Availability
Our Summit Racing™ 3 ton steel low profile floor jacks can fit under vehicles that other jacks cannot. Their low profile construction can go as low as 3.3" and are built to withstand the demands of professional shop use. They feature a dual piston design with quick lift pump action, and are constructed from high-grade steel with a powder coated finish and ball bearing rear casters for superior mobility across your workshop or garage floor. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.
( 5 )
$179.99
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty
Not Yet Reviewed
$8,999.00
—
$10,999.00
UWS Crossover Series slim line low-profile toolboxes are the tried-and-true American way of keeping your tools organized, on-hand, and fully secure—no matter where you and your truck roam. Each toolbox is built from extra-thick aluminum welded into a single-piece tub. This provides the toolbox with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. These toolboxes feature a slim-line design, providing adequate clearance for truck beds that have extremely limited space between the wheel wells and truck cab. To add even more strength to the crossover truck toolbox, the lid features UWS's patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid can open to a full 90 degrees, providing a better way to store your tools.
Not Yet Reviewed
$656.95
Rough Country's hard low-profile bed covers are built for adventure. These tri-fold tonneau covers deliver a streamlined design that enhances your truck's off-road look while safeguarding your gear. Update your truck bed, secure your gear, and hit the trails with peace of mind. Rough Country's hard low-profile bed covers are perfect solutions for those who demand both style and functionality. Select the one designed for your truck. Features: * Flush, low-profile design with stylish matte black finish frame and aluminum panels * Tri-fold design allows quick access to cargo * Corrosion-resistant black powdercoated aluminum frame * Secure track and rail mounting system with drain tubes included * Nylon straps secure the cover in the 2/3 open position * Drive with the cover in the 2/3 open or closed position * Auto latching design secures on closure * Single cable pull for easy latch release and access * No-drill easy install and removal--all tools included * Nylon safety straps included * 5-year warranty
Not Yet Reviewed
$799.95
Easily transport and transfer diesel fuel in the back of a pickup truck. John Dow low-profile carrytanks are specifically designed to fit flush within the bed of a pickup truck so you get the convenience of a portable refueling station for your farm, construction, recreation, industrial, and fleet locations. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill level gauge * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides IMPORTANT: This carrytank is for use with diesel fuel only. DO NOT use with gasoline or other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.
( 2 )
$1,208.99
Wilwood Forged DynaPro low-profile rear electronic parking brake kits provide a complete solution for popular muscle car rear axles on applications that require a parking brake assembly and extra clearance for 14.00 in. to 15.00 in. rim applications. Forged billet DynaPro low-profile 4-piston calipers, 11.00 in. one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The unique electronic parking brake caliper provides high-torque static holding power for parking without mechanical cabling. Supplied with a control unit and harness assembly, it simplifies installation and use. Optional caliper finishes and rotor designs enable builders to personalize the style and optimize brake performance for every individual application.
