Free Shipping on Orders Over $109 at Summit Racing

TMI Cruiser Series Low Back Bucket Seats

TMI Cruiser Series low back vinyl bucket seats are a complete replacement solution, with slider tracks and your choice of contrast stitching around the perimeter. No longer will you have to waste your time and money trying to repair worn-out factory seat frames and recover them with new foam and upholstery. Clean and classy, the Cruiser Collection universal seats come fully assembled and are 100 percent ready to bolt in with the appropriate mounting brackets (sold separately). Pro Series all-metal frames allow you to tilt or slide your seat. Tilting frames enable you to completely recline your seat, an option that was not always available in classic cars. Frames are wrapped with a heavy bolstered, high-density foam. No re-upholstering required, no hunting down old frames. Select your options and order a pair of bucket seats for your vehicle!

5.0 out of 5 stars ( 7 )

$1,068.00

TMI Pro-Series Sport Low Back Seats

TMI Pro-Series Sport low back seats are complete replacement bucket seats with slider tracks. The vinyl covers and stitching are each available in a variety of colors. Trying to repair worn-out factory seat frames with new foam and upholstery is time-consuming and expensive. Pro-Series reclining seats come fully assembled and ready to bolt in with the appropriate mounting brackets (sold separately). They will fit most any vehicle application. Order the shade you prefer. Details: * Contrast stitching around seat perimeter lets you perfectly accent your exterior and add sports style to the interior * All-metal frame allows you to tilt or slide your seat. Tilting frames let you completely recline * Frames are wrapped with a heavy bolstered high-density foam

4.67 out of 5 stars ( 9 )

$1,738.00

Summit Racing™ 3 Ton Steel Low Profile Floor Jacks

Our Summit Racing™ 3 ton steel low profile floor jacks can fit under vehicles that other jacks cannot. Their low profile construction can go as low as 3.3" and are built to withstand the demands of professional shop use. They feature a dual piston design with quick lift pump action, and are constructed from high-grade steel with a powder coated finish and ball bearing rear casters for superior mobility across your workshop or garage floor. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.

4.2 out of 5 stars ( 5 )

$179.99

BluePrint Engines Low Profile GM 383 C.I.D. 436 HP Dressed EFI Long Block Crate Engines

BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,399.00

TMI Pro-Classic Sport Low Back Seats

TMI Pro-Classic Sport low back seats offer traditional style with modern comfort and performance. No longer will you have to waste your time and money trying to repair worn out factory seat frames and recover them with new foam and upholstery. TMI Pro-Classic seats feature all-metal frames that tilt and slide, high-density foam, and durable upholstery with your color choice for stitching. They come fully assembled with slide tracks--ready to bolt in with the appropriate mounting brackets (sold separately).

Not Yet Reviewed

$1,579.00

TMI Sport R Pro-Series Low Back Seats

Add some comfort to the interior of your ride with a set of TMI Sport R Pro-Series low back seats. They do a great job of modernizing the original seats by adding a French seam stitched in a contrasting thread color around the perimeter. These seats feature the original grain style vinyl—and the result is a very modern looking seat which hints at classic factory style. TMI Sport R Pro-Series low back seats include sliders, but will require the use of vehicle-specific mounting brackets, sold separately.

Not Yet Reviewed

$1,738.00

—

$2,381.05

Rugged Ridge Standard Low Back Seats

Complete the restoration of your vintage Jeep with standard low back seats from Rugged Ridge. These low back seats retain the original equipment look that you're going for with the value and quality that you expect from Rugged Ridge. Their strong frames are powdercoated, filled with dense foam and sturdy springs, and then covered with automotive-grade vinyl for long-lasting comfort both on the road and off. These low-cost alternatives are easy to install using the original mounting hardware and bolts from the original seats. Maybe you're searching for a comfortable seat for your mud runner or daily driver without spending a lot of cash--just a simple quality seat that fits. Again, Rugged Ridge standard low back seats are the answer.

4.48 out of 5 stars ( 23 )

$239.99

Trail-Gear Rock Defense Low-Profile Bumpers

So, you like to play on the rocks? Trail-Gear Rock Defense low-profile bumpers protect your rig while you're having fun! They are built strong from 1020 DOM tubing, making them more dent-resistant, as well as relinquishing any worries of split seams. Plus, they offer sleek looks without the stinger, so you have performance and style! Rock Defense are true bolt-on bumpers that come raw and ready to customize with whatever surface treatment you choose. For your next play date, dress your rig in Trail-Gear signature armor--Rock Defense low-profile bumpers--and enjoy roughhousing on the rocks!

4.58 out of 5 stars ( 19 )

$799.99

TMI Pro-Series Low Back Seats

Sit comfortably and ride in style in a set of these TMI Pro-Series low back seats. They feature the original grain-style vinyl, with the addition of modern bolsters and a reclining seat back to make your ride as comfortable as possible. The result is a very modern looking seat that takes hints from classic styling. TMI Pro-Series low back seats include sliders, but require the use of vehicle-specific mounting brackets, sold separately.

