Availability
Showing In Stock Items. Show All 41 Items.
OTC 4-Ton capacity forklift jacks feature a low starting height of 2 5/8 in. and a maximum lifting height of 16 1/4 inches. The 2-position lift pad permits handling of all lift truck configurations with flat or edged surfaces. These forklift jacks feature high-quality seals, high-strength steel construction, and a 30 in. long handle, with stop, that makes for easy maneuverability around the shop or workspace. Quality and value are at the core of OTC products.
Not Yet Reviewed
$839.99
Leave the heavy work to Sunex Tools 3.5 ton service floor jacks—they're built and designed for continuous, dependable performance in any automotive service and repair shop. This upgraded power unit includes long-lasting, high performance seals and hydraulic fluid, while Rapid-Rise technology with dual pump pistons provides fast saddle rise to load. The low-profile, long-reach frame allows access to hard-to-reach lift points, and ball bearing rear swivel casters offer increased mobility. Additional features include: * Steel construction for strength, stability, and effortless maneuverability * Powdercoated finish for durability * 2-piece handle (50 in.) includes bumper pad to protect vehicle from damage * Minimum height: 3.85 in. * Maximum height: 21.2 in.
( 5 )
$410.99
Sunex Tools transmission jack fuel tank adapters help with the removal, installation, and moving of emptied automotive gas tanks. Designed for use on all under-hoist transmission jacks, these fuel tank adapters offer quick and easy installation to all ratcheting finger transmission jack saddles and include a universal adapter plate for all other saddles. The adapters feature foam support pads that can be adjusted for height, width, and length to fit any 40 gallon gas tank configuration. They also include a ground wire assembly to prevent static electric discharge on older metal tanks, and two 8 ft. tie-down straps to secure the tank to the adapter.
( 3 )
$355.99
K Tool aluminum service jacks are designed for cars and light-duty truck applications. These jacks have a lightweight aluminum design for convenient transport, yet they're strong enough to handle most jobs. If you're looking for a high-quality, lightweight jack for your garage, these aluminum jacks by K Tool will provide efficient service over the long haul. Additional features: * Strong, 3-ton capacity, but weighs only 58.4 lbs. * Dual pump system for quick lifting (7 strokes to top under no load) * Lifting range 3 3/4 in. up to 19 1/4 in. * "D" side handle for easy positioning * 2-piece handle for easy storage * Includes handle pad for protecting the vehicle
( 2 )
$435.99
Sunex Tools quick lifting floor jacks are heavy-duty service jacks designed for dependable, continuous performance in any automotive service and repair shop. These jacks feature a rapid-rise hydraulic power unit that includes dual pump pistons that raise the lift arm to the maximum height in six full incremental pump strokes. They're made with a strong chassis with upper and lower frame flanges to withstand twisting. Wide front wheels and ball bearing mounted rear caster wheels provide easy maneuverability and stability when jacking. Their angular positioned pump pistons provide maximum pump stroke effectiveness when the jacks are completely under a vehicle. Sunex Tools quick lifting floor jacks also feature pump piston dust shields and wiper seals to prevent contaminants from entering their hydraulic systems. Overload and bypass safety valves prevent the jacks from being used beyond their rated capacity and the overextension of the jack ram. Rubber saddle pads with a grooved surface accept vehicle panel rails to protect the vehicle frame from scratches and provide a sure grip lifting surface. A pump handle protector pad prevents damage to your under-car components and any other vehicles parked close to the jacks.
