Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1,075 Results Found For "Order"
Showing In Stock Items. Show All Items.
Not Showing Customizable Items. View Customizable Items.
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
—
$2,299.99
Clearance
Catco Direct-Fit Catalytic Converters
Since you have to use a catalytic converter anyhow, you might as well use one that will last a long time and maintain your vehicle's performance level in the process. Catco direct-fit catalytic converters feature 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat—all of which help them to last longer. These Catco units are direct replacements for OE converters and will install with little or no modification. Some converters have steel air tubes with perforated holes to help distribute the airflow evenly, without robbing power. New flanges are included when necessary. Order the model designed for your vehicle application.
( 57 )
$411.99
$179.50
—
$1,744.99
Mickey Thompson ET Street S/S Tires
Mickey Thompson ET Street S/S tires are performance radial street tires that are drag-strip ready. They combine the proven Mickey Thompson R2 drag tire compound with polyester-ply, steel belted, tubeless radial construction to deliver performance, strength, and reliability. They're available in various sizes to fit nearly any performance wheel. M/T products are built to win with an unceasing drive for faster—better! Order the Mickey Thompson ET Street S/S tires designed for your wheel application. Product features include: * DOT-approved for street use * Tread void offers improved hydroplane resistance and excellent dry traction * Proven R2 compound delivers superior traction at the strip * Little or no burnout required * Tubeless, radial construction provides lead-free seal
( 695 )
$291.69
—
$528.59
BluePrint Engines GM 383 C.I.D. 436 HP Dressed Stroker Long Block Crate Engines
Bolt some serious power into your ride with a BluePrint GM 383 c.i.d. 436 hp dressed Stroker long block crate engine. They're built from the ground up to provide a reliable 436 hp and 443 lbs.-ft. of torque to power your street rod, musclecar, or any other project that needs serious power. Each engine is hand-assembled and precision-balanced to ensure it will run smooth and strong for years to come. Three models are available; compare options and order the engine that best fits your needs. Product features and specifications: * 4-bolt main block * New cast crankshaft * Hypereutectic pistons * Chevy heavy beam rods with 150,000 psi bolts * Moly rings * Balanced rotating assembly * Melling high-volume oil pump * Hydraulic roller lifter camshaft * .544 intake / .555 exhaust * 230 intake / 236 exhaust duration at .050 * 110 degree lobe separation * Heavy-duty double roller timing set * Aluminum cylinder heads * Hardened retainers and springs * Swirl polished intake and exhaust valves * Hardened pushrods * Dual plane satin finish intake manifold * Carburetion * Distributor, plug wires and plugs * New valve covers * Dyno tested—and shipped with results
( 63 )
$7,299.00
—
$8,399.00
Holley Mid-Mount Complete Accessory Systems
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 108 )
$2,049.95
—
$4,714.95
Mickey Thompson ET Street R Radial Tires
Finally, DOT-approved race tires that can be driven on the street! Mickey Thompson ET Street R radial tires feature the latest ET drag technology for the ultimate traction at the track while still being legal on the street. Their minimal tread void offers great dry weather traction for the perfect launch and pass. The stiff sidewall provides excellent stability—ideal for use on cars with automatic transmissions. Don't think stick shift cars are left out, though! Many competitors have found great success with ET Street R tires on their manual equipped cars. More than a dozen sizes are available; order a set for your ride.
( 299 )
$343.29
—
$539.99
Summit Racing™ Automatic Transmissions
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 65 )
$1,899.99
—
$6,190.99
Summit Racing™ Universal Rod Builder Exhaust Kits
Summit Racing™ universal rod builder exhaust kits come complete with everything that you need to construct the custom exhaust system you've been planning. The pipes are available in a variety of materials, finishes, and diameters. You can cut and weld to your heart's content. These kits have it all! Order the model that best suits your exhaust project. The Summit Racing™ universal rod builder exhaust kits feature: * Four 4 ft. long straight sections of tubing * Four 180 degree mandrel bends * Four 90 degree mandrel bends * Four 45 degree mandrel bends * Hardware and mufflers are not included
( 79 )
$279.99
—
$629.99
Summit Racing™ Pro LS Crankshafts
Summit Racing™ Pro LS forged steel crankshafts deliver industry-leading fit, finish, and durability at an affordable price. Order the model recommended for your year/make and engine application. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Core hardened to optimum strength, then tempered to remove stresses * Nitride hardened, which results in less distortion, excellent case depth, and more fatigue life * Profiled counterweights reduce windage * Precision stroke and indexing * Lightening holes are drilled in the rod journals for quicker engine acceleration * Gun-drilled Main Journals for quicker engine acceleration * Each crank is magnetic particle tested to ensure it's free of flaws * Large radius fillets for increased strength, narrowed rod bearings for reduced friction * Straight shot oiling for maximum lubrication just prior to maximum load angle * Maximum journal tolerances of +/- .0001 in. ensure consistent bearing clearance * Micro-polished journals with chamfered oil holes for maximum durability and bearing life * Optimized counterweight placement for reduced twisting at high RPM and ease of balancing * High-quality reluctor rings are installed with precision fixturing * Extra 3/16 in. front keyway for blower cars
( 13 )
$899.99
Summit Racing™ Geared HD Engine Stands
Summit Racing™ geared HD engine stands smoothly rotate 360-degrees and lock in place. The gear-driven stands feature a V-frame base for maximum stability, six swivel casters (four locking), four stabilizing feet for added safety, and folding legs for easy storage. These Q235 steel stands have a black powdercoat finish for long-lasting protection. Order the weight capacity needed for your projects.
