Availability
Instant Rebate
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$98.09
—
$305.09
Instant Rebate
TeraFlex HD tie rod and drag link kits are built for punishment. Extreme conditions that normally would cause your factory steering components to bend and fail are where these kits will survive. They are designed and engineered to be strong and durable to take you through the terrain, over the rocks, and back home. Outfit your rig with TeraFlex HD tie rod and drag link kits. TeraFlex kits feature: * HD tie rod is 1.6 in. O.D. 4140 heat-treated chromoly * Forged tie rod end housing designed * Allows proper clearance for use with factory 17 in. wheels * Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromoly ball/stud and 1045 carbon steel housing * Adjustable preload tension to ensure proper long-term durability * Includes the clamp or the TeraFlex steering stabilizer relocation kit * The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the tie rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. * 1.25 in. O.D. fully forged drag link eliminates excess movement during hard steering maneuvers * Oversized DOM factory-style adjusting collar and pinch clamp for simple adjustments
( 3 )
$963.89
Instant Rebate
TeraFlex JK Wrangler Rzeppa high-angle factory replacement CV joints replace your worn or damaged factory units without needing to purchase expensive aftermarket U-joint upgrades. These high-angle models reduce boot failure common with 3 in. or higher lifts. TeraFlex includes low-friction grease engineered specifically for the high-rpm needs of the Rzeppa CV joint and features high-viscosity surface bonding characteristics necessary to properly adhere the grease to all moving surfaces. TeraFlex Rzeppa high-angle CV joint kits include: * CV joint assembly * High-angle CV housing cap and boot * Bolt flanges * Socket head bolts * 6mm Allen wrench * Low-friction CV grease
( 15 )
$183.59
Instant Rebate
TeraFlex Alpine IR control arms offer widespread alignment adjustability for all-out performance on your JL/JLU Wrangler. They include advanced independent rotation bushings, make use of factory brackets, and can be added to an existing suspension lift. Reach for your Jeep's maximum potential with TeraFlex Alpine IR control arms. Features and benefits: * Available as full or partial kits (front upper or lower; rear upper or lower) * Durable drawn-over-mandrel tube (42mm diameter x 4mm wall) provides maximum strength * Optimizes caster angle and tunes anti-squat geometry for proper suspension alignment * Re-centers axles in the wheel well for proper suspension movement and/or increased wheelbase * Full range of movement—will not restrict articulation or off-road flex * IR (Independent Rotation) bushings are maintenance-free and provide unrestricted rotation and flex—plus outstanding NVH damping to improve ride quality * Zero-maintenance, forged, threaded joints for smooth and quiet flex * Premium black e-dipped coating provides superb durability and resists corrosion * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length is set * TeraFlex Lifetime Warranty against defects
( 1 )
$1,943.99
—
$2,345.38
Instant Rebate
TeraFlex Alpha HD adjustable spare tire mounts will secure your Jeep's full-size spare while exploring the most extreme trails and rugged terrain. These brackets affix to the factory tailgate and also include a third brake light mount and rear view camera mount. The tire mounts include vertical, as well as fore and aft, adjustments. The heavily gusseted mounts are formed and welded from CNC laser-cut steel for superior strength, while the adjustable tire carrier is constructed from strong, lightweight 6061-T6 extruded aluminum. TeraFlex Alpha will fit up to a max 39 in. tire (when used with tailgate reinforcement). All necessary hardware is included. Features and benefits: * Innovative and unique design with easy adjustability * Relocates third brake light from behind tailgate to behind spare tire * Third brake light quick-release * Includes new hard-anodized billet aluminum rear view camera mount * Maintains single one-handed entry to the rear cargo area * Eliminates tailgate stress and rattles * No aftermarket bumper purchase required; works with OEM and most aftermarket bumpers * Ease of installation; can be performed using common hand tools, no drilling required * 1,000-hour extreme salt spray testing * OEM-quality UV-resistant powdercoat finish
( 1 )
$323.98
—
$362.69
Instant Rebate
TeraFlex Jeep JL/JT Dana 30/44 heavy-duty ball joints are designed to fit all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles. These heavy-duty ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. Whether you want to restore your stock chassis to like-new performance or you're looking to improve upon the factory design, TeraFlex has got the right upper and lower ball joints to replace your worn out, damaged, or inferior ball joints.
( 3 )
$280.44
Instant Rebate
The TeraFlex 9550 VSS steering stabilizer reduces bump steer, front end shimmy, and wobble in modified Wrangler models with lifted suspension systems and larger off-road tires. This stabilizer is superior to the factory unit and meets the additional demands and stresses of a modified off-road vehicle.