Not Yet Reviewed
$2,185.55
—
$2,323.05
Go Rhino Ceros low-profile roof racks deliver added functionality and cutting-edge style to your truck with easy, no-drill installation and Go Rhino's exclusive 4-CORE crossbars. Featuring aluminum construction, a textured black finish, and a 5 in. tall fairing with dropped front edge, the racks have a sporty, aerodynamic design that outlines the curves of your truck's roof with an application-specific fit. The 4-CORE crossbar extruded track system works with any 1/4 in.-20 hex bolt and offers unlimited mounting options for your accessories, gear, and tools. Go Rhino Ceros low-profile roof racks also allow you several lighting options to add illumination on the front and sides. Choose the rack designed for your truck. Features: * Fairing with dropped front edge allows most single row light bars to remain flush with frame * Four side panel slots with removable, rattle-proof mesh screens fit most 6 in. single row (SR) lights * Front 4-CORE rail supports front fairing and allows for easy, secure mounting of individual lights and light bars * No drilling required; all mounting hardware included * Limited Lifetime warranty on materials and construction * 5-year warranty on the textured black finish
Not Yet Reviewed
$864.99
John Dow low-profile oil drains offer easier options for oil changes on HD trucks, buses, RVs, and other low-profile heavy-duty equipment. They're available in a variety of materials and capacities—all of which can stand up to the toughest shop conditions. Each oil drain features expanded metal shields to reduce splash and long-reach T-handles that make positioning the drain under your vehicle easier; plus, the handles fold for compact storage. 17 gallon capacity models feature: * Heavy-duty steel—or lightweight polyethylene or polypropylene construction * Steel has 10 in. ground clearance * Polyethylene model has 7 3/4 in. clearance * 6 in. industrial casters on steel drains; front casters swivel, rear are fixed * 4 in. casters on polyethylene * Steel 17 gallon has enclosed reservoir to prevent spillage during transport and includes a gate valve for gravity draining * Polyethylene has recessed drain valve for optimal protection and rib-reinforced reservoir for added support 25 gallon capacity models feature: * Rugged steel construction * 10 in. ground clearance * High-capacity drain for high-volume vehicles * Self-contained 110 V electric pump evacuation system * 10 ft. of quick-disconnect evacuation hose * Reservoir with internal baffles to prevent splashing during transport * 6 in. industrial casters; front casters swivel, rear are fixed
( 2 )
$487.99
—
$692.99
UWS Crossover Series low-profile deep toolboxes feature a patented RigidCore lid design and enhanced aluminum construction. The lids are filled with solid foam that strengthens them against bending or warping, and have self-opening mechanisms for convenient operation. Their lower profile offers a better view out your rear window, and the toolbox lids are equipped with two stainless steel paddle lock lift handles. UWS Crossover deep tub-style toolboxes are built with extra-thick, one-piece aluminum to be strong and highly resistant to corrosion; plus, they permit convenient operation from either side of the vehicle. Check the fitment, then order the style and finish you prefer.
( 1 )
$778.95
—
$904.95
So, you like to play on the rocks? Trail-Gear Rock Defense low-profile bumpers protect your rig while you're having fun! They are built strong from 1020 DOM tubing, making them more dent-resistant, as well as relinquishing any worries of split seams. Plus, they offer sleek looks without the stinger, so you have performance and style! Rock Defense are true bolt-on bumpers that come raw and ready to customize with whatever surface treatment you choose. For your next play date, dress your rig in Trail-Gear signature armor--Rock Defense low-profile bumpers--and enjoy roughhousing on the rocks!
( 19 )
$799.99
Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads raise the performance level over as-cast small block Chevy heads. Their 68cc CNC-machined combustion chambers and 235cc CNC-ported intake runners allow for the use of 2.125 in. O.D. intake valves over 335 cfm of airflow. Each unit is cast from aerospace A356 aluminum alloy and includes improved solid rocker bars for stability, drilled and tapped end pads, and revised spark plug locations for improved flame travel. For all-around performance on land or sea, install Pro-Filer small block Chevy All American Race Series CNC-ported cylinder heads. Additional Information: * Bronze guides for reduced stem wear * Available with or without water jackets * For 400+ c.i.d. engines * Use gasketed 3/4 in. reach plugs like NGK R5671-7 Series, or colder
( 1 )
$886.16
All-Pro Off-Road's 4Runner low-profile front bumpers are designed to fulfill your demand for a durable, low-profile bumper that looks as good as it functions. The bumpers are available in steel and lightweight aluminum versions, including models with hoop options for multiple lighting configurations. Aftermarket bumpers are a great way to add additional protection and functionality to the front end of your vehicle. There are a ton of different bumpers out there, but if you want to keep the OEM look and perform minimal cutting, the All-Pro Off-Road low-profile front bumpers are an excellent option. Choose the All-Pro Off-Road low-profile front bumper model that is designed for your application needs. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel faceplate version that provides a solid mounting structure to vehicle frame * Available in bare and black powdercoat option * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a single-row (30 in.) light bar (lighting not included) * Optional center hoop is tall enough to offer grille protection, as well as providing additional light mount tabs for pod lights (lights not included) * Integrated recovery points * Heavy-duty winch mounting (on select bumper versions) * Compatible with most 8-12k winches with a remote mount solenoid box (winch not included) * Includes mounting hardware * Bolt-on installation (cutting of factory plastic bumper required for installation)
( 1 )
$399.99
—
$849.99
Add a sleek look to your work truck with UWS Crossover Series low-profile toolboxes. These rough and tough truck boxes work hard to keep you organized and efficient on the job site. Plus, they sit 2 in. lower on your bed rail. Crossover truck boxes are available in polished bright or powdercoated diamond tread aluminum or durable powdercoated steel to fit your work needs and your truck's style! All UWS toolboxes provide great looking security with fully foamed lids, rust-free stainless steel lock handles, a connecting rod enclosure, MicroSeal weatherstripping, and built-in tool trays and holders--depending on your chosen toolbox. They're also available in angled and notched models to accommodate special bed sizes and wheel wells.
