Availability
Showing In Stock Items. Show All 57 Items.
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,499.00
RideTech subframes deliver several key improvements over the original and some existing aftermarket subframes. Optimized suspension geometry, improved wheel and tire clearance, and rack and pinion steering technology, plus many more features will surely put RideTech's subframes on the top of your builder's wish list. Select the kit with the preferred spindles. Features and benefits: * Optimized geometry provides improved roll center, Ackermann, camber gain, caster and bump steer * Lowers stance 1 to 3 in. and maintains factory track width while increasing wheel and tire clearance * 2 in. more tire clearance per side over stock subframe allows better turning radius with larger tires/wheels * Fits up to 6.5 in. BS with no modifications or reduction in turning radius * Rack and pinion steering upgrade provides improved steering feel, enhancing driver feedback * Modular design is compatible with coilovers or ShockWaves (sold separately) * Subframe features durable powdercoat finish for great, long-lasting good looks and corrosion resistance * Available with AFX pin or late model hub spindle design -- Hub spindle allows install of modern C5/C6 Corvette brakes and C5/C6/C7 hubs (hubs not included) -- Pin spindle is compatible with stock style brakes (including aftermarket kits that fit stock spindle) * One-piece billet 6061 T-6 aluminum upper control arms and steering arms add superior strength * Larger front sway bar controls body roll, improving weight transfer * Tubular lower control arms include eccentric adjustment for caster and camber adjustments * Alignment adjustments are made complete under the car --no adjustments inside engine bay * Multiple motor mount options * Included adjustable transmission crossmember compatible with most popular manual and automatic transmissions * Improved header clearance and exhaust routing allow for a variety exhaust solutions
Not Yet Reviewed
$6,495.00
—
$6,645.00
Unlock exhilarating performance from your 2022 Mustang with 750 horsepower and 670 lbs.-ft. of torque provided by the Roush 5.0L Mustang Phase 2 Supercharger kits! Building off the 5.0L V8 engine, the Roush Supercharger adds an impressive 300 hp and 260 lbs.-ft. of torque over the stock engine. Included in these Roush Supercharger kits is their high-capacity cooling technology with a full-face low temperature radiator. The larger low temperature radiator provides increased cooling capability, allows for greater power output, and delivers maximum performance. Compatible with both automatic and manual transmission vehicles, these Roush Supercharger kits feature Eaton's coveted TVS R2650 technology for increased power output throughout the rpm band and are engineered for durability with large bearing and timing gears. The 2022 Mustang Supercharger kit by Roush had to meet new Tier 3 Emissions Standards required on the base Mustang for this model year. Roush achieved this by incorporating a hydrocarbon trap in the air induction system as well as a unique calibration for the 2022 model year. Thanks to massive engineering efforts, they were able to maintain previous model year performance targets for power and torque. Because Roush is with you on this ride, their Supercharger kit includes the Roush's 3-year/36,000-mile Limited Powertrain Warranty when installed by an ASE certified technician. The Supercharger kit's calibration is optimized for 93-octane fuel but is also compatible with premium fuel. Product features and highlights: * Fits 2022 Mustang GT 5.0L V8 * Produces 750 horsepower and 670 lbs.-ft. of torque! * High-Capacity Cooling Technology with a full-face low temperature radiator * Compatible with both automatic and manual transmissions * Features Eaton's TVS R2650 technology for increased power output throughout the rpm band * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * Includes all necessary installation hardware Note: Not compatible with Ford Mustang 5.0L equipped to meet Euro 6.2 emission standards. (Euro 6.2 dictates the use of particulate filters which are not compatible with the ROUSH Supercharger system). Not compatible with Mach 1, Bullitt, or GT350.
