Availability
Showing In Stock Items. Show All 61 Items.
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$308.99
Continental service station air hoses serve as high-quality, general-purpose hose replacements that are available coupled or uncoupled for use on towers, reels, or curb service. The hoses feature black EPDM tube construction and blue EDPM oil-resistant covers with 4-spiral synthetic reinforcement for long service life. Air hose I.D. range: 1/4 to 1/2 in. Temp range: -40 F to 190 F (-40 C to 88 C). Please note: these service station air hoses are not designed for use with oil, grease, or fuel transfer.
Not Yet Reviewed
$503.99
For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.
( 39 )
$1,784.99
Upgrade your worn out rubber brake lines with Rough Country extended stainless steel brake lines. These DOT-approved brake lines offer the necessary extra length to install your application, and are ideal for anyone who wants to swap out poor performing or decaying factory brake lines. They feature an internal PTFE layer covered by a durable braided stainless steel, keeping your lines free from off-road debris, rocks, and mud, while also preventing expansion of the internal layer--even under 4,000 psi--keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. Rough Country extended stainless steel brake lines are finished with high-quality hollow fasteners at both ends to provide a leak-free flow path. Order the ones made for your vehicle's application.
( 3 )
$89.95
—
$99.95
RapidAir Products Maxline tubing is industrial-quality compressed air piping recommended for layouts with many obstructions or corners. Long continuous pipe lengths require fewer joints and are suitable for direct burial in the soil or under concrete. Ideal for installation in small shops or large manufacturing facilities, Maxline tubing connects to any existing piping system and is ideal for both in-wall and on-wall installations. Features of RapidAir Products Maxline tubing include: * Semi-flexible tubing for compressed air, inert gas, or vacuum * Maintains shape after bending * Corrosion-free HDPE/aluminum core multilayer tubing * Assembles with compression fittings * Smooth inner surface is more efficient * Modify system at any time, even after installation * 1/2 in. I.D. recommended for up to 75 ft. * 3/4 in. I.D. recommended for up to 150 ft. * 1 in. and 2 in. I.D. are best for longer lengths or high-volume * Roll lengths up to 300 ft. available * Working pressure: 200 psi at 73 degrees F, 160 psi at 140 degrees F * Temperature range: -40 degrees F to 140 degrees F * Compatible with common compressor oils * For outside installation, cover or paint to protect from UV rays * Meets ASTM F1282
( 9 )
$409.99
Made from special EPDM rubber, Continental OE Technology Series hoses last 5 to 10 times longer than regular hoses. Designed for heater hose applications that endure higher underhood temperatures and require a higher heater resistance. 2-Spiral Aramid reinforcing sleeve gives the hose a burst rating 10 times stronger than rayon-reinforced hose.
( 13 )
$284.99
—
$418.99
Classic Tube manufactures top-quality, pre-bent brake lines from stainless steel or OE steel. Made with state-of-the-art, computer-driven CNC tube benders to factory specifications, these line kits come complete with fittings and are an exact match for your vehicle. Hundreds of Classic Tube kits are available, covering virtually every make, model, and braking system imaginable.
( 242 )
$208.99
—
$386.99
Garage Grip Professional Grade Non-Slip Floor Coverings conveniently transform garages, basements, trailers, workshops, outdoor patios, and sheds into safe, waterproof, and attractive spaces. Garage Grip uniquely combines industrial-grade durability with comfort, and safety with style. The mats are great for snow containment, parking pads, anti-fatigue workshop flooring, home gyms, home offices, man-caves, playrooms, and trailers. Their non-slip surface is sustainably manufactured from 100 percent recycled plastic bottles. Specified by Fortune 500 energy companies throughout North America to contain oil spills, Garage Grip is ultra-rugged, naturally stain-resistant, long-term UV-resistant, insulating, anti-fatigue, and easy to clean. The covering prevents staining of the concrete floor from oil and solvents and is resistant to magnesium chloride and common street salts. Unlike vinyl rolls and epoxy coating, Garage Grip is scrim-reinforced to prevent material expansion, buckling, and peeling. Order the size and color you prefer. Additional notes: * Meets ANSI 137.1 slip resistance safety standards * Passes ASTM G21 Fungal Resistance Test Standard * Non-abrasive * Easy to vacuum and hose down * Rapid DIY install: Simply unroll and free float in place * Industrial-grade durability * Stylish appearance great for car enthusiasts, workshop, and family use * Two layers of waterproofing * Prevents snow and sleet from entering the home * Sound mitigating * Total Thickness: 200 mil * Installation Method: Free Float, Double Sided Taped, or TPO Adhesive
( 19 )
$349.99
—
$438.99
BedRug floor coverings sport marine-style polyester fiber bonded to foam, all of which is die-cut to fit the passenger cab and/or rear cargo areas of specific models. This closed-cell foam will not absorb water; and dirt and spills remain on the surface--you can clean them out with a hose, vacuum, or compressed air. If you're tired of bare metal or worn-out carpeting in your vehicle, BedRug floor coverings are an attractive and functional upgrade! Just match your specs with the bed rug tailored for your ride.
