Availability
These Summit Racing™ dual feed fuel lines are a great addition to any fuel system. The pre-assembled fuel lines clean up your engine compartment and properly deliver fuel to your carburetor. Available in multiple sizes and styles to suit your needs.
( 448 )
$60.99
—
$73.99
Summit Racing™ fuel lines are a great addition to any fuel system. They include all necessary hardware for an easy installation on your Edelbrock, Holley, Carter, or Summit carburetor. Available in multiple styles to suit your needs.
( 261 )
$53.99
—
$54.99
Elevate your pet's feeding experience! The WeatherTech Double High Pet Feeding System was designed from the ground up to provide your pet with the safest and most comfortable eating experience available. The two ergonomically designed bowls ensure your pet won't have to strain their neck and back to get every tasty morsel of food and every refreshing drop of water. Made in the USA from ultra-tough stainless steel, these bowls are the only pet bowls certified by the NSF to be free of lead, radiation, mercury, cadmium, and other toxins. The heavy-duty stand and mat are made using only the highest quality, FDA-approved, non-toxic plastics. The custom designed mat features an elevated interior that prevents spills and messes from pooling underneath the system's stand and bowls. At the same time, the raised outer barrier keeps your pet's mealtime messes contained on its easy-to-clean surface—instead of all over your floor. Speaking of floors, the soft mat creates traction on a wide array of surfaces. This ensures that the entire feeding system stays anchored in one place, and keeps your floors scuff mark-free. The WeatherTech Pet Elevated Stand features a sloping surface that directs any food or water spills right onto the mat below. The stand also locks securely in place using the raised positioning ribs molded into the mat, so the stand won't move, shift, or tumble over during mealtime. The WeatherTech Double High Pet Feeding System was also designed to be easy to clean and maintained. The mat and stand can be simply wiped off with a damp towel or rag for quick clean-ups—and for those tougher messes, every piece of the feeding system is 100 percent dishwasher safe! Choose the stand height and color you prefer for your order.
( 1 )
$65.95
—
$107.95
Elevate your pet's feeding experience! The WeatherTech Single High Pet Feeding System was designed from the ground up to provide your pet with the safest and most comfortable eating experience available. The ergonomically designed bowl ensures that your pets won't have to strain their neck and back to get every tasty morsel of food and every refreshing drop of water. Made in the USA from ultra-tough stainless steel, this is the only pet bowl certified by the NSF to be free of lead, radiation, mercury, cadmium, and other toxins. The heavy-duty stand and mat are made using only the highest quality, FDA-approved, non-toxic plastics. This mat features a custom designed raised interior that prevents spilled food and water from pooling underneath your stand and pet bowl. At the same time, the mat's raised outer barrier keeps your pet's mealtime messes contained on its easy-to-clean surface—instead of all over your floor. Speaking of floors, the soft mat creates traction on a wide array of surfaces. This anchors the entire pet feeding system in one place, and keeps your floors free of scuff marks. The WeatherTech Pet Elevated Stand features a sloping surface that directs any food or water spills right onto the mat below. The stand also locks securely in place using the raised positioning ribs molded into the mat, so the stand won't move, shift, or tumble over during mealtime. The WeatherTech Single High Pet Feeding System was also designed to be easy to clean and maintained. The mat and stand can be simply wiped off with a damp towel or rag for quick clean-ups—and for those tougher messes, every piece of the feeding system is 100 percent dishwasher safe! Choose the stand height and color you prefer for your order.
( 1 )
$47.50
—
$104.95
The WeatherTech Single Low Pet Feeding System was designed to provide your pets with the safest and most comfortable eating experience possible. The ergonomically designed bowl ensures that your pets won't have to strain their neck and back to get every tasty morsel of food and every refreshing drop of water. Made in the USA from the highest-quality stainless steel, this is the only pet bowl certified by the NSF to be free of lead, radiation, mercury, cadmium, and other toxins. The Single Low Pet Feeding System combines the stand and mat into one functional and low-maintenance piece that's made using only premium, FDA-approved, non-toxic plastics. The sloped sides of the stand direct any spills right down onto the mat below; while the raised outer lip of the mat works to catch and contain any mealtime messes, keeping your floors clean. Speaking of floors, the soft mat material creates traction on a wide array of surfaces. This ensures that the entire feeding system stays anchored in one place, and keeps your floors scuff mark-free. Portable and compact, the feeding system easily fits into any room in your house, and is perfect to bring outside on your patio or on the go! The WeatherTech Single Low Pet Feeding System was also designed to be easy to clean. The mat and stand can be simply wiped off with a damp towel or rag for quick clean-ups—and for those tougher messes, every piece of the feeding system is 100 percent dishwasher safe! Choose the bowl size and stand color you prefer for your order.
