Availability
Showing In Stock Items. Show All 330 Items.
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 6 )
$372.37
—
$449.99
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$369.99
—
$682.99
K&N's all-new Snorkel System is built to deliver added protection and confidence when heading off-road and into extreme environments. Proudly designed and manufactured in the USA, this system helps ensure a consistent supply of cleaner air to your engine, especially in dusty, sandy, or debris-heavy conditions. By relocating the air inlet to the vehicle's highest point, K&N snorkels help preserve airflow, enhance induction tone, and reduce the risk of water ingestion* (Not rated for complete water submersion). The one-piece, roto-molded construction offers a durable, integrated appearance and is designed to fit either the factory, K&N or Airaid cold air intake system* (See vehicle-specific fitment details). K&N snorkels are engineered to enhance your vehicle's off-road capability and performance without compromising style.
Not Yet Reviewed
$589.99
Auto Metal Direct Spectra Steel OE replacement fuel tanks are part of the most extensive coverage in the aftermarket and are crafted from corrosion-resistant steel that is plated inside and out. Their strong, electrically welded seams are reinforced, and each tank is pressure-tested for leaks. Tank straps and sending units are sold separately. Features include: * Exact fit for easy installation * 100 percent factory-tested * OEM-approved ni-terne steel * Precision-engineered and tooled to meet or exceed OE specifications * Validated for fit, form, and function * Manufactured under ISO 9001-TS 16949 quality system * Transit-tested packaging * 3-year limited warranty * For use with gasoline containing up to 20 percent ethanol (E20) and diesel containing up to 5 percent biodiesel (B5)
( 136 )
$219.99
—
$239.99
QA1 Mopar K-members are direct bolt-ins for Chrysler, Dodge, and Plymouth vehicles. They are manufactured from quality materials and are engineered for maximizing strength. The K-members feature motor mount attachment points to accept factory and aftermarket motor mounts, and their tubular design also allows for increased header clearance.
( 28 )
$820.95
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 24 )
$529.95
—
$619.95
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
aFe Takeda exhaust systems are constructed of superior quality mandrel-bent 304 stainless steel and are designed to produce significant horsepower gains. They utilize single and dual, high-flow transverse mufflers. Some models include an X-pipe balance tube, which equalizes and evenly distributes exhaust pulses for increased flow and performance across the power band, while maintaining great sound. The finishing touches on these exhaust systems are their laser-etched, slash-cut polished 304 stainless steel tips. Many options are available, such as cat-back and rear axle-back styles; exit quantity and location; and tailpipe diameters. Order the kit designed for your vehicle application.
( 17 )
$689.85
—
$1,882.65
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
ATK High Performance Chevy Gen V LT1 416 short blocks are built for naturally aspirated engines, boost or nitrous. ATK starts with a new GM LT block and outfits it with a Manley 4340 forged crankshaft, H-beam rods with ARP2000 bolts, Manley 2618 forged pistons, and Total Seal CS AP ring package with steel top rings. These short blocks will have the factory piston squirters plugged. Engine Specifications: * Block: New GM LT1/LT4 * Bore/Stroke: 4.065 in. x 4.000 in. * Displacement (cu.in): 416 c.i.d. * Crankshaft: Manley 4340 forged 58-tooth reluctor wheel * Rods: Manley 4340 forged H-beam 6.125 in. ARP 2000 bolts * Pistons: Choice of 2618 forged +10cc or +20cc dished * Rings: Total Seal CS AP steel top ring with Napier 2nd ring set * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed Recommended components: * Balancer -- Internal balance * Flex plate / Flywheel -- Internal balance * Head gasket: .051 in. or per application * Oil pump: Factory Engine Info: * Oil: 5W30 non-synthetic for first 3,000 miles * Oil filter: Wix or K&N, per application
Not Yet Reviewed
$6,998.99
ATK High Performance Chevy 632 short blocks are based on dyno proven combinations built with name brand parts. Each short block is hand-built and inspected for precision tolerances. Rotating assemblies are balanced; and stroker builds are oversize of stock bore and stroke. Short blocks are shipped strapped on a wooden pallet crate. Engine Specifications: * Block: Dart Big M Sportsman 4-bolt main 2-piece rear main seal * Bore/Stroke: 4.600 in. x 4.750 in. * Displacement: 632CI * Crankshaft: Scat 4340 forged internally balanced * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: 2618 forged +3.4cc flat tops * Compression ratios: 112cc = 11.3:1 / 118cc = 10.8:1 / 121cc = 10.6:1 (can vary due to deck height/gasket thickness) * Rings: Plasmamoly * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer: Internal balance * Flexplate / Flywheel: Internal balance * Head gasket: .038 in. or per application Engine Info: * Oil: 10W30 Conventional / Non-Synthetic for first 3,000 miles * Oil filter: Wix or K&N per application * Head gaskets: .038 in. or per application
Not Yet Reviewed
$7,526.99
Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.
