Free Shipping on Orders Over $109 at Summit Racing

Thule Xsporter Pro Shift Truck Racks

Thule Xsporter Pro Shift truck racks offer front-to-back adjustability. Designed to work with Thule TracRac base rails (sold separately), the Shift racks have the ability to move anywhere along the bed rails offering greater flexibility to carrying different equipment, from a rooftop tent to a basket or any cargo up to 600 lbs. They also work with certain tonneau covers using the TracRac base rails system. Thule Xsporter Pro Shift truck racks are aerodynamic, include load stops and locks, and feature durable, corrosion-resistant, powdercoated aluminum construction. Additional features: * Designed to fit most compact/full-size pickup trucks with the use of the correct 21000 base rail * Rack is at the ideal height of 18 in. to easily access the truck bed * Rack sits below cab of truck for improved aerodynamics * AirTrip technology integrated into the bar to redirect airflow for superior aerodynamics * WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy * Rubber WindDiffuser strips included for each crossbar also protect the crossbar from damage * Aluminum Aero load stops adjust to secure different size loads * Theft-resistant system locks rack to base rail (locking knobs included) * Accommodates a variety of Thule accessories

Not Yet Reviewed

$899.95

ididit Retrofit Floor Shift Steering Columns

Better than stock replacements--ididit retrofit steering columns are designed to ensure a perfect fit and a flawless installation in your specific vehicle. The hot rod experts at ididit engineered these columns to fit in the factory location and, in many cases, will put your steering wheel back in its original location. Your column may include (depending on your application) 8-position tilt, self-canceling turn signals, 4-way flashers, a shaft, knobs, levers, and a wiring plug. Fitting your Ford, Chrysler, Chevy, or even Mopar classic with a perfectly planned aftermarket steering column is easier than ever, thanks to ididit retrofit steering columns.

4.52 out of 5 stars ( 222 )

$1,010.00

—

$1,190.00

Hurst Axle Conversions With Limited Slip Differentials

Early GM trucks all came with 6-lug axles. Not only does this limit your wheel choices, but it restricts your options on brakes as well. Hurst axle conversion kits offer a solution. The axles in these 5-lug conversions are made from 1541H alloy for supreme strength and durability. The kits are designed for the 8.875 12-bolt rear-end with the axles featuring 30 spline ends, a 5 x 5 in. lug pattern, and have a 30 3/4 in. length. Choose the kit for your year truck and always look to Hurst Engineering for your truck axle needs. Features: * Complete kit includes limited slip differential making installation a breeze * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 30 3/4 in. long for a direct replacement * 5 x 5 in. lug pattern * Fits 8.875 in. GM truck 12-bolt * Kits include axles, limited slip differential, and drum brake assemblies

Not Yet Reviewed

$1,177.95

Hurst Axle Conversion Kits

Early GM trucks all came with 6-lug axles. Not only does this limit your wheel choices, but it restricts your options on brakes as well. Hurst axle conversion kits offer a solution. The axles in these 5-lug conversions are made from 1541H alloy for supreme strength and durability. The kits are designed for the 8.875 12-bolt rear-end with the axles featuring 30 spline ends, a 5 x 5 in. lug pattern, and have a 30 3/4 in. length. Choose the kit for your year truck and always look to Hurst Engineering for your truck axle needs. Features: * Complete kit makes installation a breeze * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 30 3/4 in. long for a direct replacement * 5 x 5 in. lug pattern * Fits 8.875 in. GM truck 12-bolt

5.0 out of 5 stars ( 1 )

$499.95

On Sale

Hurst Transmission Crossmembers

Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.

4.14 out of 5 stars ( 7 )

$484.95

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.46 out of 5 stars ( 63 )

$1,849.99

—

$6,190.99

TCI StreetFighter Transmissions

TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.

3.57 out of 5 stars ( 145 )

$1,772.95

—

$4,996.95

FTI Performance TH400 Level 4 Transmissions

FTI Performance TH400 Level 4 transmissions feature a full manual valve body equipped with a transbrake for the ultimate drag racer. They make an excellent choice for weekend bracket racers, high-powered street cars, and mud trucks. The transmissions have: a 34-element intermediate sprag, performance clutches and steels, high-flow pump, race-prepped stock case, deep aluminum pan, billet forward clutch hub, heavy-duty intermediate retainer, and a 4-clutch intermediate pack. Some models are compatible with Ultra Bell bellhousings.

4.54 out of 5 stars ( 13 )

$2,499.00

TCI Super StreetFighter Transmissions

TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.

3.84 out of 5 stars ( 58 )

$2,085.95

—

$4,932.95

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 46 )

$2,895.00

TCI Maximizer 4x4 Transmissions

Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.

