Free Shipping on Orders Over $109 at Summit Racing

FiTech Go EFI Fuel Tank Kits

FiTech has partnered with TANKS Inc. to make your EFI upgrade even easier with a comprehensive line of new FiTech Go EFI fuel tank kits. Fuel injection demands higher pressure from an electric fuel pump, and the best place to mount a pump is in the gas tank. FiTech's in-tank module is supplied with a 340 lph fuel pump to support up to 800 hp. The fuel pumps bolt directly into the tank's recessed mount, providing a modern EFI solution for hot rods, classic trucks and muscle cars. FiTech Go EFI fuel tank kits also include the following: * Direct-fit tanks feature internal baffles for constant fuel delivery * In-tank pump module secures the supplied 340 lph pump in the tank * -6 AN inlet/outlet that provides leak-free fuel line connections * Recessed sending unit and pump mount that provides added clearance

4.12 out of 5 stars ( 25 )

$638.00

—

$681.00

ATK High Performance GM LM7 5.3L with AFR Heads 500 HP Crate Engines with EFI

ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced

Not Yet Reviewed

$8,899.99

ATK High Performance Chevy LQ4 6.0L 460 HP Long Block Crate Engines

ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor

4.4 out of 5 stars ( 10 )

$5,049.99

—

$7,898.99

ATK High Performance GM 350 390 HP Stage 3 Long Block Crate Engines with EFI

ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune

Not Yet Reviewed

$5,398.99

ATK High Performance Chrysler 360 Magnum 320 HP Stage 3 Long Block Crate Engines with EFI

ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune

5.0 out of 5 stars ( 2 )

$5,898.99

ATK High Performance Ford 302 375 HP Stage 3 Long Block Crate Engines with EFIes with EFI

ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel

Not Yet Reviewed

$7,284.99

Nokian One Tires

Nokian One tires deliver peace of mind in every moment. These tires are the "One" for safety, durability, and sustainability, making them ideal for North American drivers. With a comfort base compound, strong sidewalls, silent sidewall technology, and much more, Nokian One tires offer the performance needed—and wanted--for your vehicle. Select the proper size. Features: * Focused improvements in wet braking and wet handling * Even wear thanks to a symmetrical, non-directional tread pattern * Zigzag siping and block supports for grip and handling * High-volume water pockets built to navigate rainy roads * Silent groove design with polished grooves * The fi¬rst Nokian Tires passenger product with Aramid sidewall technology * Pothole Protection warranty * Toughness and longevity via a high-silica compound and strong shoulder construction * Low rolling resistance * The most comfortable all-season passenger tire Nokian Tires has introduced * Reductions in exterior and interior noise * Driving Safety Indicator that tracks tire wear

Not Yet Reviewed

$208.99

—

$273.99

Summit Bucks

Extreme Metal Products Extreme Rear Bumpers

Whether bouncing off trees, rocks, or other UTVs, Extreme Metal Products Extreme rear bumpers are ready. These 11-gauge units are laser-cut and CNC-formed from American steel, while their mounting brackets use heavy-duty 3/16 in. thick American steel for incredible hold. They're welded, ground smooth, and powdercoated texture black for rust and corrosion protection. Their brackets mount in the same location as stock units for easy fitment. Guard your rig with the strength, style, and value of Extreme Metal Products Extreme rear bumpers.

4.43 out of 5 stars ( 7 )

$219.99

—

$249.99

Quadboss UTV Roofs

Put a barrier between you and the elements with a Quadboss cab top-style roof for your powersports machine. Order the Quadboss roof model that's specific to your utility vehicle application—and get ready to enjoy the great outdoors! Features of Quadboss roofs include: * Vehicle-specific roofs (Honda®, Polaris, Kawasaki, Yamaha) * Provides strong topside protection from the sun, rain, and dirt * Made from durable polyethylene material with UV stabilizers * Molded-in drains allow water to run off * Molded-in trays allow for extra storage on some models

5.0 out of 5 stars ( 2 )

$217.27

Summit Bucks

Clearance

Extreme Metal Products Quick-Connect Full Windshields

Extreme Metal Products Quick-Connect full windshields are the way to go for deflecting rain and wind from your UTV cab. They are made from 3/16 in. hard coated MR-10 Lexan polycarbonate. This durable construction makes these windshields scratch-resistant and virtually unbreakable, with a fit that contours to the cage of your UTV. They install easily with custom fabricated brackets and thumbscrews and can be quickly removed without tools. Extreme Metal Products Quick-Connect full windshields are DOT-rated and stamp-etched.

3.91 out of 5 stars ( 11 )

$203.99

$142.50

MasterCraft PWR Sport Seats

MasterCraft PWR Sport seats will endure the rigors and versatility of the UTV market, making them the ideal interior upgrade for your side-by-side. These seats are direct bolt-in replacements, seamlessly adapting to the factory OEM mounts, while retaining a full-size seat profile. PWR Sport seats have many features to make you comfortable and provide safety off-road, as well as to add great long-lasting looks to your UTV. The seats are upholstered with high-performance UV-treated Marquesa fabric that's available in several solid and 2-tone colors. PWR Sport seats feature: * Direct bolt-in replacement for the Yamaha Rhino and Kawasaki Teryx * Laser-notched tube construction * Three-quarter rise bolster with 7 in. of hip containment to keep you in your seat * High-resiliency foam for exceptional energy attenuation and comfort * Anti-sub and lap seat belt slots * Integrated shoulder harness guide loops to secure harness bar restraints in place * Tested and validated to comply with applicable FMVSS * Available with fixed headrest or no headrest

5.0 out of 5 stars ( 1 )

$379.95

Seizmik UV-Resistant Full Windshields

Seizmik UV-resistant full windshields feature an anti-vibration mounting system which utilizes special grommets sandwiched between nylon clamps to isolate vibrations away from the mounted windshield. The no drill installation makes installing Seizmik windshields easy and quick. The 0.220 in. thick polycarbonate shield is tough and comes coated with a UV-resistant coating for a long life.