Not Yet Reviewed
$8,799.99
Foot pedal-controlled Baileigh Industrial SR-5016E powered slip rollers are a durable, efficient choice for any HVAC or general fabrication shop. The steel plate frame and formed base maintain high accuracy, while the one-hp motor runs on 110 V power—so it can operate anywhere. Baileigh SR-5016E powered slip rollers feature a 51 in. forming width and can bend 16 gauge mild steel across their full working width. Other product features and specs include: * (2) driven rolls for more power * Easy to operate with a foot pedal for both left- and right-rolling applications * Solid steel uprights on both sides make this a rigid machine * Heavy-duty, fully-formed steel base helps prevent deflection * Built using only the highest-grade components for years of performance * (3) integrated emergency stops for a safer workplace * 3 in. upper roll diameter * 4 1/2 in. minimum forming diameter * Wire grooves and stand
Not Yet Reviewed
$6,082.00
The Baileigh Industrial BB-5014F finger brakes are must-haves for any shop. These box brakes let you clamp sheet metal with a foot pedal, keeping both hands free to easily position the material. They can bend a maximum capacity of 14-gauge mild steel across their full 50 in. length. Tough tasks are made easier with the Baileigh Industrial BB-5014F finger brakes. Additional features: * Adjustable stop rod allows you to easily produce repeatable bends * Knobs at each end let you fine-tune the clamping pressure to fit your application * 12 fingers of varying widths can be rearranged to create different sizes of tanks, pans, boxes, and more * Spring-loaded cylinder assists in lifting apron—particularly useful when bending at full capacity * Blade gap adjustment enables the use of various gauges of sheet metal * Fully welded steel framework maintain accuracy and reduces deformation
Not Yet Reviewed
$5,300.99
Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 1 )
$5,775.95
Summit Bucks
Give your Ram truck more towing power with our new E-Force Stage 1 street legal supercharger systems. This complete supercharger system provides maximum flow, minimum temperature rise, quiet operation and reliability. It features minimum air restriction in and out of the supercharger for optimal flow and performance. The individual 7 in. long intake runners allow for maximum low end torque for towing and off-road applications while maintaining great daily driving manners.
( 4 )
$9,096.95
Ready to take your 2024 5.0L Mustang GT to the pinnacle of performance? Roush Phase 1 supercharger kits are engineered to transform your Mustang into a 740 hp powerhouse with unbeatable durability, cooling, and power delivery. The 740 hp, 600 lbs.-ft. of torque Roush S650 Mustang Phase 1 supercharger kit is engineered to provide exceptional performance through innovative design and cutting-edge components, tailored specifically for Mustang enthusiasts seeking peak horsepower and reliability. Roush achieved a 10.55 second 1/4-mile at 133 mph and 0-60 3-seconds with a 1.39G acceleration force on a stock car with this supercharger and slicks on a prepped track (10R80 automatic transmission, 3.55 rear gear ratio). Additional product features and benefits: * This supercharger features a dual front inlet and front-drive setup, maximizing airflow with an optimized, high-flow inlet port. It's designed for ultimate airflow capacity, ensuring your engine breathes freely to produce unparalleled horsepower. * The supercharger head unit boasts a unique Roush Red finish, adding an unmistakable, high-performance look to your engine bay. * The kit reuses the factory twin 80mm throttle bodies, retaining a symmetrical appearance and allowing you to reuse stock induction components for a clean and streamlined look. * Featuring an inverted design, the Roush Phase 1 kit houses dual high-efficiency intercoolers. This setup maximizes heat transfer while lowering intake air temperatures, keeping your engine cool under high demand. * High-Flow Dual Cone Fuel Injectors: Equipped with optimized director plates, the injectors target fuel precisely for efficient combustion and enhanced performance. * Billet aluminum fuel rails provide maximum flow with minimal restriction, ensuring correct injector alignment and a consistent fuel supply to meet the demands of high performance driving. * Designed with a custom FEAD, 90mm pulley, and strategic hardware placement, the supercharger belt runs closer to the engine, reducing crankshaft load and enhancing overall reliability. * The large front heat exchanger delivers exceptional intercooling with minimal restriction to the factory cooling module. Its custom design makes installation straightforward, with no need to remove the front fascia, saving install time and minimizing any risk of damage. * Each kit includes a high-capacity degas bottle that prevents coolant aeration, offering superior cooling capacity for consistent performance. * The intercooler pump is a high-flow Bosch PCE model, delivering reliable cooling to support long-lasting supercharger performance. * Every hose in this kit is custom-formed to ensure a clean installation and streamlined underhood appearance, making the system as easy to install as it is to admire. * The entire kit is engineered to fit beneath the stock Mustang hood and K-brace without any modification. The K-brace doesn't need to be removed, making installation simpler and preserving the structural integrity of your Mustang. * All wiring is plug-and-play, offering a smooth and straightforward installation process. * Colder heat range spark plugs with a reduced gap come pre-installed, ensuring optimal performance and durability under increased boost. * The kit is calibrated with Roush's Diagnostic Tuning Software, delivering best-in-class performance while maintaining seamless diagnostic capabilities. This software ensures the kit runs smoothly while adhering to Roush's high standards. * Developed in partnership with Magnuson, a company with over 50 years of supercharging experience, this kit brings together Roush's and Magnuson's expertise for a product that excels in performance, durability, and innovation.