( 5 )
$530.95
—
$815.95
Ramsey's outstanding, American-made Patriot Profile series winches are packed with all the power and features you need to handle any pulling challenge. An efficient, 4.4 or 5.5 HP, 12 V, reversible electric motor provides the power, while a 3-stage planetary gear-reduction system provides the torque needed to get you out of any situation. Other features include a cam-action clutch that disengages the planetary gear set for free-spooling, a strong automatic load-holding brake, a weather-resistant solenoid assembly, and a 4-way roller fairlead.
( 1 )
$1,718.99
—
$3,458.99
OEM Automotive Tools low-profile floor jacks are built for efficiency and performance. Available in models capable of lifting 2 tons or 3 1/4 tons with minimal effort, they will be valuable additions to your garage or workshop for increased productivity. Both professional quality models are equipped with 360 degree rear swivel casters and padded handles, so you can quickly and easily position the jacks in any application, especially low-clearance vehicles, without scratching or denting vehicle while pumping jack. OEM Automotive Tools low-profile floor jacks meet ASME 2014 standards.
Not Yet Reviewed
$308.99
—
$599.00
UWS Crossover Series standard-profile toolboxes for your truck are working solutions for the working man. These rough and tough truck boxes work hard to keep you organized and efficient on the jobsite. Crossover truck boxes are available in polished bright or black powdercoated diamond tread aluminum or durable powdercoated steel to fit your work needs and your truck's style! All of these UWS toolboxes provide great looking security with fully foamed lids, rust-free stainless steel lock handles, a connecting rod enclosure, MicroSeal weatherstripping, and built-in tool trays and holders, depending on your chosen toolbox. Plus, they're available in angled and notched models to accommodate special bed sizes and wheel wells. Add a professional look and function to your rig--even if you're not a pro--with UWS Crossover Series standard-profile toolboxes.
Not Yet Reviewed
$530.95
—
$759.95
Get the ultimate in truck lighting and safety with Rough Country ditch-mount LED lights. They won't interfere with washer nozzle or spray pattern, and are specifically designed to add extra side lighting for increased visibility in the dark. Featuring multi-angle capability, you can move them in the direction you want, and the low-profile design will not affect the opening or closing of your hood or block your windshield wipers. Constructed with a 7-gauge material for improved strength and reduced vibration, Rough Country ditch-mount LED lights are designed to withstand harsh outdoor elements while providing you with clear visibility. They are finished with a durable black powdercoat to protect against corrosion, and carry an IP67 waterproof rating. Each kit includes a complete set of mounting brackets and hardware, with vehicle-specific hood hinge brackets to ensure an easy and perfect fit on your truck. Rough Country ditch-mount LED lights combine performance and style, providing a high-quality lighting solution without taking up valuable space on the front of your vehicle. They are available in several choices; flood or spot beam, with or without DRLs, or choose the Osram wide angle beam option. Select the style and beam designed for your truck, and hit the trails with superior nighttime illumination.