( 12 )
$364.99
BendPak's RJ6W is a 6,000-lb. capacity rolling bridge jack specifically designed for use with a full-sized scissor lift or four-post lift. The RJ6W rolling lift bridge jacks lift up to 6,000 lbs. for full wheel service capability and provide the ability and added versatility to raise the wheels off the runways of your car lift. The RJ6W rolling bridge comes standard with easy-roll wheels that fit onto the runway channels on standard four-post lift models and provides effortless gliding along the runways for easy positioning and adjustability. BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Durable rubber contact pads come standard with every rolling bridge jack. These pads adjust to engage the frame of your vehicle directly at the manufacturer-recommended lift point. Frame cradle pads (sold separately) are necessary for wide-bodied frames (e.g., trucks, SUVs). Additional product features and specs: * Stackable adapters maximize the arm reach on BendPak four-post rolling bridge jacks to accommodate virtually every vehicle on the market, so it's just a matter of knowing the weight of your vehicle and selecting a jack(s) with an appropriate lift capacity * High-pressure hydraulic power unit welded to the side of each four-post rolling bridge jack—commercial-grade air hydraulic pump requires 125 psi and 10-20 cfm and is activated when you press a convenient foot pedal attached to the unit—in seconds flat your vehicle will be lifted to the desired height! * Three lock levels—each four-post rolling bridge jack can be raised to three different heights, so whatever your needs are, you can fine-tune the height of your jack to meet them—the locks engage automatically as the jack scissor arms raise, and they release simultaneously when as the arms are lowered * Optional air-line kit available (sold separately) * Optional frame cradle pads are necessary for many wide-bodied frames (e.g., trucks, SUVs) and are sold separately
Not Yet Reviewed
$2,475.00
Tuxedo scissor-style rolling jacks feature a low-profile design, powdercoated finish, and smooth sliding operation. Designed with an adjustable width for compatibility with most vehicle lifts, their spring-loaded rollers provide positive jack rail contact. The hand pump means no air is needed, and the three safety lock positions help hold everything in place. Two pairs of extensions are included (1 1/2 in. and 5 in.), and their 4,500 lbs. capacity makes them versatile enough for most cars and some heavy-duty pickup trucks. When a run-of-the-mill jack isn't going to get the job done, get your vehicle lift components from a company known for their commercial-grade reliability and toughness by ordering Tuxedo rolling jacks. Product specifications include: * Lift height – 3.75 in. to 11.00 in. * Lift height with 1.50 in. extensions – 5.25 in. to 12.50 in. * Lift height with 5.00 in. extensions – 8.75 in. to 16.00 in. * Arm extension – 34.25 in. to 57.48 in. * Base adjustability – 33.90 in. to 49.60 in. * Pad height above runway – 3.75 in. * Net weight – 363 lbs.
Not Yet Reviewed
$2,052.99
OEM Automotive Tools low-profile floor jacks are built for efficiency and performance. Available in models capable of lifting 2 tons or 3 1/4 tons with minimal effort, they will be valuable additions to your garage or workshop for increased productivity. Both professional quality models are equipped with 360 degree rear swivel casters and padded handles, so you can quickly and easily position the jacks in any application, especially low-clearance vehicles, without scratching or denting vehicle while pumping jack. OEM Automotive Tools low-profile floor jacks meet ASME 2014 standards.