( 4 )
$199.95
—
$299.95
These BedRug BedTred floor coverings look and feel like high-end, spray-in bed liners and are custom-molded for a perfect fit. They are easy to install and even easier to remove and hose off after a long day on the trail. The coverings do not absorb water and will dry in as little as 20 minutes. Also, they are resistant to harsh chemicals, such as bleach, oil, battery acid, and gasoline, and are both fade and UV-resistant. There's nothing to trim and no tools are required to install or remove them for cleaning. The BedRug BedTred floor coverings' material is super-resistant to stains, odors, mold, and mildew and the 1/4 in. thick polypropylene foam insulates your interior from road noise and heat. The driver area features a tough plastic heel pad that's stitched into place and the scrubbable and skid-resistant TPO composite surface features an aggressive, textured black finish.
( 6 )
$249.95
—
$359.95
John Dow air-operated oil delivery systems are complete fluid transfer pumps designed for 16- and 55-gallon drums. They include all required equipment for efficiently transferring motor, synthetic, and hydraulic oil, as well as automatic transmission fluid (ATF). These 3:1 ratio medium pressure systems include a delivery gun and a 10 ft. delivery hose (the 16-gallon package includes a drum cover). Order the size and options preferred for your application. Features, items, and specs: * Differential air motor ensures smooth pumping * Heavy-duty control valve * Air inlet pressure of 70 to 115 psi * Air inlet connection is 1/4 in. NPT (female) * Air motor effective diameter is 2.49 in. (63mm) * Max pressure of 348 psi * Outlet connection is 1/2 in. NPT (male)
Not Yet Reviewed
$467.99
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,549.95
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 11 )
$1,417.99
These OTC puller sets will provide the ability to service a wide array of vehicles. From passenger cars to trucks, SUVs, commercial applications, and farm vehicles, OTC has you covered. OTC manufactures these puller sets out of quality materials to ensure performance and dependability. Sets contain: * Single stage hydraulic hand pump assembly * Pressure gauge * Hose half coupler with dust cap * 6 ft. hydraulic hose * 17 1/2-ton ram with threaded insert * 5-ton capacity 2/3-jaw puller * 17 1/2-ton capacity hydraulic push puller with 16 1/2 in. legs * 22 1/2 in. legs * 17 1/2-ton, 3-jaw Grip-O-Matic puller * 17 1/2-ton, 2-jaw puller head * 2 combination 2/3-jaw pullers * Shaft protector set * Step plate adapter set * Pulley pulling attachment * Internal threaded adapter set * Bearing cup pulling attachment * 3 bearing splitters * Speed crank * Tee adapter * Special puller forcing screw * Ram cap * Ram adjusting screw * Pushing adapter * Two 5/8-18 F x 3/8-16 M threaded adapters * Two 5/8-18 F x 1/2-20 M threaded adapters * Two 5/8-18 F x 1/2-13 M threaded adapters * Two 5/8-18 F x 5/8-13 M threaded adapters * Two 5/8-18 F x 3/4-16 M threaded adapters * Two 5/8-18 F x 3/4-10 M threaded adapters * Two 5/8-18 F x 7/8-14 M threaded adapters * Two 5/8-18 F x 7/8-9 M threaded adapters * Two 5/8-18 F x 1-14 M threaded adapters * 1 in.-8 F x 5/8-18 M threaded adapter * 1 in.-8 F x 1 -14 M threaded adapter * Two 5/8-18 F x 3/4-16 F threaded adapters
Not Yet Reviewed
$3,801.99
Easily transport and transfer diesel fuel in the back of a pickup truck. John Dow low-profile carrytanks are specifically designed to fit flush within the bed of a pickup truck so you get the convenience of a portable refueling station for your farm, construction, recreation, industrial, and fleet locations. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill level gauge * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides IMPORTANT: This carrytank is for use with diesel fuel only. DO NOT use with gasoline or other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.
( 2 )
$1,208.99
Easily transport and transfer gasoline wherever it's needed! John Dow low-profile carrytanks provide the convenience of a portable refueling station for farm, construction, recreation, industrial, and fleet markets. They're specifically designed to fit within the bed of a pickup truck and below the height of the truck bed sides. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the gasoline carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill level gauge * 12 V transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides * Internal baffle prevents sloshing during transport IMPORTANT: This carrytank is for use with gasoline fuel only. DO NOT use with other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.
