Availability
Showing In Stock Items. Show All 38 Items.
Looking for big LS engine power at an affordable price? Summit Racing™ remanufactured 5.3L LS long block crate engines are rated at 450 HP and 420 lbs.-ft. torque! This engine will give you the performance and drivability you have been searching for at a price you can afford. It can be a performance upgrade for 99-07 Chevy trucks, or an engine swap into your project vehicle. You will save time and money by leaving the machine-work and assembly to us. Just bolt on your accessories and drop it in. These engines are machined and assembled for us by the guys at ATK, and backed with a 2-year unlimited mile warranty for peace of mind. Technical specifications: * Horsepower: 450+ * Torque: 420+ * Block: Seasoned OE LM7/5.3L iron * Bore/stroke: 3.800-3.820 in. x 3.622 in. * Year range: 1999-2007 * Displacement: 323 C.I.D. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24-tooth reluctor wheel * Connecting Rods: OE GM forged powder metal 6.093 in. * Pistons: Hypereutectic flat top * Piston rings: Moly * Compression ratio: 10:1 compression * Camshaft: Summit Racing Pro LS Roller * Camshaft specifications: Lift- 550/550, Duration @.050- 222/232 * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: #799 or #243 OE aluminum 64cc 2.00 in./1.55 in. valves * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed
( 43 )
$3,849.99
Swap out your powerplant with one of these BluePrint Engines Pro Series Chevy LS 427 c.i.d. EFI drop-in base long block crate engines. They put down an impressive 625 hp and 565 lbs.-ft. of torque! Featuring a 30-month/50,000-mile warranty, they're the perfect choice for drivable and reliable high-end performance. Additionally, BluePrint Pro Series Chevy 427 c.i.d. dressed long block crate engine assemblies are manufactured under strict tolerances and provide outstanding, consistent results. They include a 58X Gen IV reluctor wheel and sensors. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239 intake/255 exhaust duration @ .050 in. lift, with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * GM LS intake manifold * Full roller rocker arms * ECM Controlled (not included - customer must reprogram)
Not Yet Reviewed
$12,949.00
BluePrint Engines Pro Series Chevy LS 427 c.i.d. carbureted retrofit dressed long block crate engines put down a whopping 625 hp and 550 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, these engines are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced to within 2 grams on a computerized balancer. BluePrint Pro Series long block crate engines are also dyno-tested and include the dyno sheets. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239/255 intake/exhaust duration at .050 in. lift with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * Aluminum single plane intake manifold * Full roller rocker arms * Carburetor * Ignition coil packs * Spark plug wires * Spark plugs * Harmonic balancer
( 2 )
$14,049.00
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$16,836.20
ATK High Performance GM 408 LQ4 Stroker 600 hp Stage 1 long block crate engines offer streetable horsepower producing big mid- to upper-end power with a noticeable idle. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 408 LQ4 Stroker 600 hp base engines consist of: * 6.0L iron LQ4 Gen III block * 4340 forged crankshaft * Forged H-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * OE rocker arms with trunnion upgrade * Timing set
Not Yet Reviewed
$8,997.99
ATK High Performance GM 365 LQ4 550 hp Stage 1 long block crate engines offer streetable horsepower producing big mid- to upper-end power with a noticeable idle. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 365 LQ4 550 hp base engines consist of: * 6.0L iron LQ4 Gen III block * ATK reground crankshaft * Forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * OE rocker arms with trunnion upgrade * Timing set
Not Yet Reviewed
$7,798.99
With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385
( 15 )
$4,189.99
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$10,641.52
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$12,803.20
Whether you're looking to build a reliable engine for towing and hauling or want the foundation for a high-performance build, the Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines are a great starting point and at a more affordable cost. These crate engines boast a number of features and benefits. Each engine is tested to meet or exceed GM's original equipment specifications. Additionally, every component is inspected and replaced if necessary. As a result, these remanufactured crate engines provide excellent value and dependability. Specific information (instructions): The replacement crate engines are built with two different designed oil pans. Differences are the first design oil pan has threaded hole for oil level sensor; the second design oil pan is without hole for the oil level sensor. Transfer oil pan from original engine or procure new, if required. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. --Refer to instruction sheet for general/detailed information and instructions on components that are required to be transferred from the original engine assembly or procured new. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required. The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required. The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers. For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness. Included Engine Content: * Engine Block * Pistons * Crankshaft * Connecting Rods * Cylinder Head * Camshaft * Front Cover * Housing, Cr/Shf Rear Oil Seal * Valve Cover/Cam Cover * Valve lifter Oil Manifold (VLOM) * Oil Pan
Not Yet Reviewed
$7,373.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp base long block crate engine is fitted with AFR heads. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
—
$5,556.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
On Sale
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$3,490.20
$3,315.50
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 41 )
$410.99
Roadster Shop SPEC chassis kits offer Roadster Shop quality at an affordable price point. The SPEC Series is an engineering-focused approach, using the latest in manufacturing technology, to build the lightest, strongest, and easiest-to-install complete chassis systems. These technologies have been used to streamline procedures resulting in lower cost and shorter lead times. The SPEC independent front suspension is engineered to deliver outstanding performance in a user friendly package. It features proprietary suspension geometry designed to provide the best balance of ride quality and performance in its class. Available as On-The-Shelf, pre-configured chassis or custom specifications to suit your needs. Features and benefits of Roadster Shop SPEC chassis kits include: * Full-chassis performance at a smaller component price * Unparalleled quality * Add the strength of a full frame with no floor modifications on most applications * CNC laser-cut, TIG-welded, and contoured "Laser Rails" frame rails * No kinks, bends, or stressed areas that are prone to flex like mandrel-bent tubing * Stronger, lighter, and more precise * CNC-located factory mounts built into the frame for easy, vehicle specific installation * Frame rails accommodate mini-tubs and wider wheels * Aggressive ride heights for the modern pro-touring look * Choice of coilover or air suspension for many applications * Air suspension chassis will lay the rockers on the ground (varies with tire size) * Truck rear frame rail kick ups engineered for minimal bed modifications while allowing rockers to lie on the ground * Crossmembers and chassis bracing allow 3 in. exhaust * Adjustable, drop-out transmission mounts (tunnel mods may be necessary for larger T-56 and 4L80 transmissions) * Vehicle specific body (cab and bed on trucks), bumper, and core support mounts * Single-adjustable billet coilovers * Power rack and pinion steering * Easy-to-adjust upper A-arm eccentric mounts for fast and accurate alignments * Wilwood Pro Spindles * Parallel 4-bar rear suspension * Ford 9 in. housing with 31 spline axles * Optional mounts, coilovers, sway bars, brake packages, and rear-end gearing available on custom-order chassis * 5 x 4.75 wheel bolt pattern * Frames are shipped as bare steel
( 14 )
$20,649.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