4.3 out of 5 stars ( 23 )

$1,738.00

—

$1,904.47

Tin Soldier Racecars Low Prep 4-Link Kits

Tin Soldier Racecars Low Prep 4-link kits have taken what they have learned from some of the fastest stock suspension and 4-link small tire cars and combined them into one universal kit. The shorter upper bar allows the car to separate quickly on the launch like a stock suspension car, while keeping the versatility and strength of a traditional 4-link. It's truly the best of both worlds. The chassis brackets are laser cut from 1/4 in. thick plate and feature 1/2 in. staggered holes for all the adjustment you need whether on a radial or slick. The chassis brackets are notched on bottom for 1 5/8 in. tube and have through holes for a 1 5/8 in. tube on top (12 in. spread between). Each bracket has ProJack tabs incorporated into the bottom of the brackets. The axle housing brackets are designed around 275/315 or 28/29 in. tall tires, but still work well with larger tires. They are laser cut from 1/4 in. thick plate and feature 1/2 in. staggered holes for all the adjustment you need whether on a radial or slick. The axle housing brackets are made for 3.5 in. axle tubes and feature 6 in. of shock adjustment in 3/4 in. increments, while including ProJack tabs incorporated into the bottom of the brackets. Steel shock mounts are included. The bars are made from chromoly tube and feature 3/4 in. HD chromoly rod ends with zinc plated jam nuts. The bungs feature a hex adjuster and are constructed from chromoly. Tin Soldier Racecars Low Prep 4-link kits were originally designed for drag radial cars, but after much testing we have found that they really work well on no-prep to moderate prep on any small tire, slick, or radial. If you're looking to increase your traction and lower ETs these kits are for you.

Not Yet Reviewed

$954.99

Low Range Off-Road Suzuki Samurai Defiant Armor Rear Bumpers

The wait is over! The Suzuki Samurai Defiant Armor rear bumpers are the matching companion to Low Range Off-Road's versatile modular front bumper model and are now available in bare and powdercoated options. There are plenty of bumper options for the Samurai, but none have complimented the vehicle as well as the factory design. Inspired by factory body lines, the Defiant Armor rear bumper is as sleek as it is strong. The Defiant Armor rear bumpers are made from 1/4 in. CNC laser-cut steel and bent with a highly accurate CNC press brake. Like the front bumper, this rear bumper is a completely modular system that is shipped in sections and needs to be assembled. Integrated LED taillights are fully plug-and-play using factory plugs, no rewiring is needed. Compatible with body lifts up to 3 in. this rear bumper also includes an LED-friendly signal flasher to replace your old flasher relay. A 2 in. receiver is included but not rated for towing. Note: Rear license plate will need to be relocated for installation.

5.0 out of 5 stars ( 2 )

$795.50

—

$988.99

John Dow Low-Profile Gasoline Carrytanks

Easily transport and transfer gasoline wherever it's needed! John Dow low-profile carrytanks provide the convenience of a portable refueling station for farm, construction, recreation, industrial, and fleet markets. They're specifically designed to fit within the bed of a pickup truck and below the height of the truck bed sides. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the gasoline carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill level gauge * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides * Internal baffle prevents sloshing during transport IMPORTANT: This carrytank is for use with gasoline fuel only. DO NOT use with other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.

Not Yet Reviewed

$1,838.99

Low Range Off-Road Defiant Armor Rock Sliders

Keep your Samurai protected while looking sharp with the most innovative rocker guards on the market—Low Range Off-Road's Defiant Armor rock sliders! Rocker panels are exposed and vulnerable to damage by rocks when on the trail. Often even a small amount of damage to rocker panels will keep your doors from opening and closing smoothly. These steel, black painted rock sliders are available with no step, tube step, or a formed step. Full-color instructions and all necessary hardware (along with some tools required for assembly) are included. Order the design preferred for your vehicle.

5.0 out of 5 stars ( 2 )