Not Yet Reviewed
$549.00
—
$599.00
OTC Tools' forklift jacks are designed with features like a low starting height, two-position lift pad, and a long handle for easy maneuverability, making them well-suited for various forklift configurations and workspace environments. For the right tools for the job, make OTC your #1 source. Key features include: * High-quality seals, chrome-plated internal components, and high-strength steel construction * Unique shape of primary saddle allows for handling of all lift truck configurations with flat or edged surfaces * Long handle stop makes for easy maneuverability * Complies with ASME-PALD * Secondary lifting surface feature * Stable base
Not Yet Reviewed
$1,996.99
OTC's 2-ton aluminum racing service jack packs combine their aluminum racing jack with jack stands for a ready-to-go package. The lightweight, 41 lb. jack includes side handles for easy transport and loading onto a truck for mobile service calls, while improved hydraulics and a wider track for the wheels make these OTC 2-ton service jacks durable and easy-to-use. Additional features: * 4 ft. padded lower handle protects rocker and door panels while providing maximum leverage to lift vehicles to a maximum of 18.5 in. * A rubber saddle protects vehicle undercarriage and prevents slipping * Saddle can be removed for lower profile to get under road-hugging vehicles as low as 3.4 in. * Meets ASME PASE-2019 safety standards * Jack stands have a 7 in. round base, flat-top style saddle, and pin lock with six slot adjustments
Not Yet Reviewed
$734.99
The Tuxedo RAJ-8K rolling air jacks are a high-quality, low-profile, air bag scissor type rolling bridge jack with pneumatic operation that includes exclusive telescoping universal roller body bracket assemblies. These scissor-style jacks are designed for either high mount or low mount applications. Dual spring-loaded precision roller bearings and guide wheels roll on top edge of jack rails for smooth maneuverability. Telescoping support arms offer air/hydraulic operation. These units also come standard with stackable pad and height adapters, dual air bags, adjustable pressure regulator and locking height position. Ships in durable wooden crate. Choose the model for your application needs. RAJ-8K-H low mount jack features: The low mount model incorporates adjustable height roller body brackets suitable for 4-Post lifts using low-profile jacks with medium-to-high mount jack rails, to provide enough clearances for proper operation when lift is fully lowered. RAJ-8K-H high mount jack features: The high mount model incorporates adjustable height roller body brackets suitable for 4-Post lifts using low-profile jacks with low-mount jack rails and high-profile runways to provide enough clearance for proper operation and from touching the ground when fully lowered.
Not Yet Reviewed
$2,502.99
The Ranger 2 1/2 ton super-duty Series jacks are a true heavy lifter! Their impressive lift capacity doubles down with a super-low 3 in. collapsed pad height for optimum user convenience and lifting power. With its 5,000-lb. lifting capacity, durable heavy steel construction, emergency overload system for safety and simple twist control for adjustable lowering, Ranger's 2.5 ton floor jack is ideal for any car shop. Extremely lightweight, this jack goes anywhere and lifts almost every low-stance vehicle on the market. Nothing really competes with its speed, safety, and efficiency. In fact, this model is so easy to use, it quickly became a favorite among drivers of exotic vehicles that require special care during maintenance and repairs. Specifications and features: * Professional model designed for heavy use with lifting capacity up to 5,000-lbs. * Heavy steel construction for maximum durability * Double-sealed hydraulics for longer service life * Sealed hydraulic unit prevents contamination * Safety overload system * Flanged side plates for increased strength * 3 in. low-profile design is ideal for low-chassis sports vehicles and race cars, but it also services light trucks and SUVs * Swivel casters for easy mobility * Simple twist control for adjustable lowering * Universal-joint pressure release system * Roller-cam, dual plunger pump assembly
Not Yet Reviewed
$370.00
Tuxedo scissor-style sliding jacks feature a low-profile design, powdercoated finish, and smooth sliding operation. Designed with an adjustable width for compatibility with most vehicle lifts, their rollers provide positive jack rail contact. The hand pump means no air is needed, and the three safety lock positions help hold everything in place. Two pairs of extensions are included (1 1/2 in. and 5 in.), and their 3,500 lbs. capacity makes them versatile enough for most cars and some light-duty pickup trucks. When a run-of-the-mill jack isn't going to get the job done, get your vehicle lift components from a company known for their commercial-grade reliability and toughness by ordering Tuxedo sliding jacks. Product specifications include: * Lift height – 3.50 in. to 11.40 in. * Lift height with 1.50 in. extensions – 5.00 in. to 12.90 in. * Lift height with 5.00 in. extensions – 8.50 in. to 16.40 in. * Arm extension – 33.90 in. to 59.80 in. * Base adjustability – 30.90 in. to 45.70 in. * Pad height above runway – 3.50 in. * Net weight – 307 lbs.
