Availability
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$2,599.00
Increase the horsepower in your Cummins with a BD Diesel Iron Horn Cummins turbo kit. These packages are available for a variety of specific year, make, model, and engine applications. Features and benefits include: * Increased airflow for more power, response, and reliability * Replace your factory turbo with a 300 Series SX-E BorgWarner T4 flange turbo * Includes a BD Performance Plus exhaust manifold and gaskets * No extra piping required; turbo drops into place for an easy, clean installation
( 1 )
$2,094.00
—
$2,296.00
Tired of dealing with the Ford Twin Scroll turbo ball bearing failures, ATS Diesel Performance set out to build, from the ground up, a completely redesigned turbo for the 2011-14 Ford 6.7L F250/350 and the 2011-16 Ford Cab and Chassis. Utilizing years of technology with proven reliability from its existing Aurora VFR Turbo, line the Aurora 400 VNT Stage 2 represents the future of ATS turbocharger technology. These are performance turbos specifically designed to be drop-in replacements when modified tuning is already in place. From a double journal bearing to a billet compressor wheel, ATS spared no expense bringing the best turbo available to market for these Ford trucks. Additional details: * 100 percent all-new components, no core charge. HSM turbine housing and stainless steel VNT turbine pack * Ground up design, application-specific models available for Ford 2011-14 6.7L and 2011-16 Cab and Chassis trucks * Custom double journal bearings support higher horsepower and significantly better reliability over the original ball bearings * These are drop-in replacement turbos to replace the factory twin scroll turbo; no additional hardware or piping is required * Specially designed to support modified or aftermarket tuning (aftermarket tuning required) * All-new ATS VNT technology * Custom billet 8x8 compressor wheel * Oversized mixed-flow turbine wheel * ATS velocity stack compressor section * Will support well over 500 hp * Fully hydraulic actuator * The ATS VNT is 100 percent rebuildable and designed with modular components, making it sustainable for decades of use
Not Yet Reviewed
$2,559.99
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,230.00
—
$3,406.00
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
—
$3,099.00
Standard Motor stock replacement remanufactured turbochargers use quality components to ensure maximum performance. These units are automaker- and vehicle-specific for easy fitment and installation. Most turbos include OEM electro hydraulic control valves, eliminating the need to purchase separate parts. Find the model recommended for your application, then save money with a pre-owned and re-vitalized turbocharger from Standard Motor.
Not Yet Reviewed
$965.99
—
$1,028.99
Edelbrock offers Twin-Force Stage 2 Turbo System for a variety of applications—with or without a tuner included. Are you ready for the next level of performance? These systems include all of the great components of the State 1 Power Package, PLUS a pair of turbos incorporating the latest turbocharger technology from Garrett. * Model 158332 includes a tuner with the Stage 2 calibration—and offers a 150 RWHP gain over stock * Model 158330 does not include a tuner, which allows the installer to use an existing tuner to flash the appropriate calibration into multiple vehicles.
Not Yet Reviewed
$5,731.95
—
$6,502.95
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$2,017.99
If you hear excessive whistling noises or believe your stock turbo is damaged, you need Standard Motor stock replacement new turbochargers. These 100 percent new units are designed for a direct-fit installation into specific gasoline or diesel applications. They come ready to roll with high-grade materials and complete gasket kits to ease installation.
( 1 )
$2,276.99
VS Racing offers a wide range of turbochargers for your horsepower-boosting target. Whether you need greater airflow for racing, some boost for the street, a higher A/R ratio for smoothness, or a low A/R ratio for the drag strip, VS has a turbo to enhance your performance. They're available in dozens of sizes, configurations, and other options.
( 22 )
$1,099.00
Maximize your diesel truck's performance and pulling power with aFe BladeRunner turbochargers. The turbochargers are optimized for maximum boost response, as well as overall power. The compressor housings are made of premium cast aluminum and feature a ported shroud design that eliminates dangerous compressor surge. Each of these turbochargers feature specifically designed trims that are aimed at maximizing power and throttle response for your given power goal. For maximum boost response and the ultimate torque delivery, aFe BladeRunner turbochargers will help you get there. Order the model that is best suited to your application needs.
Not Yet Reviewed
$1,766.10
—
$3,185.70
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$4,499.00
BD Diesel remanufactured turbo head units use the latest in aerodynamic technology and materials that feature lightweight, extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. They feature a new look with natural finished cast aluminum that meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured turbo head units won't let you down.
