket, thus simplifying installation while maintaining a factory appearance. Features and kit contents: * Brackets reposition frame-end control arm mounting points to restore near factory orientation, which reduces bushing stress during droop and shock load transferred through control arms * Premium black E-dipped coating provides superior durability and corrosion resistance * Front brackets * Rear brackets * Crossmember (JL) or rear gussets (JK) * All necessary hardware
Not Yet Reviewed
$1,101.59
Instant Rebate
TeraFlex Falcon Sport leveling systems are available for daily drivers and tow/haul packages. The first delivers increased stability and control, as well as improved ride quality and comfort both on and off-road. The second features adjustable piggyback rear shocks that allow you to select from three settings for towing and hauling capabilities. Both Falcon Sport leveling systems have shocks engineered with Zone Rate Tuning (ZRT) and Volume Optimized Damping (VOD). Order the kit recommended for your vehicle. TeraFlex Falcon Sport systems include: Front components: * Leveling monotube shock absorbers with fixed rate damping optimized for on and off-road driving * Progressive microcellular "foam" bump stops * Billet coil spring carrier * Injection molded squeak-free spring isolator * All necessary hardware Rear components: * Piggyback shock absorbers with fixed rate damping optimized for on and off-road driving * Tow/Hauling system has adjustable piggyback shocks with fast adjust knob with three compression settings for large damping adjustments--comfort and control, moderate tow/haul, and heavy tow/haul * Progressive microcellular "foam" bump stops * Bump stop cups * Roost guards * All necessary hardware All Falcon shocks feature: * Optimized fitment for clearance during full suspension travel * 2.25 in. shock body provides optimal performance * 6061-T6 aluminum alloy shock body resists wear and protects internal components, while providing superior heat dissipation * Smooth honed internal shock body surface for long-term performance * 3/4 in. induction hardened chrome plated shaft resists rock damage and corrosion, as well as prevents shaft buckling * Maximum shaft diameter allows for more precise tuning * Hard anodized billet piston * One-piece PTFE bronze piston wear band with O-ring * Inline OGS (Oil/Gas Separator) prevents cavitation * Red Line full synthetic shock oil with high viscosity index of 519 for consistent performance across all temperatures and reduced shock fade * 1,000 hour salt spray corrosion resistance test on all hardware * Serviceable and rebuildable (factory serviced) * 3-year warranty
Not Yet Reviewed
$2,342.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