Not Yet Reviewed

$305.89

Rough Country Full-Size Vented Windshields

Protect the occupants of your UTV from off-road hazards, such as rocks, branches, and other debris, while allowing cool air to flow through with Rough Country's vented scratch-resistant windshields. Constructed from high-quality polycarbonate, they offer a clear visual of the trail ahead, allow for a much more comfortable outing, and each windshield is precision cut with round vents across the bottom that easily rotate 360 degrees to allow for the desired direction of airflow. The polycarbonate material provides an ideal combination of clarity, flexibility, and durability, plus it is enhanced by a secondary AR2 hard-coating process, giving the windshields a hardened, scratch-resistant barrier that also provides the additional benefit of UV protection. Rough Country full-size vented windshields are installed with a simple strap-on process, that can be easily accomplished within 15 to 30 minutes, so you'll be ready to hit the trails in no time. Additional features: * Contoured design * Rubber seal for a precise fit * Works with factory or aftermarket roofs * Easy to install

Not Yet Reviewed

$219.95

—

$259.95

Summit Bucks

Extreme Metal Products UTV Hard Tops

Extreme Metal Products UTV hard tops are manufactured from tough and rugged material. They are proven to be very durable under all conditions. These tops also extend all the way to the sides of your cage, providing enough protection for your shoulders! Extreme Metal Products UTV hard tops include rubber coated mounting straps for easy installation.

4.5 out of 5 stars ( 58 )

$259.99

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

ATK High Performance GM 350 Vortec 315 HP Stage 1 Long Block Crate Engines

Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.71 out of 5 stars ( 7 )

$2,988.99

ATK High Performance GM 350 TBI 290 HP Stage 1 Long Block Crate Engines

Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.0 out of 5 stars ( 6 )

$3,034.99

ATK High Performance Ford 302 300 HP Stage 2 Long Block Crate Engines

Replace your old, tired mill with ATK High Performance Ford 302 300 hp Stage 2 long block crate engines to give your old ride new life. These engines are designed to be perfect replacements for your old 302, but with a bit more kick. The upgraded engines produce 300 hp and 336 ft.-lbs., while still maintaining a smooth idle and great driving manner. These mills are perfect for daily drivers or mild-mannered street rods. Ford 302 300 hp Stage 2 long block crate engines feature: * Handpicked, remanufactured blocks * OE cast iron cylinder heads * Intake manifold * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .498 int./.498 exh. * Cam duration @ 0.50- 219 int./219 exh. * 9.0:1 compression * Distributor * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube * Water pump * Front damper and flexplate

5.0 out of 5 stars ( 4 )

$4,210.99

Clearance

ATK High Performance Chrysler 5.7 Gen III Hemi 400 HP Long Block Crate Engines

ATK High Performance Chrysler 5.7 Gen III Hemi 400 hp long block crate engines were built in a team effort with Comp Cams. Utilizing ATK remanufactured GEN III 5.7L Hemi engines; they upgraded the camshaft, springs, and pushrods to produce reliable 400+ hp. Features typically include: * Seasoned OE Gen III Hemi block * OE reground crankshaft * OE reconditioned connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * OE shaft mount rocker arms

3.6 out of 5 stars ( 5 )

$4,798.99

$3,999.50

—

$4,798.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.81 out of 5 stars ( 72 )

$1,480.50

—

$8,139.99

Centerforce Dual Friction Clutch Kits

Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.

4.66 out of 5 stars ( 308 )

$1,049.95

—

$1,679.95

Centerforce SST Clutch and Flywheel Kits

Introducing the new Centerforce SST (Solid Street Twin) clutch and flywheel kits—engineered and developed for vehicles producing 400 to 925 lbs.-ft. of torque. The SST discs utilize solid hubs to reduce the rotational weight on the input shaft for quick clean shifts. The discs in the assembly are built using high-quality friction materials, for smooth engagement and longevity. These SST clutch and flywheel kits feature a lightened billet steel flywheel, providing low inertia resulting in quicker rpm and the Centerforce anti-rattle system to reduce floater rattle/noise. In addition, no complicated setup or adjustments are required, just bolt in the clutch and flywheel kit application you need—and "get a grip"! For streetcar enthusiasts looking for a high-quality Twin disc clutch system, the Centerforce SST clutch and flywheel kits are an economical choice. Key features and benefits: * Positive drive floater * Easy pedal * Precision balanced * Smooth engagement * Spec card included * ARP hardware * Solid hub for light weight and quick shifts * Simple install

4.57 out of 5 stars ( 7 )

$1,312.95

—

$1,396.95

Centerforce II Clutch Kits

Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.

4.67 out of 5 stars ( 48 )

$1,060.95

—

$1,616.95

MBRP Installer Series Exhaust Systems

The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.

4.53 out of 5 stars ( 406 )

$539.99

—

$759.99

68 Results Found For "fi"