( 6 )
$71.09
Instant Rebate
Get the extra clearance you need with these TeraFlex Jeep wheel offset adapters. TeraFlex knows that many people want to run oversized tires and need extra clearance--that's why they came up with these adapters. These adapters are fully machined and come complete with pressed-in wheel studs and spacer lug nuts. You can choose to use your factory bolt pattern or alternate patterns and gain much-needed clearance at the same time. Get back out on the trail, where you know you belong, with TeraFlex and these Jeep wheel offset adapters.
( 7 )
$125.99
—
$126.89
Instant Rebate
TeraFlex Falcon Nexus EF 2.2 Fast Adjust steering stabilizers offer a wide range of adjustability with a 3-position fast adjust knob featuring soft, medium, and firm settings. These Jeep-specific steering stabilizers deliver a properly weighted steering feel and consistent bi-directional turning for balanced and controlled side-to-side steering response and an equal return to center dynamics. Built from the ground up with a focus on fitment and function, these Wrangler-specific Falcon Nexus EF (Equal Force) steering stabilizers deliver the best damping characteristics possible.
Not Yet Reviewed
$391.49
Instant Rebate
TeraFlex Alpha HD hinged spare tire carrier and mount kits secure your spare tire over the most extreme trails and rugged terrain—and will still provide easy access to the rear cargo area in one smooth action. Using the factory tailgate hinge mounting points spread the load of the spare tire over a larger area for maximum strength and durability. Internal gussets and bracing in the stock JK body supports the spare tire carrier and oversized tire, which eliminates all stress from the tailgate. Alpha HD spare tire carriers also provide additional mounting points for your off-road accessories, such as a recovery jack and fluid containers. Fuel your passion for all things off-road with innovative products from TeraFlex! Product features and benefits: * Innovative and unique patented design * Heavily gusseted tire mount is formed and welded from CNC laser-cut steel for superior strength * OEM-quality UV-resistant powdercoat finish * Accommodates up to 37 in. spare tire * Maintains single-handed entry to the rear cargo area * Easy fore/aft and height adjustments * Eliminates tailgate stress and rattles * Works with OEM and most aftermarket bumpers * Threaded mounting holes for mounting accessories (fuel cans, recovery jack, etc.) * Strong and lightweight A356.2 T-6 cast aluminum * Factory form fitting geometry and finish for an OEM appearance * Simple installation using common hand tools * No drilling required (uses factory mounting locations) * Dedicated CAD-designed tooling and CAE design * FEA validation, ASTM, and SAE testing procedures * 14,000-cycle severe duty slam testing * 1,000-hour extreme salt spray testing Kit includes: * Alpha HD hinged spare tire carrier * Alpha HD adjustable spare tire mount kit
Not Yet Reviewed
$918.89
Instant Rebate
TeraFlex front adjustable track bars locate the axle side-to-side in the vehicle. They're designed to raise and lower with the suspension movement in an arc that matches the arc of the drag link. These track bars can be adjusted to achieve that optimum angle to maximize suspension travel and efficiency. They'll also eliminate bump steer problems without the need of drilling any holes. When you're ready to lift your vehicle, TeraFlex front adjustable track bars will eliminate any steering or suspension travel issues that may occur. Order the model recommended for your Jeep application.
( 7 )
$320.39
—
$333.89
Instant Rebate
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$395.99
Instant Rebate
TeraFlex Jeep JT Gladiator 1.5 in. spacer leveling kits allow you to run a larger tire with added clearance on the trail, and maintain family-friendly versatility. Not only do these kits clear larger tires, but the additional height helps compensate for heavier aftermarket bumpers and winch, a larger spare tire, or weekend gear. They also work with stock-length shock absorbers (not included). Satisfy your primal need to go big, while wisely keeping your Jeep's everyday functionality with a TeraFlex Jeep JT Gladiator 1.5 in. spacer leveling kit. Features, items, and specs: * 33 in. maximum tire diameter with stock wheel backspacing for Sport/Overland fenders * 35 in. maximum tire diameter with stock wheel backspacing for Rubicon fenders * 1 in. and 0.5 in. lift front coil spring spacers included * 1 in. front bump stop strike pad extensions * All necessary hardware * Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35 in. or larger tires * Wheels with less than stock backspacing require at least 0.5 in. rear bump stop strike pad extensions (not included) to avoid tire rubbing on inner fender liner at full compression when articulated
( 6 )
$115.19
Instant Rebate
TeraFlex quick-disconnect sway bar end links are designed to allow your vehicle to maximize the amount of suspension travel. They feature a removable center section and built-in lanyards for sway bar retention. The end links are made from high-grade steel and are powdercoated to ensure protection from harsh elements.
