Filters
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,808.31
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$10,206.16
FAST Rectangular Port Supercharger/Camshaft Power Packages for GM LS3 provide the perfect paring of products for enthusiasts looking for 850+ hp potential from their GM LS3 engine. They feature Edelbrock's 2300 TVS supercharger with integrated intercooler and COMP Cams' LST camshaft designed for supercharger applications. These FAST Power Packages for GM LS3 have all the basics required to install the supercharger, but necessary accessories such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages for GM LS include: * 2300 TVS supercharger—integrated high-capacity, dual bar and plate intercooler enables major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.750 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Pushrods * Dual valve springs * Tool steel retainers * Valve locks and seals * Spring seats * Installation hardware
Not Yet Reviewed
$7,636.95
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,999.00
—
$9,484.00
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,047.87
—
$7,527.87
Edelbrock E-Force Corvette C6 Stage 2 track system supercharger kits transform your C7 Corvette into a force to be reckoned with! The kits utilize Eaton's Gen VI 2300 supercharger rotors, featuring the reliability for which Eaton is known. The Stage 2 system includes an intake manifold, pulley, belt and tune for the next step up for your C6. Dominate the track with the added influence of these E-Force supercharger kits from Edelbrock.
Not Yet Reviewed
$9,663.87
—
$10,953.87
Edelbrock E-Force Corvette C6 stage 1 street-legal supercharger kits are exclusively tailored to boost your performance. The unique features on these kits are 12 in. long intake runners that allow for maximum low-end torque. Plus, these Edelbrock E-Force street legal supercharger kits fit under the stock hood with no modifications.
( 3 )
$9,025.87
—
$9,376.87
ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.
( 1 )
$8,649.00
—
$9,354.00
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump
Not Yet Reviewed
$9,849.00
—
$14,349.00
BluePrint Engines Pro Series Chevy 427 c.i.d. 605 hp dressed stroker long block crate engines are factory dyno tested with a complete MPFI system. These GM LS compatible performance engines are capable of producing at least 585 hp and 520 lbs.-ft. of torque. The PSLS4278CTFK comes with LS cast aluminum intake, coil packs with spark plugs and wires, retro fit oil pan, water pump, harmonic balancer, all sensors to run the engine, gas pedal, with a polished front pulley kit. -- Description: * Horsepower and torque: 585 hp / 520 lbs.-ft. * Compression ratio: 11:1 * Aluminum heads * Hydraulic roller cam * Forged crank * Forged pistons -- Block: * BluePrint Engines high-strength cast iron (LSX style) block * Increased deck thickness and strength webbing * Extended cylinder skirt * Priority main oiling * 4.0695 in. bore * 6-bolt main * 1-piece rear main seal * Improved water jacket design * Utilizes OEM LS3 front and rear covers -- Rotating Assembly: * New forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced -- Cylinder Heads: * BluePrint aluminum cylinder heads - PS8015 * 69cc chamber * 2.165 in. Intake / 1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners -- Cam Specs: * Hydraulic roller * .624 Intake / .624 Exhaust lift * 239 Intake / 255 Exhaust duration * at .050-114 degree lobe separation -- Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission controller required -- Also Includes: * Drive-by-wire throttle body * BluePrint Engines cast aluminum intake manifold * 42 lb. injectors and returnless fuel rail * Harmonic balancer * Valve covers * Retro fit oil pan * Timing cover * Coil packs * Spark plug and wires * Wiring harness * Gas pedal * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor -- Notes: * This engine requires a non-weighted flex plate/flywheel. * Recommended Fuel: 91 Octane. * The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. * BluePrint Engines recommends a 2200+ RPM stall converter. * Retro fit oil pan will fit most 1955-95 GM front engine, RWD, V8 cars. * Not for use in pollution-controlled vehicles or in dry sump applications. * The included LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for the engine; however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The included ECU is unlocked for further refinement at your local dyno shop if required. * BluePrint Engines recommends air intake kit BPPLS01013 to ensure correct MAF calculations and dyno calibration are maintained with the provided ECU / tuning.