Not Yet Reviewed
$39.95
—
$100.95
The WeatherTech Double Low Pet Feeding System was designed to provide your pet with the safest and most comfortable eating experience available. The two ergonomically designed bowls ensure that your pets won't have to strain their neck and back to get every tasty morsel of food and every refreshing drop of water. Made in the USA from ultra-tough stainless steel, these are the only pet bowls certified by the NSF to be free of lead, radiation, mercury, cadmium, and other toxins. The heavy-duty integrated stand and mat are made using only the highest quality, FDA-approved, non-toxic plastics. The Double Low Feeding System combines the stand and mat into one functional and low-maintenance piece that will make both you and your pet happy. The sloped sides of the stand direct any spills right down onto the mat below; while the raised outer lip of the mat works to catch and contain any mealtime messes, keeping your floors clean. Speaking of floors, the soft mat creates traction on a wide array of surfaces. This ensures that the entire feeding system stays anchored in one place, and keeps your floors scuff mark-free. Portable and compact, the feeding system easily fits into any room in your house, and is perfect to bring outside on your patio or on the go! The WeatherTech Double Low Pet Feeding System was also designed to be easy to clean. The mat and stand can be simply wiped off with a damp towel or rag for quick clean-ups—and for those tougher messes, every piece of the feeding system is 100 percent dishwasher safe! Choose the bowl size and stand color you prefer for your order.
Not Yet Reviewed
$44.95
—
$100.95
We put these complete fuel lines together a few years ago for single feed carbs. With these kits, you get a fuel pressure gauge, a chrome plated brass housing fuel filter, and an NPT pipe fitting for braided hose. The line mounts to your carb's fuel line fitting with a special collar bracket that allows fuel to flow easily from the line to the carb. Summit Racing™ moved the gauge to an inline position with the filter for a more compact assembly that can be set at the angle needed for air cleaner clearance and easy access.
( 5 )
$79.99
WeatherTech offers replacement pet bowls in your choice of stainless steel or FDA-approved BPA-free white plastic. The dishwasher safe bowls are available in a variety of sizes, individually or in pairs.
Not Yet Reviewed
$43.95
—
$95.90
Summit Bucks
ACDelco GM Genuine Parts fuel feed lines are GM-recommended replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. These original equipment lines will provide the same performance, durability, and service life you expect from General Motors. Order the model designed to fit your application.
( 5 )
$170.99
—
$368.99
Mopar Replacement fuel feed lines are genuine OE replacements made from quality materials to provide reliable, long service with the right fit, function, and value. Aging lines can crack, rust, and leak—affecting fuel economy and performance. These lines are available in a variety of configurations for fitment on specific vehicles.
( 31 )
$142.99
—
$1,122.99
Summit Racing™ offers air conditioning harnesses for a wide range of vehicles—including countless Chevrolet and Pontiac cars and trucks from the 1960s and '70s. These direct-fit replacements include all the necessary OEM-type connectors and wiring for a complete installation. The harnesses are application-specific, with features that pertain to each vehicle and A/C system. Reconnect your factory air conditioning with an assist from Summit Racing™.
Not Yet Reviewed
$58.99
Classic Tube fuel supply lines are manufactured to DOT specifications using only the best American materials (original equipment material or stainless steel) and the latest technology. Specially trained personnel, advanced CAD technology, and quality control at all levels ensure total design integrity with patterns matching the original specs for a perfect fit in your vehicle. Whether you need fuel tank-to-pump, pump-to-carb, fuel feed or return lines, Classic Tube has the individual lines and line sets to feed your fuel supply. Choose those needed for your vehicle.
( 4 )
$162.99
—
$349.99
Palmgren gear head drill presses are versatile all gear-drive drill presses that are ideal for precision-drilling applications and continuous industrial use. The all gear-drive transmission delivers full power at any speed, driving the cutting tools at nearly 100 percent of the available motor horsepower. They use a combination of steel and reinforced fiber gears to ensure positive, quiet operation. All clutches are made of ground steel for added performance and strength. Their wide speed range make Palmgren gear head drill presses ideal for drilling everything from small to large diameter holes quickly and easily. Features and benefits include: * Wide speed range with eight different speeds * Forward and reverse spindle switch * T-slotted production table and base * Rack and pinion table raiser * Front-mounted, dial-adjusted work stop * Includes chuck guard and work light * Fully enclosed machine tool spindle with internal Morse Taper (3 or 4 MT depending on model) mounted in precision bearings for maximum accuracy and minimized deflection * Simple knob selectors for operator ease in changing spindle speeds * Front-mounted control panel designed for operator convenience * Bench and floor models available * Select models include coolant system * Quick-release drill ejector on particular drill presses * Available with 3-phase motors * Electro-magnetic, push button clutch power feed on select models; dial-in the desired feed rate and the power feed disengages automatically when the preset depth is reached
Not Yet Reviewed
$6,068.55
—
$10,760.99
Mopar oil cooler lines offer an OE fit, with lines manufactured from quality materials—such as rubber or steel—to provide the right look and performance for the worn factory originals in your Chrysler, Dodge, or Jeep. Replace with confidence; choose Mopar Replacement parts. Select the engine oil cooler line model designed for fitment on your vehicle application.