( 5 )
$155.98
Instant Rebate
TeraFlex Jeep KL Cherokee 2 in. Performance Spacer Lift Kits are the most economical way to raise your unibody Jeep SUV with the fewest modifications. They deliver the maximum amount of lift without causing premature IFS (independent front suspension) failure. These lift kits provide the perfect amount of clearance to fit larger tires for backcountry exploration without compromising factory handling and suspension control for a balanced highway ride—making them perfect for daily drivers and weekend travelers!
( 3 )
$188.09
Instant Rebate
Would you like to improve the stance of your Wrangler? If the answer is yes, then TeraFlex Jeep JK Wrangler 1.5 in. leveling kits are just what you need! They are perfect for leveling your JK--and adding just a touch of lift to compensate for aftermarket bumpers or a full-size spare. All necessary hardware is included to do the job.
( 20 )
$210.59
Instant Rebate
TeraFlex RockGuard Crest front bumpers complement your Jeep's body with eye-catching design, while offering the ultimate rock protection. Their low-profile design is for a centered drum winch, and fits all major winch models with center bolt pattern, including the larger Warn Zeon. Also Crest bumpers' modular design will accept the optional hoop and skid plate (available separately) for added protection. These front bumpers feature robust steel construction with a durable textured black powdercoat finish, and the installation is 100 percent bolt on. Additional features: * Winch mount integrated into bumper design * Recessed mounting allows more grille space for taller winches and increased radiator airflow * Features two D-ring mounts * Panel blanks included to hide mounting holes for hoop * Lifetime warranty on bumper defects; 90-day warranty on powdercoat finish
Not Yet Reviewed
$593.99
Instant Rebate
TeraFlex Jeep JK Wrangler spring spacers level out your JK if it's dipping in the front from winch weight, or just needs to be leveled out due a heavy load. They are designed to work in stock configurations or with a lifted vehicle and are available in various sizes for the front or rear to fill your application needs.
( 19 )
$22.99
—
$40.99
Instant Rebate
TeraFlex hand throttle kits are designed to control the throttle position at idle while taking on off-road terrain. They are especially effective when the clutch, gas, and brake pedals need to be used together. TeraFlex hand throttle kits come complete with everything you need to install them on your off-road vehicle.
( 4 )
$47.69
Instant Rebate
TeraFlex sway bar end links are designed to reduce clearance issues between the tire and rear sway bar. The upper links utilize a sealed narrow shoulder tie rod-type ball socket for maximum tire clearance. The sway bar links are constructed within OEM-quality standards to provide long-term durability. TeraFlex sway bar end links are offered for the front and rear of your Jeep. Note: These links will not work with the rear S/T trail sway bar system.
( 1 )
$73.79
Instant Rebate
TeraFlex's unique Extreme Short Shaft kit requires a compact speed sensor. The electronic speed sensor and harness design both work in conjunction with the low-profile tone ring—to deliver accurate and dependable speed signals to electronic-style instrument clusters. The rugged transfer case speed sensor and its harness are a direct plug-and-play for most late model applications. Order the TeraFlex speed sensor connectors designed for your vehicle application.
( 6 )
$73.79
Instant Rebate
TeraFlex lower ball joint preload adjusting tools enable you to easily to adjust the lower ball joint preload amount. This preload tool is a must have for your new or broken-in TeraFlex HD ball joints.
( 1 )
$13.49
Instant Rebate
TeraFlex universal roll cage anchor plates are designed for custom tube projects that need a disconnect for access to components. These foot plates are manufactured from 3/16 in. thick steel and designed with two 1/2 in. bolt holes that are 3 7/8 in. on-center wide, and two 1/2 in. bolt holes that are 2 13/16 in. on-center high.
Not Yet Reviewed
$8.09
Instant Rebate
TeraFlex Jeep JL/JT load leveling spacers provide additional suspension height to help compensate for heavier aftermarket gear, such as bumpers, a winch, a larger spare tire, or weekend swag. The spacers are available for front or rear, or in a kit with both front and rear. TeraFlex Jeep JL/JT load leveling spacers work with original or stock-length aftermarket shock absorbers, like their Falcon shocks.
( 3 )
$46.79
Modal Header