Not Yet Reviewed
$1,699.99
BendPak's RBJ25000 rolling bridge jacks offer 25,000 lbs. of muscle meant to service some of the biggest commercial fleets on earth. This jack can be used on your HDS40 four-post truck lift to perform wheel service on almost any heavy-duty vehicle on wheels. The RBJ25000 rolling bridge jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS-40 four-post lift, you can safely perform wheel service with the RBJ-25000 rolling bridge jack. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axel and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. Additional product features: * 25,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Lift to three lock positions for your convenience—the higher the jack, the more undercarriage clearance you get on your HDS-40 four-post lift * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,595.00
BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)
Not Yet Reviewed
$4,495.00
The BendPak RBJ15000 rolling bridge jacks are made for the HDS-35 four-post lift—which is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can't get to the wheels. BendPak rolling bridge jacks open the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak's exclusive, optional airline kit. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy! Additional product features: * 15,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Three safety-lock positions—raise your jack to three different heights—whatever is most comfortable for you! * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,895.00
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$6,395.00
BendPak RJ45W rolling bridge jacks are compatible with BendPak HD-7 Series, HD-9 Series and GP-9 Series four-post lifts, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The BendPak RJ45W lift bridge jacks exclusive telescoping design accommodates BendPak 4-post lifts with adjustable-width runways, precision sliders, and rollers to enable you to position the hydraulic jacks exactly where you need them. Additional products features: * 4,500 lb. lifting capacity * Easy-roll wheels * Rubber contact pads * Stackable adapters to provide added clearance when needed * High-pressure hydraulic power unit
Not Yet Reviewed
$2,450.00
BendPak RJ7W rolling lift bridge jacks are made for an HDS-14 Series four-post lift, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The RJ7W rolling lift bridge jacks features an exclusive telescoping design to accommodate the BendPak HDS-14 Series 4-post lift with adjustable-width runways, precision sliders, and rollers, enabling you to position the hydraulic jacks exactly where you need them. Additional product features: * 7,000-lb. lifting capacity * Easy-roll wheels * Three safety-lock positions * Stackable adapters to provide added clearance when needed * Rubber contact pads * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$2,595.00
Solutions to make RVing safe and easy, Ultra-Fab Products Ultra Deluxe 5th wheel landing gear is designed and intended for use on all 5th wheel trailers to lift and level, with just a flip of the switch. Two powerful 12 V motors eliminate the need for hand-cranking, while built in clutch ratchets prevent damage to the jacks. The Ultra Deluxe 5th wheel landing gear allows for independent positioning of foot pads and works especially well on uneven surfaces, delivering a secure and more enjoyable RVing experience. Features and benefits: * Purpose: Raise and lower the front of any fifth wheel with ease. As simple as flipping a switch to raise or lower fifth wheel. No straining required * Easy to use: Convenient spots to weld to trailer available on 3-side of the landing gear. Includes all mounting brackets and hardware needed for installation * Capacity: Only landing gear with 12,000 lb. capacity (6,000 lb. per leg) for both lifting & supporting (exclusive to Ultra-Fab) * Durable: A built-in clutch prevents legs from extending beyond their ability * Easy to operate: No more hand cranking, just flip the waterproof switch to operate the Landing Gear. No more looking for rocks to shove under one of the landing gear feet. Legs operate independently, so each one can reach the ground for full support, even on uneven ground. Designed to reduce the risk of frame twisting * Super Stable: Huge 8 in. x 5 in. footpad is perfect for distributing the weight proportionally. Designed to prevent sinking and tilting * Convenient: Increased headroom available as there is no cross-shaft to get in the way * Specifications: Total Travel is 36" (21" screw travel and 17" drop leg travel). Overall length is 36 1/2 in (includes motor). Bracket height is 36 in. retracted and 74 in. extended. The frame clamp width is 2 in. Screw travels at 4 in. per minute