Not Yet Reviewed
$9,995.00
The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.
Not Yet Reviewed
$25,599.00
Detroit Speed offers Fox Body short long arm conversion systems for a variety of applications, including many Ford Mustang and Mercury Capri models from the 1970s, '80s, and '90s. These suspension kits redefine Fox Body handling with a no-compromise double wishbone design. They system replace the outdated factory suspension with modern geometry, increased strength, and race-proven adjustability—delivering premium fit, finish, and performance. * SUPERIOR SUSPENSION GEOMETRY and STABILITY: Detroit Speed's exclusive frame rail insert optimizes camber gain and roll center height, significantly improving front-end stability. The tubular upper and lower control arms reduce deflection, providing precise suspension movement and sharper handling response. * FORGED UPRIGHTS & EXPANDED BRAKE OPTIONS: Lightweight forged aluminum uprights feature modern hub-pack bearings for durability and reduced maintenance. This setup provides access to high-performance braking solutions for superior stopping power. * MAXIMIZED TIRE CLEARANCE: Designed for serious performance applications, these systems allow clearance for 275/35R18 tires on a 10 in. rim while maintaining full steering lock. Whether on the street or track, this setup ensures maximum grip without compromise. * FACTORY COMPATIBILITY, PERFORMANCE UPGRADE: These systems are optimized for factory 1987-93 V8 K-members and aftermarket K-members, ensuring seamless integration into high-performance builds. Some fabrication is required, but the result is a modernized, precision-tuned suspension that outperforms factory limitations. Available versions: * Single-Adjustable Coilover Control (032096-SDS): Detroit Speed/JRi aluminum coilovers offer Detroit Tuned valving for precision damping control with a single adjustment to fine-tune rebound. Combined with a 1 7/16 in. diameter adjustable-rate sway bar, this system delivers unmatched street and track performance. * Double-Adjustable Coilover Control (032096-DDS): Detroit Speed/JRi double-adjustable aluminum coilovers feature Detroit Tuned valving, allowing independent tuning of high and low speed rebound for maximum control. Paired with a 1 7/16 in. adjustable-rate sway bar, this system delivers fully customizable handling for both street and track applications. * Non-Adjustable High Performance Coilover Control (032096DS): Detroit Speed/JRi non-adjustable aluminum coilovers feature Detroit Tuned valving, delivering precision damping. Paired with a 1 7/16 in. diameter sway bar, this system provides optimized handling and stability for both street and track applications. FEATURES AND BENEFITS: • Optimized camber gain and roll center height for better handling stability • Tubular upper and lower control arms improve suspension geometry and reduce deflection • Forged aluminum uprights with modern hub-pack bearings for durability and reduced maintenance • Adjustable 1 7/16 in. diameter sway bar for improved front-end response • Clearance for up to 275/35R18 tires while maintaining full steering lock • Detroit Speed/JRi aluminum coilover shocks for precision damping (options): -- Single-adjustable -- Double-adjustable -- Non-adjustable
Not Yet Reviewed
$5,459.95
—
$5,980.95
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 19 )
$5,805.99
On Sale
EMAX vertical solo-mounted alternating silent expandable airlink systems meet high-demands with "whisper-quiet" performance. These systems are equipped with an advantageous alternating switch that will allow the units to alternate from one pump to another. The units will pump up to set pressure, then under the next start-up sequence the opposing pump will start, eliminating excessive running and allowing the pumps to cool under heavy loads. Plus, if one pump will not maintain set pressure and is not keeping up with demand, then both units will come on and run until the unit hits the pressure setting, after which it will go back into normal alternating mode. EMAX alternating silent air compressors have many features that make them easy to use, from automatic tank drains to belt tensioners. With EMAX's patented Whisper100 silent air onboard, these low-profile systems add four levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35 percent. Key features: * Alternating switch that will allow the units to alternate from one pump to another * Two low-rpm solid cast iron patented pressure lubricated pumps * Two industrial grade 1750 rpm TEFC motors * Two magnetic starters with relay switch * Two ASME certified vertical tanks * Whisper100 Silent Air system * Re-usable oil filter * Oil pressure gauge
Not Yet Reviewed
$11,340.94
—
$11,446.94
$10,773.89
—
$10,874.59