Not Yet Reviewed
$1,539.95
—
$2,387.00
BD Diesel 6.7L Powerstroke Stage 1 retrofit turbochargers allow you to bid goodbye to the petite and problematic GT32 SSTs of the early model Fords. These complete turbocharger solutions utilize modern turbo technology to deliver up to 66 lb. per minute of increased airflow without compromising on low-end response. Everything you require is included to drop in the new in place of the old unit, no extra pieces needed. Features: * Replaced with larger GT37 model, solve the common Ford Single Sequential Turbocharger (SST) failure * 61 mm single-sided compressor wheel * Mixed flow turbine (MFT) wheel with 62 mm exducer * VSR high-speed balanced * Kit includes a BD custom cast turbine housing, backing plate, compressor cover, and pedestal * Please note: BD Diesel Stage 1 retrofit turbochargers will require a tuner to ensure no faults codes are set
Not Yet Reviewed
$4,683.00
BD Diesel 6.7L Powerstroke Stage 2 retrofit turbochargers allow you to bid goodbye to the petite and problematic GT32 SSTs of the early model Fords. These complete turbocharger solutions utilize modern turbo technology to deliver up to 81 lb. per minute of increased airflow without compromising on low-end response, and boost pressure can be increased to improve horsepower potential. Everything you require is included to drop in the new in place of the old unit, no extra pieces needed. Features: * Replaced with larger GT37 model, solve the common Ford Single Sequential Turbocharger (SST) failure * 64 mm billet compressor wheel * Custom mixed flow turbine (MFT) wheel with 65 mm exducer * More boost, lower drive pressure, and lower EGTs * Kit includes a BD custom cast turbine housing, backing plate, compressor cover, and pedestal * Please note: BD Diesel Stage 2 retrofit turbochargers will require a tuner to ensure no faults codes are set
Not Yet Reviewed
$4,798.00
Edelbrock Twin-Force Stage 1-2 Turbo System Upgrade Kits will upgrade your Edelbrock Twin-Force Stage 1 Power Package to a Stage 2 Turbo System by adding driver and passenger turbochargers. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54 percent increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52 percent increase in turbine flow. The 2.75 in. compressor inlets are 38 percent larger than the factory turbos, complementing Edelbrock's high-flow turbo inlet piping. When combined with Edelbrock's larger Intercooler, air inlet tubes, and high- flow air filter, these turbochargers offer huge increases in power potential for this application.
Not Yet Reviewed
$4,523.95
BD Diesel remanufactured performance turbo head units use the latest in aerodynamic technology and materials that feature upgraded 58mm lightweight extended-tip compressor wheels with high-flow blade design characteristics for improved throttle response time. They offer cooler exhaust temperatures, improved engine brake retarding power, and the most rugged bearing system in the turbo industry. Their updated look with natural finished cast aluminum meets the highest of standards. If you're looking for a remanufactured turbo head unit that will give you consistent, dependable performance, BD Diesel remanufactured performance turbo head units won't let you down.
Not Yet Reviewed
$2,130.00
PowerMax Performance Diesel turbochargers supply your light-duty diesel with the best components for optimizing power, response, and efficiency. PowerMax turbochargers are quick-spooling, high-flowing turbochargers with the right blend of design features that will upgrade power and torque, while lowering EGTs for select diesel trucks. Whether you own a Ford, Dodge, or GM diesel pickup truck, PowerMax has a ball-bearing turbocharger for you! Turbocharger and installation instructions, as well as other components needed for your specific application are included. Features and benefits of PowerMax turbochargers: * Large bore inducer--allows greater airflow for high performance diesels with increased fuel flow * Advanced design compressor wheels--extremely high-efficiency, backward-curved impellers, which allow for a broad airflow range to match the needs of diesels * Exclusive true angular-contact ball bearings--meaning the turbo spools up to 15 percent faster, is capable of high-thrust loads seen in high performance/high-boost applications, and increases overall turbo efficiency by reducing power consumption by nearly 50 percent over traditional journal bearing designs * Performance enhancing oil restrictor--optimizes oil flow for proper lubrication and cooling, while limiting turbo rotational drag which robs power and efficiency * Divided turbine housing--divider wall within the turbine volute optimizes pulse gas energy, which gives greater response and turbine efficiency during low-end and mid-range operation * Ultra-high pressure/high-efficiency turbine--extracts a maximum of energy from the engine's exhaust. Using GMR235 super alloy, the turbine wheel design is optimized for high exhaust flow, and low weight to reduce moment of inertia assisting in crisp response to changes in engine speed * Turbine outlet connection--designed to fit as a direct drop-in to enhance the ease of upgrading stock turbos * Turbine heat shielding--PowerMax utilizes a heat shield to create "dead air space" insulation barrier to keep high exhaust heat energy in the turbine to be converted to mechanical energy, and away from bearings and oil * Design optimized turbine housing--advanced 3D modeling and computational fluid dynamics are used to optimize the volute shape, and the housing is also equipped with an adjustable wastegate allowing adjustment for optimum boost levels * Oil control and seal--a double-row flinger which drives drain oil away from the gas seal rings virtually eliminates compressor oil sealing problems
( 3 )
$2,999.99
—
$4,206.99
aFe Twisted Steel turbo downpipes are designed to replace the stock downpipe. Mandrel-bent throughout, these quality-built turbo pipes are an ideal upgrade to a cat-back system, offering the option to upgrade to high performance catalytic converters. These aFe Twisted Steel turbo downpipes help reduce backpressure and lower EGTs for better performance.