Not Yet Reviewed
$1,862.99
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,658.95
—
$8,723.95
OTC Hendrickson suspension bushing master kits for heavy-duty vehicles make pivot and D-pin bushing removal and installation easier tasks. Because the patented design allows the tool to be mounted to the suspension piece, the weight of the tool does not need to be held in place during operation. The kits also include centering adapters that align the tool and reduce the likelihood of bushing damage or improper installation. With the included OTC 25-ton cylinder, even bushings covered in road dirt and salt are easy to replace. These master kits feature an OTC Stinger Series air/hydraulic pump, with the needed hose and couplers to make it ready to use right out-of-the-box.
Not Yet Reviewed
$2,391.99
—
$2,532.99
Combustion! Even the word sounds hot. Controlling that internal heat is an important step toward longer engine life and top performance. Keyser Manufacturing single pass radiators are "heat exchangers" featuring 100 percent aluminum core construction and a billet machined filler neck. The units are TIG-welded for durability, with fin covers enclosing the top and bottom for a clean look, as well as protection and an easy installation. Radiator interiors include a 3 in. thick furnace-brazed core and two rows of 1 in. cooling tubes. (Performance model tubes are 25 percent wider.) Many of the Keyser Manufacturing radiators also have a transmission oil cooler, an important asset when you consider that over 14 million transmissions fail each year--most from overheating. The crossflow-style radiators are produced in a variety of dimensions to fit dozens of vehicle types; inlet and outlet sizes and locations also vary. Specifications: * Screw-in universal inlet (accept 1 1/2 in. hose, -16 or -20 AN fittings, sold separately) * 1 3/4 in. outlet * 3/4 in. female pipe oil cooler fittings sold separately * No epoxy is used in the radiator cores
( 1 )
$472.99
Easily transport and transfer Diesel Exhaust Fluid (DEF) wherever it's needed! John Dow low-profile carrytanks provide the convenience of a portable refueling station for farm, construction, recreation, industrial, and fleet markets. They're specifically designed to fit within the bed of a pickup truck and below the height of the truck bed sides. These self-contained tanks come with a 12 V power source; simply hook up and start pumping with the hose and automatic nozzle. You can easily transport the carrytank to a vehicle or leave it in a convenient spot on-site. Features include: * Rugged linear polyethylene construction * Fill Level Gauge * 12-volt transfer pump delivers fuel at 10 gallons per minute * Automatic dispensing nozzle with removable drip tray * Integrated forklift pockets for moving when full * Molded handles make it easy to lift and carry the tank when empty * Integrated recesses are provided for securing tanks with ratchet straps during transport * Protective and lockable cover * Fits easily in the bed of a pickup truck below the truck bed sides IMPORTANT: This carrytank is for use with Diesel Exhaust Fluid (DEF) only. DO NOT use with other fuels or liquids. It is the user's responsibility to comply with local, state and federal requirements pertaining to safe transportation, loading and discharging tank contents.
Not Yet Reviewed
$1,077.99
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
—
$25,699.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
iDEAL Equipment commercial low-rise pad lifts are designed for cars, SUVs, vans, and trucks. The 10,000 lb. lift includes the latest in design and safety features, including twin hydraulic cylinders, three locking height positions with dual latch releases, durable rubber contact pads, protective hose covers, and outer drive-over fixed platform frame This allows for wheel service repairs for a wider range of vehicles, including uni-body vehicles using the included multi-height adapters and rubber pads. The versatility of the pad lift design allows vehicles to be driven-on the pad lift in either direction, while also having the ability to position the hose and power unit to either side of the pad lift, allowing for the best fit in a shop or garage. Easy lift operation is provided with a high-quality electric/hydraulic 115 V DURO power unit, mounted to a pedestal post combined with dual point manual lock release.
Not Yet Reviewed
$4,590.00
Flaming River 1965-70 Mustang right hand drive power rack and pinion cradle kits update your classic muscle with modern driving comfort. These right hand drive kits are designed to be direct bolt-ins that include everything you need for installation (hoses are sold separately). Flaming River's patented cradle mount technology uses the original chassis hole locations with no modification required. These kits are available with or without a stainless steel tilt steering column, and columns come in your choice of polished or paintable finishes. Flaming River 1965-70 Mustang right hand drive power rack and pinion cradle kits make driving your classic even more enjoyable. Most kits include: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints *.On some models, a steering column, power steering pump, and power steering reservoir are also available
Not Yet Reviewed
$2,598.99
—
$3,339.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