With its heavy steel construction, Baileigh Industrial's BB-4814 box and pan brake offers a great value for any shop. Product details: * Maximum capacity of 14 gauge mild steel across its entire 48 in. length * Bends up to 135 degrees * 2 heavy counterweights save time and energy for the operator with each lift and drop * Includes 9 hardened fingers to make many different sizes of boxes and pans, with a maximum box depth of 4 in. * Comes with an integrated floor stand, reinforced and positioned for optimum balance * Fully-welded steel framework prevents deformation and maintains accuracy when bending at full capacity * Offers a more affordable alternative to Baileigh's 12-gauge line of metal brakes
Not Yet Reviewed
$6,115.00
Baileigh BS-20SA-DM band saws are semi-automatic dual miter machines with a cast iron bow and steel frame to offer decades of reliable quality. Their hydraulic systems will speed up production and save you effort. Features include: * Maximum capacity of 13 in. O.D. round at 90 degrees * Accepts a 1.25 in. blade (included) for faster and more accurate cuts * Dual-mitering can move 45 degrees left and 60 degrees right * Inverter drive allows for infinite blade speed adjustments from 69 to 306 fpm * You can fine-tune the speed for materials like mild steel, bronze, or aluminum * Digital readout (DRO) allows you to reproduce settings with ease * Cast iron bow resists vibrations and helps to ensure a high-quality cut * Hydraulic vise, down feed, and bow return make production runs more efficient * Adjust the hydraulic descent pressure (depending on the material) to achieve faster cut times and longer blade life * Cutting head return position can be altered for faster cycle times between cuts on smaller pieces * Comes with heavy-duty infeed and outfeed tables for easier material handling * Patented blade tension device lets you easily set the right tension * Electro-welded steel frame provides structural strength to maintain accuracy * Compact floor plan conserves space in your shop * High-pressure flood coolant system washes away metal chips and helps blades last longer
Not Yet Reviewed
$26,399.00
TeraFlex Alpine RT coilover suspension systems are designed specifically for the JL Rubicon Wrangler, as well as for each of the Rubicon's powertrain options. For every Rubicon Wrangler powertrain, a corresponding TeraFlex suspension system has been meticulously crafted to accommodate the subtle differences among the available motor choices within the Rubicon Wrangler lineup. Alpine RT suspension systems cater to JL Rubicon factory width axles, as well as the Tera60 or other axles featuring a 3.25 in. axle tube diameter. They feature Falcon coilovers developed to meet the distinct demands of the JL Wrangler and that address the common shortcomings of coilover shocks prevalent in today's noisy coilover market. Falcon coilover shocks are meticulously designed for utterly silent operation with sealed gimble bearing shock mounts, ensuring solid and noiseless control when combined with the TeraFlex coilover mount solution and allowing full suspension cycling without any component contact. The sleek, hard-anodized bodies of Falcon shocks serve as the perfect bearing surface for the sealed and lubricated spring sliders. The sliders' roller-bearing spring seats guarantee noiseless spring movement during compression and extension, even during spring twisting. Choose the quiet performance of TeraFlex Alpine RT coilover suspension systems for your Jeep. Additional features and notes: * Race-inspired performance for increased vehicle stability * Improved dynamic roll control and low-speed damping * Dramatic improvement in on-road comfort and off-road performance * Optimized fitment for unobstructed suspension travel and articulation * 13 in. stroke, front and rear * Adjustable crossover for true dual rate * 4.5 in. lift, +/- 1.25 in. adjustability using quick-adjust snap rings * Coated, booted, and sealed oversized gimbal lock bearings mount and maintain shock orientation * JL-specific springs and shock tuning * Falcon 3.3 Series quick-adjust tuning * Designed for standard 3.0 in. springs * Refreshed speed bumps silently provide 4x the bottoming resistance * RT4 long arm suspension for control, flex, and stability * Bolt on 1/4 in. laser-cut reinforced coilover brackets
Not Yet Reviewed
$10,999.99
—
$11,659.99