Not Yet Reviewed
$94.95
—
$199.95
Go Rhino 5 OE Xtreme low-profile bars are made of high-quality steel, polished stainless steel, or composite material. They feature sturdy plastic step pads for better traction while getting in and out of your truck or SUV—and are available in multiple sizes and finishes for hundreds of applications from 1999 and up. The step bars are not only extremely helpful to those with lifts, but are also a stylish addition to your rig.
( 1 )
$419.99
—
$709.99
Billet Specialties is in the business of being the best. Period. The Profile Collection is designed for discriminating enthusiasts that demand the best wheel available be featured on their car. The smooth sweeping curves and dramatic features of these wheels are the product of millions of lines of machining code executed on state-of-the-art CNC machines. Each wheel is hand buffed to an amazing polished finish. Even the point where the center meets the rim is nearly invisible. The depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. We hope you like the attention. The back of each Profile Collection wheel is all business – big brake ready with a range of backspaces to tailor fit your car.
Not Yet Reviewed
$1,629.99
—
$2,321.00
PRW low-profile Engine Test Stands (ETS) with short block adapter allows the mechanic to "build" the short block, and then rotate the engine to the upright position, just like a typical engine stand. Then, temporarily support the short block and install the center supports, remove the rotating head unit, and re-attach the rear engine supports to finish the engine assembly. After final assembly, install the fuel cell, plumb for fuel, wire the electrical, connect the battery, and you are ready to run! Obviously, this over-simplifies the necessary preparation and hard work; but a great deal of satisfaction can be gained with the knowledge that your engine is ready and worthy to be installed in your hot rod, race car, street machine, truck, boat, or off-road vehicle. The patented collapsible design of the ETS is manufactured with standard parts and readily available replacement parts from the manufacturer. They offer space-saving benefits when collapsed, making them ideal for the small shop or race trailer. PRW low-profile ETS are designed to accommodate most engines and built to meet the demands of high-output racing engines and heavier big blocks, taking mobile engine test stands to a whole new level of functionality.
Not Yet Reviewed
$1,948.42
Easily transport and transfer gasoline wherever it's needed! John Dow low-profile carrytanks provide the convenience of a portable refueling station for farm, construction, recreation, industrial, and fleet markets. They're specifically designed to fit within the bed of a pickup truck and below the height of the truck bed sides. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the gasoline carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill level gauge * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides * Internal baffle prevents sloshing during transport IMPORTANT: This carrytank is for use with gasoline fuel only. DO NOT use with other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.
Not Yet Reviewed
$1,838.99
BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with exciting performance. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer, fuel pump and feed line, 750 cfm carburetor, and front accessory drive * 30 month/50,000 mile warranty
Not Yet Reviewed
$9,949.00
Easily transport and transfer Diesel Exhaust Fluid (DEF) wherever it's needed! John Dow low-profile carrytanks provide the convenience of a portable refueling station for farm, construction, recreation, industrial, and fleet markets. They're specifically designed to fit within the bed of a pickup truck and below the height of the truck bed sides. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill Level Gauge * 12-volt transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides IMPORTANT: This carrytank is for use with Diesel Exhaust Fluid (DEF) only. DO NOT use with other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.
Not Yet Reviewed
$1,073.99
Want to make a statement? Billet Specialties Profile Collection Series wheels are designed, forged, and finished for the discriminating enthusiast. Produced from millions of lines of machining code executed on state-of-the-art CNC machines, each wheel blends multiple surfaces together to create dramatic features. Billet Specialties' Flare Extreme polished custom order wheels from their Profile Collection Series are hand-buffed to an amazingly brilliant finish--even the point where the center meets the rim is nearly invisible. The Extreme profile provides a 1/2 in. caliper clearance, and the depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. Profile Collection Flare extreme wheels will garner all the attention you've been wanting! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.
Not Yet Reviewed
$2,260.00
—
$2,665.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