Not Yet Reviewed
$16,049.00
LS Classic Series 14 in. classic crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an LS Classic Series vintage inspired 14 in. Classic air cleaner kit with chrome air cleaner, billet aluminum valley pan, and small block, big block or 409 Chevy-style valve covers of your choice. Once completely assembled, the Holley ECU is loaded with a start-up tune, and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * 14 in. Classic intake system with chrome air cleaner, GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Billet aluminum valley plate with oil fill tube and breather cap * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$23,621.95
—
$24,592.95
LS Classic Series Tri-Power crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange or left natural, and are assembled with an LS Classic Series vintage inspired Tri-Power intake kit with dual throttle bodies, chrome air cleaner, billet aluminum valley pan, and big block Chevy-style valve covers of your choice. These packages include a Holley Dominator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast-aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Dominator engine management system with O2 sensor and transmission control * Tri-Power intake system with chrome air cleaner, dual GM throttle bodies and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with integral breather * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$31,856.95
—
$32,597.95
LS Classic Series '57 Fuelie crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an LS Classic Series vintage inspired 1957 Fuelie style intake kit, billet aluminum valley pan, and small block style valve covers of your choice. These packages include a Holley Terminator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * LS Classic Series '57 Fuelie intake manifold system with GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with oil fill tube and breather cap * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$27,055.95
—
$27,374.95
LS Classic Series '62 Fuelie crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an LS Classic Series vintage inspired 1962 Fuelie style intake kit, billet aluminum valley pan, and small block style valve covers of your choice. These packages include a Holley Terminator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * LS Classic Series '62 Fuelie intake manifold system with GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with oil fill tube and breather cap * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$27,055.95
—
$27,374.95
LS Classic Series '63 Fuelie crate engines come with the complete line of LS Classic Series components pre-installed and ready to drop-in your classic ride. These crate engines start with a brand new, GM 495 hp "Hot Cam" LS3 right out of the box. They are then painted orange, or left natural, and are assembled with an LS Classic Series vintage inspired 1963 Fuelie style intake kit, billet aluminum valley pan, and small block style valve covers of your choice. These packages include a Holley Terminator engine management system and wiring harness with a GM electronic transmission controller. Once completely assembled, the Holley ECU is loaded with a start-up tune and the engines are run to check for leaks and oil pressure. Pricing varies depending on the engine's options. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast-roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engines include: * Fully assembled long block * Holley Terminator engine management system with O2 sensor and transmission control * LS Classic Series '63 Fuelie intake manifold system with GM throttle body and injectors * Oil pump, pick-up and Camaro style oil pan * Billet aluminum valley plate with oil fill tube and breather cap * Intake manifold, fuel injectors and throttle body * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube * High-performance rear dump exhaust manifolds * 14.000 in. automatic transmission flexplate
Not Yet Reviewed
$27,055.95
—
$27,374.95
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 427 c.i.d. 605 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without LS engine controller package with wiring harness and gas pedal. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 605 hp/565 lb.-ft. * Compression ratio: 11:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .624 intake/.624 exhaust lift -- 239 intake/255 exhaust duration at .050 in. -- 114-degree lobe separation angle -- 3-bolt cam * Forged steel crankshaft -- 4.125 in. stroke -- 6.125 in. connecting rods * Forged pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0685 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * #42 fuel injectors and returnless fuel rail * Coil packs * Spark plugs and wires * Valve covers * Timing cover
Not Yet Reviewed
$12,849.00
—
$17,049.00
BluePrint Engines is your premium choice in aftermarket, high-performance, drop-in LS crate engines, and their Pro Series is for those wanting maximum horsepower and durability. BluePrint Engines Pro Series Chevy LS 427 c.i.d. 625 hp EFI fully dressed long block crate engines offer any custom builder, hot rodder, or kit car builder an engine that has been fully Dyno tested, passed vigorous inspections, and is ready to power up your project. Blueprint's Pro Series 427 stroker GM LS3-style fuel injected engines are dressed with aluminum heads, forged pistons, forged crankshaft, a hydraulic roller cam, and a complete front accessory drive system with a polished or black finish. Additional features: * 6-bolt main block * Forged connecting rods * Cylinder head specs: -- 72cc chamber -- 2.165 in. intake/1.600 in. exhaust valves -- 259cc intake/102cc exhaust runners * Camshaft specs: -- .624 intake/.624 exhaust -- 239 intake/255 exhaust duration -- at .050—114-degree lobe separation * ECM supplied with calibration * 87mm LT5 DBW throttle body * Installed accessory drive with A/C, P/S, alternator, belts, and pulleys * LS3 intake manifold * 42# injectors and return-less fuel rail * Harmonic balancer * Valve covers, retro-fit oil pan, and timing cover * Coil packs * All sensors required for engine to run * Spark plug wires and wiring harness * Gas pedal * Dyno test results shipped with engine