Baileigh Industrial PR-403 plate rollers are durable, easy-to-use machines that will last for many years in small to medium shops. They have three hydraulically driven rolls that will handle a maximum capacity with ease and finish jobs faster. Features include: * 4 ft. forming width * 3-gauge (1/4 in.) mild sheet steel capacity * 3 hp motor runs on 220 V 3-phase power * Large planetary gearbox, connected to main motor, drives the top and bottom rolls * Industrial-grade hydraulic system drives all three rolls * Movable control pedestal includes foot pedals to run the rolling and buttons to move the forming roll up and down * Flip a switch to bring the back roll up at an angle for coning * Quick-release mechanism on the top roll makes it easy to slide off the finished work * Digital readout tracks the position of the back roll so you can make repeatable bends * Robust welded steel frame maintains accuracy and rigidity by keeping the rolls in alignment * Dual emergency stop cables are located on the front and back of the machine for safety
Not Yet Reviewed
$29,512.00
Made from 250 cast iron, the Baileigh Industrial welding jig table is made to withstand the rigors of any shop. The workbench tables are made to exact tolerances, maintain flatness of +/- 0.0025 in., and have a hardness rating of 140 to 160 Brinell.
Not Yet Reviewed
$11,246.99
Looking to increase production? Baileigh Industrial SH-8010 hydraulic compact metal shears can produce 24 strokes per minute. Built with a fully welded steel frame, the SH-8010 is packed with many exceptional features to keep production on-point and offer years of full-capacity use. Baileigh Industrial SH-8010 hydraulic compact metal shears feature: * 80 in. length * 10-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * Powerful industrial-grade hydraulics produce smooth movements that prolong blade life * 5 hp motor runs on 220 V 3-phase power * Adjustable 24 in. back gauge helps ensure repeatability * Front support arms and table guides keep the material square to the blade * Can be operated in the jog, single cycle, or continuous cycle mode when the foot pedal is pressed * Comes standard with high carbon chromium blades * Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Rigid steel plate construction minimizes flex and maintains accuracy * Covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience
Not Yet Reviewed
$24,911.99
Baileigh Industrial BS-350SA gear driven dual mitering band saws feature a cast iron head and bow that can swivel 60-degrees right and 45-degrees left. That same head and bow are machined to exacting tolerances, reduce vibrations, and deliver the straightest, highest-quality cuts on the market. Their industrial-grade hydraulic system is semi-automatic, increasing productivity, and will raise/lower the head and clamp/release the vise. With the direct-drive gearbox, there are no pulleys to adjust or belts to break—meaning the cast iron and steel construction of Baileigh BS-350SA dual mitering band saws is an investment that will pay off for years to come. Other product features and specs include: * Runs on 220 V single-phase power—so you can use them practically anywhere * Accepts a standard 1 in. blade (included) * High-torque, 2-hp motor driven by an AC inverter for enhanced reliability * Rectangular capacity (90 x 45 degrees x 45 degrees left): 13.770 x 8.660 x 9.450 x 6.300 in.; 7.300 x 4.33 in. * Round capacity (90 x 45 degrees x 45 degrees left): 10.630 x 9.450 x 6.300 x 8.280 in. * Square capacity (90/45/60 degrees): 10.240 x 8.660 x 5.900 x 7.090 in. * Adjustable speed from 66 to 280 fpm for the blade and the material, increasing the blade life and decreasing costs * Patented blade tension device (liquid-filled gauge) makes it easy to check the tension and correct it * Precision ball-bearing blade guides help you get the blade as close to the material as possible to make accurate cuts * Start and stop the machine with the convenient foot pedal and change settings on the control panel * Electro-welded steel plate framework maintains accuracy and prevents the machine from wobbling * Standard coolant flood system that washes away metal debris, cools the blade teeth, and lubricates the blade, helping it last longer
Not Yet Reviewed
$13,243.99
iDEAL 'A-Frame' Open Front Paint Spray Booths are economic, commercial-grade open front units designed to provide optimal 'airflow' with superior lighting for high-quality spray painting and finishing applications. They're a great solution for industrial batch-type and automated production-type finishing systems. Air flows through the open front section of the booth, then passes through the work area toward the rear of booth into the filtered exhaust chamber. Filtered exhaust air is then drawn through the exhaust plenum and discharged upward through the exhaust fan and ducting. The booths are easily installed with heavy-duty, precision-punched 18-gauge panels, allowing for quick nut and bolt assembly. Each booth is standard with a bright white powdercoat finish, deluxe control panel, premium exhaust filters, hinged glass light fixtures, and high-quality tube-axial exhaust fan. Features and specs: * Commercial-grade design for optimal airflow and lighting coverage * Deluxe control panel included * White powdercoat panel finish (inside and