Availability

2 Results Found For "dana 44 crossover high steer kit"

Individual Parts

Part Groups

Results 1 - 2 of 2

Instant Rebate

TeraFlex Jeep JT Alpine RT Hybrid Coilover Suspension Systems

TeraFlex Jeep JT Alpine RT Hybrid coilover suspension systems are designed specifically to fit the needs of the JT Gladiator, both 3.0L diesel and 3.6L gas. For each Gladiator powertrain, a corresponding TeraFlex suspension system has been meticulously crafted to accommodate the subtle differences among the available motor choices within the Rubicon Gladiator lineup. These Hybrid systems integrate front bolt-on coilover brackets and JT-specific Falcon 3.3 coilovers, ensuring a high-performance, noise-free ride. Also, the rear extended travel suspension coupled with Falcon 3.3 quick-adjust piggyback shocks allow for up to 16 in. of travel. The systems cater to JL Rubicon factory width axles, as well as the Tera60 or other axles featuring a 3.25 in. axle tube diameter, while addressing the common shortcomings prevalent in today's noisy coilovers. Falcon coilover shocks are meticulously designed for utterly silent operation with sealed gimble bearing shock mounts, ensuring solid and noiseless control when combined with the TeraFlex coilover mount solution. This unique mount design allows for full suspension cycling without any component contact. Select a TeraFlex Alpine RT Hybrid coilover system designed for your Jeep JT. Additional features and benefits: * Race-inspired performance for increased vehicle stability * Improved dynamic roll control and low-speed damping * Dramatic improvement in on-road comfort and off-road performance * Optimized fitment for unobstructed suspension travel and articulation * 13 in. stroke front coilovers * Adjustable crossover for True Dual-Rate * JT-specific springs and shock tuning * Refreshed speed bumps silently provide 4 times the bottoming resistance * RT4 long arm suspension for control, flex, and stability * Bolt on 1/4 in. laser-cut reinforced coilover brackets * Adjustable Alpine IR long arms and brackets balance front caster angle and pinion angles, as well as optimize rear pinion angles and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * TeraFlex rear sway bar included * Rear coil spring retainers prevent the springs from unseating during full suspension travel * Heavy-duty forged adjustable track bars and track bar brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling * Falcon's sleek, hard-anodized shock body serves as the perfect bearing surface for the new sealed and lubricated spring sliders * Sliders also boast roller-bearing spring seats, guaranteeing noiseless spring movement during compression and extension, even during spring twisting

Not Yet Reviewed

$10,399.99

BluePrint Builder Series 302W/365HP Bronco Edition Carbureted Crate Engine and 4R70W Trans Combos

BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition carbureted crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and forged 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller (TPS not included due to variable installations) * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Carburetor (600 cfm) * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.

Not Yet Reviewed

$18,099.00

1

Page 1 of 1