Not Yet Reviewed
$17,949.00
Kraftwerks Chevrolet Camaro SS centrifugal supercharger kits provide instant throttle response and a progressive power curve that increases all the way to redline without the typical spiking or surging turbochargers are known for. This unique, more useable power curve results in reduced cylinder pressures, less strain on engine components, and increased reliability. The heart of the system is the Rotrex C38-91, the largest supercharger offered from Kraftwerks, capable of supporting 700 hp. The Rotrex superchargers also operate much cooler when compared to turbochargers and other supercharger systems, which reduces the engine's intake air temperature, as well as its risk of detonation. Each Camaro SS supercharger system is a comprehensive design and includes all necessary components to ensure safe, reliable operation. Standard-issue with each kit is a large, front-mount intercooler to help ensure low intake air temperatures for optimal performance. All necessary aluminum tubing, silicone couplers, and clamps are also included for easy installation. Proper air/fuel ratios are ensured with the included Grams Performance 52 lbs./hr. fuel injectors, and an optional engine management system. Convenient, plug-and-play fuel injector adapters are also included, making each kit a true bolt-on experience. Rotrex superchargers are renowned for their compact size, high adiabatic efficiency, low vibration, and quiet operation. Their unique traction drive technology is what makes all of this possible, which, unlike other superchargers, transmits power through frictional forces between its rolling elements. Each Rotrex unit features its own self-contained oiling system that remains independent of the engine. The Rotex units dual-action oil pump supplies traction fluid to the supercharger while the supplied cooler ensures proper fluid temperatures at all times. Features and benefits: * 600 hp/525 lbs.-ft. torque with OE headers and exhaust system * 750 hp/640 lbs.-ft. torque with aftermarket cam, headers, and E85 * Retain factory A/C and accessories * Rotrex C38-91 Supercharger with 85mm pulley (7 psi) * Grams performance 550cc/min. high impedance fuel injectors with plug-and-play connectors * Front mount intercooler (24 in. x 12 in. x 4 in.) * Aluminum intercooler piping * Oil cooler * High-quality CNC-machined brackets and idler pulley * High-quality fasteners and hardware * Recirculating bypass valve Note: Upgraded clutch recommended.
( 1 )
$5,454.32
—
$5,560.06
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 11 )
$8,195.00
—
$8,895.00
Edelbrock 416 c.i.d. E-Force supercharged long block crate engines for GM LS produce an astounding 720 hp and 695 ft.-lbs. of torque, on 91 octane pump gas! The 4.000 in. stroke and 4.065 in. bore push this LS3 out to a whopping 416 c.i.d. for incredible low-end torque, while the 9.5:1 compression ratio allows for safe and reliable supercharged performance. These E-Force long block crate engines come complete with essential supercharger kit components, and the superchargers feature driver side throttle body orientation for ease of intake routing, along with a Corvette belt offset for a compact installation. The engines include six quarts of Edelbrock performance SAE30 break-in oil for initial start-up. Additional features for these Edelbrock supercharged long blocks: * New GM aluminum LS3 block * Forged and balanced crankshaft * Forged H-beam connecting rods * Forged aluminum pistons * Hydraulic roller camshaft--215 degrees intake/247 degrees exhaust duration at 0.050 in. * Roller rocker arms--.629 in. intake/.656 in. exhaust valve lift * Edelbrock E-Force LS3 supercharger features Eaton TVS 2,300cc/rev rotors * Electric intercooler water pump * Intercooler plumbing * Intercooler recovery tank * Fuel rails * 60 lbs./hr. fuel injectors * Mass airflow sensor housing * Reusable air filter
Not Yet Reviewed
$30,022.95
—
$33,481.95
Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 3 )
$7,944.87
—
$8,843.87
BluePrint Engines Pro Series Chevy LS 376 c.i.d. 495 hp EFI truck long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared for those wanting maximum horsepower and durability. Features, specs, and contents: * 495 hp, 490 ft.-lb., compression ratio 10.7:1 * Cast Iron block with 6-bolt main * Nodular iron crankshaft * Connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal balanced rotating assembly * BluePrint aluminum cylinder heads --72cc chamber --2.165 in. intake/1.60 in. exhaust valves --259cc intake/102cc exhaust runners * Hydraulic roller cam --.553 intake/.553 exhaust lift --218 intake/224 exhaust duration @ .050 --113 degree lobe separation * Truck intake manifold * Fuel injectors and rail * Truck water pump * Truck harmonic balancer * GM muscle car swap oil pan (Customer may have to reuse existing pan and pickup) * Coil packs * Spark plugs and wires
Not Yet Reviewed
$10,949.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