outside) * Heavy-duty, precision-punched 18-gauge panel construction * Convenient 5/16 in. bolt and serrated lock nut assembly * UL Listed Dayton 24 in. tube-axial exhaust fan with spark-resistant fan blades * NEMA rated 2 hp, 3 phase, 230/460 V AC 60hz motor standard * Premium AFC exhaust filters * LDPI industrial light fixtures with inside access hinged glass door * (2) LPDI industrial (CLS1 / Div. 2) light fixtures – UL and ETL (Groups A, B, C, and D) * True 'daylight color' with GE T8 48 in. fluorescent lamps 32 watts, 2900 lumens, 5000K * Optimal airflow with CFM 7,983 at .5 static pressure * Inside dimensions: 13 ft. wide x 8 ft. 6 in. high x 7 ft. 6 in. deep * All assembly hardware, manometer, and sealant included * Meets or exceeds all applicable OSHA and HFPA 33 regulations * Easy to install, operate, and maintain
Not Yet Reviewed
$9,050.00
Built with a plate steel carriage, the rigid and simple Baileigh Industrial SH-12014 hydraulic sheet metal shears will give you decades of dependable service. These 120 in. hydraulic sheet metal shears will allow you to cut full sheets the long way and offers three modes of the operator console: inch mode to jog the control and ease the blade down to the material, single mode to make one cut cycle per foot pedal push, and an Auto mode for continuous cycling, as you hold the pedal down. Baileigh Industrial SH-12014 hydraulic sheet metal shears feature: * 14-gauge mild steel maximum capacity * Minimum capacity of 24-gauge mild steel * 5 hp motor runs on 220 V 3-phase power * Powerful industrial-grade hydraulics produce smooth movements that prolong blade life * Up to 20 strokes per minute * Adjustable 24 in. back gauge helps ensure repeatability * Front support arms and table guides keep the material square to the blade * Comes standard with high carbon chromium blades * Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money * Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life * Fully welded steel construction helps prevent flex and maintain accuracy for many years * Covered by a 1-year parts manufacturer warranty * Baileigh stocks replacement parts, including blades, in-house for fast shipping * Includes lifetime technical support by phone from a team of reps with hands-on metalworking experience
Not Yet Reviewed
$31,074.00
With a welded steel frame, Baileigh Industrial HB-12014 straight sheet metal brakes are strong enough to bend 14 gauge mild steel across its full length of 10 ft. (120 in.). This equipment will last for years in any shop. Product details: * This industrial sheet metal bender has a maximum bend angle of 135 degrees * 10 ft. sheet metal brake is made using only the highest-quality materials * Machined bending leaf pivots ride in precision bushings, allowing for better bend tolerances and minimizing operator fatigue * 2 massive counterweights on the bending apron reduce the effort of bending at maximum capacity * One-piece bending blade, machined to perfection, achieves tight bend radiuses * Top beam depth adjusts to fit different material thickness * Comes standard with stop rod to ensure repeatability for production runs * Thick, fully-welded steel plate frame maintains accuracy and keeps the machine from buckling at full capacity
Not Yet Reviewed
$12,649.00
Elevate your truck or Jeep to new heights with Belltech's all-new suspension lift kit systems. They're precision-engineered to ensure every aspect was considered to provide you with the highest quality and best performance. Through innovative design with the focus on performance, these suspension systems are the best-riding lift kits on the market, period—built to ride, handle, and tackle off-road obstacles with ease! Here are details for Kit 152650BK: Give your truck the off-road look you desire with Belltech's new Ford Bronco Sport 1.5 in. Lift Kit. It allows the ideal amount of lift to add larger wheels to your vehicle, which not only improves its appearance and capability, but can also provide increased traction and grip while driving. This product was designed with straightforward installation, making for a quick and simplified change to your Ford. Included in the lift kit, are custom-designed, adjustable end links which are zinc coated to prevent rust. The end links ensure your OE sway bar does not make contact with any parts of your vehicle in its newly modified condition. To provide lift, the kit includes front strut spacers (which attach directly to the top of your OE front struts) and coil spacers for the rear. To maintain proper suspension geometry and keep your wheels centered within the fenders, this kit includes rear trailing arm drop brackets. All components are powdercoated to prevent rust and reduce wear. Furnish your new Ford with a unique look that will last with the new Belltech Ford Bronco Sport 1.5 in. Lift Kit.