Not Yet Reviewed
$1,151.93
iDEAL Equipment EV/Hybrid lift tables are portable, high-rise commercial and industrial grade tables incorporating a "multi-adjustable" EV platform primarily designed to assist with controlled lifting and lowering tasks to safely remove, replace, or service heavy vehicle components, especially for electric and hybrid vehicles, such as EV battery packs, motors, powertrain assemblies, or other similar heavy components. Available as a 2,500 lb. air-hydraulic or a 3,300 lb. 12 VDC battery-powered electric-hydraulic style table, both are equipped with a durable EV insulated platform that includes a multi-directional "sliding" platform with latch clamps, along with tilt and height adjustments. Each one also has their own unique features that combined provide maximum strength, stability, and safety for added efficiency and convenience. Select the iDEAL Equipment EV/Hybrid lift table model you prefer. Additional features and notes: The LT-EV2500AH-X incorporates an exclusive fully operational pneumatic hand operated stainless steel control panel with integrated air gauge and water separator. Also included are high-quality locking swivel and directional poly casters, tool tray, removable hand bar, double lift scissors, HD air-hydraulic pump and hydraulic cylinder, and four rubber pads. The LT-EV3300DC-X incorporates a fully operational remote hand controller and control box panel buttons for dual-control function operations, and includes a high-quality deep-cycle 12 VDC sealed battery, integrated battery charger, and 12 VDC auxiliary outlet port. This table comes standard with a pallet jack dolly with poly casters, leg support stands, front locking swivel and directional poly casters, utility/tool tray, double lift scissors, powerful DC electric motor, dual hydraulic cylinders, and four rubber pads.
Not Yet Reviewed
$6,380.00
You don't need a 2-post lift to perform wheel service at a comfortable height. Instead, turn your 4-post car lift into an on-the-car wheel service dynamo with a BendPak bridge jack! The scissor-style jacks offer peerless speed and versatility, so you can easily raise two or four wheels off the runways for brake jobs and suspension work. Their exclusive telescoping chassis design accommodates BendPak 4-post lifts with adjustable-width runways, precision sliders, and rollers, enabling you to position the hydraulic jacks exactly where you need them. These air/hydraulic 4-post bridge jacks come complete with three safety locking positions and stackable pad adapters for multi-vehicle versatility.
Not Yet Reviewed
$2,450.00
The Tuxedo LR-26-PAD low-rise pad lifts provide quick and easy lifting. This lift model raises to a comfortable working height for technicians to perform most brake and tire work and are just as helpful for body work and other detailing. Rubber lift blocks are also included that can be placed on the lift pad surface to meet up with the auto frame contact points. The electric motor powers a hydraulic pump, with lines running to the lift structure hydraulic cylinder. You don't have to sacrifice quality for an affordable garage lift, thanks to Tuxedo LR-26-PAD low-rise pad lifts. Key features: * Lifting capacity: up to 6,000 lbs. * Dolly mounted power unit * 115 V -15 amp -1ph motor—raises car to full lifting height * Lifting height 26 in. without lift blocks, 30 inches with rubber lift block adapters * Automatic safety lock—automatically engages * Rubber riser spacer blocks included to get at difficult to reach vehicle frame jacking contact points * Excellent for tire and wheel service * Optional MR6K-38-SUV adapter kit is available for frame lifting (sold separately)
Not Yet Reviewed
$3,236.99
iDEAL Equipment commercial low-rise pad lifts are designed for cars, SUVs, vans, and trucks. The 10,000 lb. lift includes the latest in design and safety features, including twin hydraulic cylinders, three locking height positions with dual latch releases, durable rubber contact pads, protective hose covers, and outer drive-over fixed platform frame This allows for wheel service repairs for a wider range of vehicles, including uni-body vehicles using the included multi-height adapters and rubber pads. The versatility of the pad lift design allows vehicles to be driven-on the pad lift in either direction, while also having the ability to position the hose and power unit to either side of the pad lift, allowing for the best fit in a shop or garage. Easy lift operation is provided with a high-quality electric/hydraulic 115 V DURO power unit, mounted to a pedestal post combined with dual point manual lock release.
Not Yet Reviewed
$4,590.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