( 3 )
$2,849.95
—
$4,099.95
Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.
( 13 )
$2,199.95
—
$3,499.95
From the company that brought you the revered Red Top battery comes the new Optima Yellow Top H6 batteries. Designed to fit a wide range of vehicles with one part number, these batteries are the revolution for battery products. With Optima's tried and true AGM cells, the Yellow Top H6 battery will be the one to beat for years to come. Key features: * Deep-cycle and cranking power * Up to 3 times longer life * 15 times more vibration-resistant * Virtually spill proof * Mountable in virtually any position * Maintenance-free * Faster recharging * Optimal starting power * 300+ discharge/recharge cycles
( 43 )
$349.99
Odyssey Performance Series batteries are designed to handle the increased use of on board accessories in today's vehicles. They combine long service life, high reliability, and deep cycle capabilities. Performance batteries provide all the reliability of the Odyssey Extreme Series batteries, without the high cold cranking amps or reserve capacity many people may not require. The Performance Series batteries contain flat plates made of 99.99 percent pure lead--not lead alloy, like many conventional batteries.
( 62 )
$361.99
—
$398.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Evolution drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance on your car, truck, or SUV. They are precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gas, debris, and moisture to keep a clean friction contact patch on the rotor surface providing smooth, safe braking. Rotors without an integrated bearing are covered in silver zinc dichromate plating resists rust and corrosion. With the direct OE fit of PowerStop Evolution drilled and slotted rotors, upgrading the looks and stopping power of your vehicle has never been easier.
( 902 )
$192.36
—
$340.86
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 535 )
$1,706.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle.<br><br>PowerStop Z36 Truck and Tow brake upgrade kits are recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. They come with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. The low-dust Z36 Extreme ceramic brake pads are reinforced with carbon fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Evolution drilled, slotted, and zinc plated rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, you'll get an easy and affordable, bolt-on performance upgrade with PowerStop's Z36 Truck and Tow brake upgrade kits.<br><br><strong>Features and Benefits</strong><p><ul><li>This complete brake kit has been engineered to handle the added stress of towing, hauling, mountainous driving and lifted trucks</li><li>Proprietary <strong>Carbon-Fiber Ceramic Z36 brake pads</strong> enhance the strength of a typical ceramic brake pad compound to handle heavier loads</li><li><strong>Stainless-steel pad shims</strong> resist the increased temperatures common on heavy duty applications</li><li><strong>Low-dust braking</strong> validated through on-vehicle 3rd party tests in Los Angeles, showing on average <strong>30% less dust versus OE</strong></li><li><strong>Drilled & Slotted performance rotors</strong> provide maximum cooling</li><li><strong>Bolt-on upgrade</strong> for stock brakes, no modifications necessary</li><li>Includes <strong>stainless-steel installation hardware</strong> and <strong>high-temperature ceramic brake lubricant</strong></li><li><strong>Brake rotors, pads & hardware</strong> engineered to work together to increase the overall braking power on vehicles with heavier loads</li><li><strong>Rotors are zinc plated</strong> for maximum protection against rust</li><li>Buy with confidence from the <strong>originator & industry leader</strong> of brake kits</li></ul>
( 2750 )
$300.65
—
$744.82
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 3 )
$4,095.00
—
$4,495.00
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits come with everything you need--pads, rotors, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled and slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily driver the easy and affordable performance upgrade it deserves with PowerStop Z23 Evolution Sport brake upgrade kits.
( 3032 )
$244.40
—
$684.50
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z26 Street Warrior brake upgrade kits are recommended for high performance, high-horsepower muscle and modified cars. These kits come with everything you need for an easy installation, including pads, rotors and stainless steel hardware. The drilled and slotted rotors and carbon fiber ceramic pads combine to provide shorter stops under the most demanding conditions. PowerStop's Z26 Street Warrior kits are affordable bolt-on upgrades that deliver the braking power you need to rein in all those ponies, and with their low-dust and noise-free formula, you'll spend less time cleaning your wheels and more time enjoying what matters most--the drive.
( 754 )
$285.92
—
$340.63
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z17 Evolution Plus GEOMET coated rotor brake kits include brake pads, rotors, and stainless steel hardware; everything you need for an affordable, easy replacement brake kit for your daily-driven vehicle. The Z17 Evolution pads feature a low-dust formula, validated through on-vehicle 3rd party tests, to keep your wheels looking like new. These pads also have multi-layer rubberized shims that insulate noise for virtually silent braking. The rotors are treated with a thin layer of genuine GEOMET 360 coating to protect against rust and corrosion without diminishing braking performance and are manufactured to original equipment specifications. If you're looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with the Z17 Evolution Plus GEOMET brake kits.
( 144 )
$199.64
—
$952.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