Not Yet Reviewed
$1,457.40
Offering a 200 hp increase at the tires over stock, Edelbrock Twin-Force State 3 Turbo Systems will unleash the max potential of your truck. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54 percent increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconnel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52 percent increase in turbine flow. The 2.75 in. compressor inlets are 38 percent larger than the factory turbos, complementing Edelbrock's high-flow turbo inlet piping. The new turbochargers—combined with Edelbrock's larger intercooler, air inlet tubes, and high-flow air filter—offer huge increases in power potential for this application. To complement the improvements in airflow, the Stage 3 kits include an electronic booster for the fuel pump, enhancing fuel delivery and unlocking even more power potential. A flashing device (tuner) is included for flashing the Edelbrock Stage 3 calibration into the trucks PCM. The included calibration is specifically engineered for the components included in these kits—and takes advantage of this increased power potential, while keeping this upgrade to your truck EPA legal. Product notes: * New turbos with the latest turbocharger technology * Bolt-in installation with no fabrication required * EPA legal calibration and tuner (requires a PC) * OEM quality fit and finish * 200 hp gain at the wheels over stock
Not Yet Reviewed
$7,122.95
MagnaFlow turbo downpipes feature stainless steel construction for maximum flow capacity and a T304 stainless steel flex joint for durability. They bolt to the bottom of the stock turbo housing and even retain the OEM oxygen sensor location. With their unique outlet design, these MagnaFlow turbo downpipes can bolt to the stock catalytic converter and can be fitted to virtually any aftermarket cat-back exhaust system.
( 2 )
$199.00
—
$205.00
MBRP Performance Exhaust offers Armor Lite Series downpipes for a variety of applications, including Dodge and Ram diesel trucks from 2003 and up. They're JIG-manufactured to ensure total accuracy when replacing exhaust components on your vehicle. Smooth mandrel bends deliver excellent airflow, and the heavy-duty aluminized steel provides a long service life. MBRP's most value-oriented material, the tough aluminized mild steel is a great option for dry climates with no rain or salt. Push the limits! Gain extra power, lower exhaust gas temperatures, and bulk up exhaust flow via the fastest path from the turbo to the tip. MSRP Armor Lite downpipes are the upgrade you need.
( 1 )
$184.99
Clearance
Engineered for their diesel exhaust systems, Corsa downpipe kits feature mandrel-bent premium stainless steel construction, crafted with pride and precision. Corsa's reputation ensures great quality and fit for your vehicle, with their innovative straight-through design for greater flow and better performance. Combine Corsa Performance downpipe kits with their cat-back exhausts—for turbo systems with major gains in exhaust flow versus stock systems. These downpipes are available in a variety of configurations for fitment on specific year/make/model vehicles.
Not Yet Reviewed
$1,001.99
$720.50
—
$747.99
On Sale
XForce dump pipes allow for easier release of the high pressure built inside the turbo, thus preventing clogging, and allowing the engine to breathe more freely. In turn, you get more horsepower, throttle, and better fuel economy. Manufactured using a specific, clever design, these dump pipes are made of high-quality 304 stainless steel and a mandrel bend construction, whereas stock exhaust pipes are manufactured using mild steel. Ensure the free flow of exhaust gases through your exhaust system for your vehicle's efficient performance with XForce dump pipes! Order the model for your application.
( 6 )
$395.10
—
$719.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