( 1 )
$414.99
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
( 2 )
$10,868.33
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 2 )
$6,215.21
AFR 385cc Magnum BBC competition racing heads will feed your large displacement, high-rpm race engine the air it needs to deliver monster performance. The 385cc Magnum features AFR's trademark .750 in. thick head deck, A356 aluminum castings and Titanium retainers, as well as 100 percent CNC-ported intakes, exhausts, and combustion chambers to deliver the big flow characteristics to provide you with the power you need to win! Keep your monster engine both strong and powerful—allow it to feast on the plentiful airflow of the AFR 385cc Magnum BBC competition racing heads.
Not Yet Reviewed
$4,601.10
—
$5,344.50
Summit Racing™ 4-port fuel pressure regulators feed your power-hungry engine for maximum performance. Our regulators are crafted from billet aluminum and are anodized, offering a great look under your hood to match their performance. They have a linear rising rate of 1:1 up to 20 PSI of boost, then a rate 0.75:1 once 20 PSI is exceeded. Carbureted or EFI, our Summit Racing™ fuel pressure regulators will easily install and adjust to fine-tune and dial-in your performance.
( 30 )
$93.99
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,265.99
—
$2,445.99
Rick's Hot Rod Shop RestoMod fuel tanks deliver factory fitting stamped steel tanks. They can be combined with a modern fuel pump module assembly to feed your LS or fuel injected engine at an affordable price. No cutting, drilling, or modifications needed--just bolt it in and RUN!
( 8 )
$469.99
—
$1,135.99
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$4,550.15
—
$5,565.20
Got a hankering for heavy-duty performance? Chevrolet Performance T-56 Super Magnum 6-speed transmissions offer the most in combined strength, versatility, and control. Plus, they are able to withstand an unbelievable torque capacity--700 lb.-ft.--while providing crisp shifts! These beefed-up versions of the TR6060 will certainly fill your craving for high performance with larger components. Chevrolet Performance T-56 Super Magnum 6-speed transmissions combine greater strength with precision engineering to feed the passions of cruisers and track racers alike. Highlights of the T-56 Super Magnums: * Designed for custom, retrofit installations of Chevrolet Performance LS crate engines * Exterior case similar to fourth-generation F-body with stronger, high-capacity gear sets, input shaft and output shaft used in the TR6060 * 26-spline input shaft * 31-spline output shaft * Slip-yoke design * Gear ratios: first through sixth--2.66, 1.78, 1.30, 1.00, .80, .63 * 40-tooth reluctor ring for use with electronic vehicle speed sensors in Chevrolet Performance controllers * Accommodates three shifter positions * Includes: 2-position shifter plate, shifter handle, ball-type shifter knob with Chevrolet Performance logo
( 1 )
$5,691.84
On Sale
Aeromotive A1000 Stealth fuel tanks help feed your hungry horsepower needs. These powdercoated steel tanks feature a self-contained pump and filter inside their high pumping Stealth A1000. With that you get their innovative baffling/tray system that not only controls slosh but keeps your pickup submerged to feed heavy acceleration, extreme driving, and--even when fuel levels are low--provide consistent performance. Slapping on a bigger fuel pump doesn't mean you'll have all the fuel you need. Aeromotive has the solution to fight starvation--A1000 Stealth fuel tanks.
( 1 )
$1,840.80
$1,656.72
World Products has made improvements to virtually every area of the new Merlin IV engine blocks—with the goal of producing the most technologically advanced and best-performing iron BBC block available today! New features include thicker main webs for increased strength and thicker cylinder walls which are nominally .310 in. @ 4.600 in. bore. In addition to the standard BBC 9.800 in. and 10.200 in. deck heights, new heights measuring 9.500 in., 9.850 in. and 10.250 in. are now available. The World Products Merlin IV engine blocks are also available with a 2.120 in. BBC cam journal and standard .842 in. lifter bores, or with a 2.283 in. journal for a 55mm Babbitt cam and .904 in. lifter bores. World Products has added a front oil feed for dry sump systems, and relocated the lifter oil feeds and restrictor provisions to the front of the blocks.
( 3 )
$3,842.02
—
$5,173.48
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