3.32 out of 5 stars ( 31 )

$1,596.95

—

$4,976.95

TCI Competition Transmissions

TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!

3.5 out of 5 stars ( 32 )

$1,853.95

—

$3,830.95

TCI Heavy-Duty RV Transmissions

For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.

3.67 out of 5 stars ( 3 )

$2,349.95

—

$8,000.95

On Sale

B&M Street and Strip Transmissions

B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.

3.29 out of 5 stars ( 14 )

$3,849.95

—

$4,150.95

$3,463.95

—

$3,734.95

Hughes Performance Street and Strip Transmissions

Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.

3.87 out of 5 stars ( 30 )

$2,069.99

—

$4,570.99

VEGE Remanufactured Automatic Transmissions

VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.

4.5 out of 5 stars ( 10 )

$2,174.99

—

$5,338.99

FTI Performance Pro Powerglide Level 3 Transmissions

Racing is for pros--FTI Pro Series Powerglides! Their Level 3 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 3 Powerglides are designed and built for racers on a budget that need an unbreakable unit that can handle the rigors of their high performance engine in any extreme environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 3 transmissions feature: * 1.80 straight-cut gear planetary * 300m input shaft * Lightened steel clutch hub * 6-clutch drum * Race-prepped stock case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Billet dual ring servo * 4340 output shaft * 2-piece shift lever

4.5 out of 5 stars ( 4 )

$2,899.00

—

$3,499.00

FTI Performance 700R4 Level 2 Transmissions

FTI Performance 700R4 Level 2 transmissions are designed for street rodders or cruisers who want mild power, fuel mileage, and reliability. They include a performance-calibrated valve body and governor for maximum durability. FTI Performance 700R4 Level 2 transmissions feature: * 9-clutch 3-4 high energy pack * High-energy performance band * Performance servo * Oversized performance boost valve * Hardened sun gear drive shell * Hardened pump rings * Mechanical speedometer drive gear * Throttle TV cable * External lockup plug connector * Filler tube and stick

1.0 out of 5 stars ( 4 )

$2,950.00

TCI Street Rodder Transmissions

The economical TCI Street Rodder transmission is ideal for small block powered vehicles, producing up to 400 hp—perfect for a mild daily driver or street rod. Equipped with a TCI automatic valve body and valve body improver kit, the Street Rodder allows you to achieve a firmer, yet not too harsh shift in the vehicle while remaining fully automatic.

3.6 out of 5 stars ( 5 )

$3,495.95

FTI Performance Pro Powerglide Level 4 Transmissions

Racing is for pros--FTI Pro Series Powerglides! Their Level 4 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 4 Powerglides are designed and built for serious racers, that not only need value, but demand dependable, consistent performance while handling the rigors of their high performance engine--in any environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 4 transmissions feature: * 1.80 straight-cut gear planetary * 300m hardened input shaft * Steel clutch hub * 6-clutch drum * Aftermarket SFI-approved case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Red race clutches

3.0 out of 5 stars ( 1 )

$4,699.00

TCI 4x4 Full Manual Competition Transmissions

Whether you drive a sand dragger, hill climber, or tractor puller, TCI has the transmission for you. The competition line of full manual 4x4 transmissions is built following the same specifications TCI uses in building thousands of drag race units. Applications are also available with trans-brake valve bodies.

1.0 out of 5 stars ( 1 )

$2,297.95

Summit Racing™ Performance Transmissions

Think you have to drain every last penny from your bank account to get a quality transmission? Think again. Our Summit Racing™ performance transmissions have been manufactured with all-new, high performance components. Features include a high-volume pump, performance clutches and steels, a recalibrated full manual trans-brake valve body, heavy-duty sun shell, deep aluminum pan, and high-quality seals and gaskets. You get all these quality upgrades, plus reliable performance from Summit Racing™ performance transmissions.

5.0 out of 5 stars ( 1 )

$3,199.99

FTI Performance TH400 Level 3 Transmissions

FTI Performance TH400 Level 3 transmissions are designed for the racer who needs performance at the track without a transbrake. They're equipped with a full manual valve body (forward or reverse pattern), performance clutches and steels, high-flow pump, race-prepped stock case, deep aluminum pan, and rollerized output shaft. These transmissions make an excellent choice for foot brake racers, high-powered street cars, and mud bog trucks.

5.0 out of 5 stars ( 1 )

$2,449.00

—

$2,799.00

Silver Sport EasyFit Tremec TKX Transmission Kits

Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty

4.0 out of 5 stars ( 6 )

$4,095.00

—

$4,495.00

155 Results Found For "shifter"