$553.86

—

$633.21

Low Range Off-Road Sport Cage Kits

There is nothing more valuable in your Suzuki Samurai vehicle than its occupants. Low Range Off-Road's Sport cage kits were designed with your own families' safety in mind. Low Range Off-Road manufactures their Sport cages in-house, from .120 in. wall DOM steel tubing, and when properly welded, the cage is very difficult to crush and will serve most off-roader's needs. The rear cage bolts into the floor of the tub, thereby utilizing a large floor plate it spreads the load across a large area, forming a strong attachment point. Cages are shipped in prebent and coped tube segments, ready to be welded together. Installing a tube cage usually precludes the use of Samurai doors, Low Range Off-Road resolved this issue by using laser-cut steel plates on the front lower portion of our cage. With their unique design elements, the front doors shut correctly and do not ruin your nice paint job or your door panels. This also makes it easier to run your door straps. In addition, integrated into the design is a speaker grille that can be removed for speaker installation—and is also made from the same 3/16 in. thick steel as the mounting brackets, therefore, it helps protect speakers from damage. Hopefully you never need it, but if you do end up on your lid, be assured that you'll more than likely come away with only minor scratches to the cage paint. Choose the Sport cage kit that is better suited to your specific application needs—or order both front and rear for a complete cage kit. Available Options: * Front Samurai Sport Cage kit: Part No. SRC-SCF * Rear Samurai Sport Cage kit: Part No. SRC-SCR * Complete front and rear set: Part No. SRC-SC—both front and rear halves of the Low Range Off-Road Sport cage tie into the factory soft top roll bar * Installation on a factory tin top is possible, but requires the addition of a soft top roll bar (sold separately) Note: Some minor grinding and trimming may be required.

Not Yet Reviewed

$520.19

—

$954.89

Ranger 1 1/2 Ton Low Rider Super-Long Jacks

Ranger 1 1/2 ton Low Rider super-long jacks have a low profile and a long reach. With their amazing 34 in. long chassis and lowered height of 2 3/4 in., you will have no trouble reaching the factory-approved jacking points on most low ground-clearance vehicles. Their 3,000 lb. capacity is enhanced with an accurate direct-drive pump operation, making them the perfect combination of power and precision to accomplish much in your garage. Built to last from durable heavy steel, Ranger Low Rider super-long jacks offer a long lifting life that won't let you down. Other features include: * Swivel casters for easy mobility * Double-sealed hydraulics to prevent contamination * Safety overload system * Flanged side plates for increased strength

4.57 out of 5 stars ( 7 )

$575.00

Low Range Off-Road Align-Correct HD Crossover Steering Kits

Low Range Off-Road Align-Correct HD crossover steering kits will make your tires avoid slipping while following the path of a turn. The kits are offered in 3 levels: Full kit, Stage 1, and Stage 2 add-on kit. It's time to improve your steering with the strength and reliability of LROR Align-Correct HD crossover steering kits. Full kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * Heavy-duty tie rod, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 1 kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 2 add-on kits include: * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty tie rod, full 1/4 in. wall DOM tubing

Not Yet Reviewed

$433.25

All-Pro Off-Road Low-Profile Front Bumpers

All-Pro Off-Road's 4Runner low-profile front bumpers are designed to fulfill your demand for a durable, low-profile bumper that looks as good as it functions. The bumpers are available in steel and lightweight aluminum versions, including models with hoop options for multiple lighting configurations. Aftermarket bumpers are a great way to add additional protection and functionality to the front end of your vehicle. There are a ton of different bumpers out there, but if you want to keep the OEM look and perform minimal cutting, the All-Pro Off-Road low-profile front bumpers are an excellent option. Choose the All-Pro Off-Road low-profile front bumper model that is designed for your application needs. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel faceplate version that provides a solid mounting structure to vehicle frame * Available in bare and black powdercoat option * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a single-row (30 in.) light bar (lighting not included) * Optional center hoop is tall enough to offer grille protection, as well as providing additional light mount tabs for pod lights (lights not included) * Integrated recovery points * Heavy-duty winch mounting (on select bumper versions) * Compatible with most 8-12k winches with a remote mount solenoid box (winch not included) * Includes mounting hardware * Bolt-on installation (cutting of factory plastic bumper required for installation)

4.0 out of 5 stars ( 2 )

$399.99

—

$849.99

Corbeau Baja Low-Back Suspension Seats

Want a lower seat back? Corbeau Baja Low-Back suspension seats are lower back versions of their extremely popular SS suspension seats. Featuring advanced technology, these seats provide the safety of heavy-duty steel tubing and military suspension cords, along with the comfort of foam padding and beautifully styled stitching. Corbeau Baja Low-Back suspension seats offer safety and comfort for off-road enthusiasts; available in all vinyl and vinyl/cloth fabrics. Note: Baja Low-Back seats have four vertical tabs on the bottom of the seat allowing them to bolt to a roll cage. If you plan on bolting them to a Corbeau bracket or a flat mounting surface, you'll need to order a Corbeau adapter (sold separately) that bolts to the bottom of the seat making it a flat mounting surface and eliminating the vertical tabs.