Not Yet Reviewed
$6,201.00
On Sale
The Ranger RS-750DS parts washers have a 53-gallon tank and come with the latest features for rapidly degreasing the biggest car parts around—making it the ultimate answer to degreasing car parts of any shape or size. Built to last, these stainless steel spray wash cabinets allow for more space to fit more parts in at a time. With the extra room, you can clean and degrease automotive parts faster than ever before! Features and specs: * 53-gallon tank with heavy-duty stainless steel construction and powdercoat finish to resist rust * Commercial-grade pump/motor combination provides washing power—made of high-quality parts like the rust-resistant stainless steel impellers—while the centrifugal pump does all the heavy lifting (a protective covering comprised of 100 percent ductile cast iron and silicon carbide seals keep the machinery inside safe and dry) * Wash cabinet is sealed with a leak-proof neoprene door—creates an edge-to-edge seal and prevents water and steam from escaping to create better water retention which improves cleaning efficiency * Heated cabinet with adjustable set point thermostat allows you to adjust the heating range up to 175 degrees F * Safety switch and timer dial for a functional machine that is both safe and efficient * A nickel-based, alloy-sheathed heater element is specifically designed for heated parts washing—ensures that your parts washer is hot and ready to go at the press of a button * Contamination-proof interior welds prevents even microscopic debris from getting into the recirculating tank to help ensure nozzles and pumps remain unclogged, redirecting unwanted debris to the trap and filter * Stainless steel nozzles are resistant to wear and clogging—sprayer nozzles have a sharply articulated spray grid to provide a powerful wash, blasting away dirt and grime * Full opening octagonal door and stainless steel handles * Dual water heaters for quick startup—water temperature is raised within seconds thanks to the dual water heaters that keep water primed and ready at all times * High-power spray jets clean parts fast—attacks dirt and grime from all angles, ensuring an even powerful wash * Automatic low water shutoff feature cuts the power when the water level gets too low, saving your dual heaters from any potential damage—switch is made from an industrial-grade stainless steel float located in the detergent tank that rises and falls with the water level * Stainless steel oil skimmer—separates oil and grime from the water which further increases the longevity of your detergent solution (oil is directed outside the cabinet into a holding container for disposal) * Removable tree rack and components basket is essential for small parts and for maximizing parts washing space, the tree rack installs and removes easily instantly extending tank space and provides space for smaller parts like bolts, nuts, and screws * Convenient tank drain pipes help you maintain your spray wash cabinet by preventing debris from accumulating on the bottom * Moveable filter basket traps any particle larger than 1/8 in., so you can be sure that your tank water remains free of any build up that could cause harm and can be easily removed to gain access to the cleansing tank for maintenance * Non-marring casters make maneuvering even this bulky piece of equipment a breeze and the urethane casters ensure that your floor remains safe * Convenient drain tank—large built-in pipe drains that redirect and remove sludge from the parts washer floor, which helps keep the washer clean and functioning smoothly * A friction-drive turntable is the system behind the parts washer, and it cuts out the risk of motor damage by preventing jams that might otherwise occur within the cabinet and tank
Not Yet Reviewed
$15,895.00
$15,295.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