( 16 )
$379.99
ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 10 )
$3,688.99
Summit Racing™ Rear Drum-to-Disc Brake Conversion Kits
Our Summit Racing™ rear drum-to-disc brake conversion kits take the guesswork and high price tag out of building a braking system. They're available in a variety of sizes and rotor styles for different axle models and housing flanges. Order the kit recommended for your vehicle application. Summit Racing™ rear drum-to-disc brake conversions include: * Rotors * Calipers * Mounting brackets * Brake hoses and banjo bolts * Installation hardware
( 235 )
$466.99
—
$923.99
TMI Cruiser Series Low Back Bucket Seats
TMI Cruiser Series low back vinyl bucket seats are a complete replacement solution, with slider tracks and your choice of contrast stitching around the perimeter. No longer will you have to waste your time and money trying to repair worn-out factory seat frames and recover them with new foam and upholstery. Clean and classy, the Cruiser Collection universal seats come fully assembled and are 100 percent ready to bolt in with the appropriate mounting brackets (sold separately). Pro Series all-metal frames allow you to tilt or slide your seat. Tilting frames enable you to completely recline your seat, an option that was not always available in classic cars. Frames are wrapped with a heavy bolstered, high-density foam. No re-upholstering required, no hunting down old frames. Select your options and order a pair of bucket seats for your vehicle!
( 8 )
$1,068.00
BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
( 1 )
$23,499.00
Stainless Works Performance Headers
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 32 )
$1,519.05
—
$2,968.75
QA1 1963-72 C10 Coilover Conversion Systems
Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 5 )
$4,450.95
—
$5,775.95
Ridetech Bolt-on 4-link Systems
Ridetech Bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.
( 8 )
$1,625.00
—
$2,995.00
Arnott Coil Spring Conversion Kits
Arnott coil spring conversion kits are expertly designed to replace a vehicle's failing air suspension components with traditional steel springs. All of Arnott's coil springs are constructed from U.S. steel and are designed and tested to provide a great ride along with many years of trouble-free driving. If you have an older vehicle or you're dealing with a multitude of air system issues—order the Arnott coil spring conversion kit designed for your make and model. Items, features, and notes: * Custom valved shock absorbers * Powdercoated coil springs * Most kits available with electronic bypass module (EBM) that eliminates fault codes * Pre-assembled for safe and easy installation * OE fit with no necessary modifications * Not recommended for customers who tow larger trailers or often carry large loads (may cause improper angles for headlight beams)
( 30 )
$385.29
—
$2,218.58
Summit Racing™ Cast Crankshafts
Summit Racing™ cast crankshafts are perfect for mildly built street engines or just to replace stock crankshafts that have seen better days. These cast crankshafts are precision-ground and micro-polished to exacting tolerances. Order the Summit Racing™ cast crankshaft in the application that you need.
( 48 )
$274.99
—
$364.99
Wilwood Classic Series Dynalite Front Brake Kits
Wilwood Classic Series Dynalite front brake kits deliver consistent stopping power for your classic cars. The forged Dynalite calipers combine technology and style to create stronger, more reliable clamping power that's proven to outperform existing styles of this popular caliper size. The complete packages also include solid surface or drilled and slotted rotors, premium brake pads, brackets, and all required hardware. Kits are available to accommodate the needs of daily driving and show cars. Order the model designed for your vehicle application.
( 261 )
$766.55
—
$1,055.64
TMI Pro-Series Sport Low Back Seats
TMI Pro-Series Sport low back seats are complete replacement bucket seats with slider tracks. The vinyl covers and stitching are each available in a variety of colors. Trying to repair worn-out factory seat frames with new foam and upholstery is time-consuming and expensive. Pro-Series reclining seats come fully assembled and ready to bolt in with the appropriate mounting brackets (sold separately). They will fit most any vehicle application. Order the shade you prefer. Details: * Contrast stitching around seat perimeter lets you perfectly accent your exterior and add sports style to the interior * All-metal frame allows you to tilt or slide your seat. Tilting frames let you completely recline * Frames are wrapped with a heavy bolstered high-density foam
( 9 )
$1,738.00
QA1 Sway Bars
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 141 )
$279.95
—
$979.95
Cold Case Performance Aluminum Radiator Modules
Cool just got better! Cold-Case performance aluminum radiator modules bundle performance components for the most efficient cooling available. They've packaged their high-quality radiators with their exact fit shrouds and electric fans to deliver the best fit with an original look, an easy install, and effective cooling at an affordable price. Order the universal or application-specific model best suited for fitment in your engine bay. All Cold-Case radiator modules feature: * OEM-stamped, fully polished tanks * Aluminum shroud * Electric fan(s) * Correct OEM fitment * Lightweight, efficient aluminum construction * 100 percent TIG-welded * Internally welded filler necks offer a clean, factory look * Two oversized cooling rows for increased capacity * 1 in. to 1 1/4 in. tubes for higher volume * Works with factory filler cap * Includes OEM-style petcock * 42.7 percent lighter than comparable copper radiators * 30 percent thicker materials than no-name aluminum radiators * 60-day COOL guarantee
( 200 )
$588.54
—
$850.54
Summit Racing™ Rear Lowering Leaf Springs
Summit Racing™ offers rear lowering leaf springs for a wide range of vehicles, from the 1960s and up. These suspension enhancements can give your car, truck, or SUV a more aggressive stance with improved ride quality. The leaf springs are available for a variety of lowered heights; order the model recommended for your application.
( 39 )
$124.99
—
$169.99