5.0 out of 5 stars ( 4 )

$598.00

UWS Crossover Series Low-Profile Toolboxes

Add a sleek look to your work truck with UWS Crossover Series low-profile toolboxes. These rough and tough truck boxes work hard to keep you organized and efficient on the job site. Plus, they sit 2 in. lower on your bed rail. Crossover truck boxes are available in polished bright or powdercoated diamond tread aluminum or durable powdercoated steel to fit your work needs and your truck's style! All UWS toolboxes provide great looking security with fully foamed lids, rust-free stainless steel lock handles, a connecting rod enclosure, MicroSeal weatherstripping, and built-in tool trays and holders--depending on your chosen toolbox. They're also available in angled and notched models to accommodate special bed sizes and wheel wells.

4.2 out of 5 stars ( 5 )

$530.95

—

$815.95

Low Range Off-Road Defiant Armor Modular Front Bumpers

Low Range Off-Road Defiant Armor modular front bumpers are customizable, allowing you to choose the features you want to style and protect your Samurai. You choose the finish, the stinger or hoop styles, end lengths, and from a range of winch plates suitable for 0 to 3 in. body lift. The base winch mount of the bumper is made from 1/4 in. CNC laser-cut ASTM A36 steel and bent with a precision CNC press brake. The bumpers include a 2 in. receiver built into the winch mount that is compatible with many aftermarket winches. Make your choices to personalize the look and performance of your Samurai. Features: * Bare steel or durable black powdercoat finish * Stinger/hoop styles: -- Single bend -- Double bend -- Grille guard -- Grille guard with headlight guards * Side styles: -- Short ends -- Long ends -- Short ends with stubby ends * Sides come with LED light pods and new turn signals * Stubby ends increase width while keeping a low-profile * 1/4 in. thick winch mount plate with built-in 2 in. receiver * Center cap and sides made from 3/16 in. thick steel * Stingers are made from .120 in. wall x 1.75 in. O.D. DOM steel tubing * Plastic plugs to block off the unused bolt holes Note: You will need to splice the turn signals into the factory connectors.

5.0 out of 5 stars ( 1 )

$241.48

—

$931.43

On Sale

Rough Country Low-Profile Hard Tonneau Covers

Rough Country's hard low-profile bed covers are built for adventure. These tri-fold tonneau covers deliver a streamlined design that enhances your truck's off-road look while safeguarding your gear. Update your truck bed, secure your gear, and hit the trails with peace of mind. Rough Country's hard low-profile bed covers are perfect solutions for those who demand both style and functionality. Select the one designed for your truck. Features: * Flush, low-profile design with stylish matte black finish frame and aluminum panels * Tri-fold design allows quick access to cargo * Corrosion-resistant black powdercoated aluminum frame * Secure track and rail mounting system with drain tubes included * Nylon straps secure the cover in the 2/3 open position * Drive with the cover in the 2/3 open or closed position * Auto latching design secures on closure * Single cable pull for easy latch release and access * No-drill easy install and removal--all tools included * Nylon safety straps included * 5-year warranty

Not Yet Reviewed

$799.95

$649.95

—

$699.95

Thule Xsporter Pro Low Truck Racks

Thule Xsporter Pro Low truck racks takes your cargo capacity to a new level. These bed-level truck racks are perfect for carrying a rooftop tent, basket, or other equipment up to 220 lbs. Designed for compact and full-size pick-up trucks, the racks are made from durable, corrosion-resistant aluminum for years of use, and they sit below the cab of the truck for improved aerodynamics. Thule Xsporter Pro Low truck racks include two crossbars and four mounting feet. Additional features: * Universal mounting brackets require no cutting or drilling * Work with traditional bed rail and trucks equipped with bed-mounted track system * WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy * Includes the Thule One-Key System to lock the truck rack to the truck bed

5.0 out of 5 stars ( 1 )

$599.95

Low Range Off-Road Jimny Rear Bumpers

Complementing your Jimny front bumper should be Low Range Off-Road's Jimny rear bumper, offering the next level in aesthetics and performance. Thoughtfully designed to absorb impact, and protect your vehicle from damage both on and off the trail, these rear bumpers are made from 3/16 in. laser-cut steel. Featuring bolt-on installation, they require no welding and include a 2 in. receiver (not rated for towing) and taillights. LROR's Jimny rear bumpers are available in bare steel or with a durable black powdercoat finish. Choose your favorite.

Not Yet Reviewed

$458.85

—

$631.35

BendPak LR-4A Low Rise Lift Arms

BendPak LR-4A low rise lift arms are optional components increases your lifts capabilities, extending the pad reach of each ramp. Attaching easily to the low-rise lift ramp, the arms help you reach contact points that might be closer together on your frame. With an easy-slide design, the low-profile LR-4A arm kits move along the ramp rail giving you the power to position the lifting arm anywhere under your vehicle. BendPak kits include arms with polyurethane rubber blocks that are designed to grip the frame of your vehicle, holding it firmly in place, and will withstand heavy use. Safely increase the pad width of your scissor-lift ramps with BendPak LR-4A arm kits.

5.0 out of 5 stars ( 1 )

$1,050.00

646 Results Found For "low"