Availability
Showing In Stock Items. Show All 36 Items.
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
( 2 )
$10,868.33
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
Add some real power to your build—BluePrint Engines GM 400 c.i.d. 508 hp base long block crate engines with 6 in. connecting rods. These engine assemblies are built by skilled craftsmen utilizing BluePrint's exclusive designed and manufactured blocks. Their base units come complete with oil pans, valve covers, and front timing covers--letting you finish the engine out, your way, with fuel and ignition systems. They're also balanced, blueprinted, and dyno-tested. BluePrint Engines GM 400 c.i.d. 508 hp base crate engines include: * Cast iron block with 4-bolt mains * Compression ratio: 9.5:1 * Forged crankshaft * 6 in. forged H-beam connecting rods with 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Dyno test results shipped with engine * 30-month/50,000-mile warranty
Not Yet Reviewed
$9,399.00
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor
( 10 )
$5,699.00
—
$6,749.00
BluePrint Engines GM 350 C.I.D. 390 HP Long Block crate engines deliver 390 hp and 410 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast iron crankshaft, hypereutectic pistons, and a compression ratio of 9.2:1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 12 )
$5,049.00
Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.
( 3 )
$14,846.00
BluePrint Engines GM 383 c.i.d. 436 hp base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust lift with 230 intake/236 exhaust duration at .050 with a 110 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off.
( 25 )
$5,999.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
( 2 )
$9,949.00
BluePrint Engines GM 383 c.i.d. 436 hp base dressed stroker long block crate engines provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at.050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with 750 cfm 4-barrel carburetor. The engines also include a distributor, an oil pan, a set of valve covers, and a timing cover to finish them off.
( 14 )
$6,599.00
BluePrint Engines GM 383 c.i.d. 445 hp dressed power-adder stroker long block crate engines make strong foundations for nitrous, turbos, and blowers. Block features: * Cast iron * 4-bolt main * One-piece rear main seal * Passenger side dipstick * Mechanical fuel pump provision * Drilled and tapped for clutch linkage Rotating assembly: * Forged crankshaft * Forged I-beam connecting rods * Forged pistons Also includes: * Aluminum cylinder heads -- 64cc chamber -- 2.02 in. intake/1.60 in. exhaust valves -- 195cc intake/75cc exhaust runners * Hydraulic roller cam -- .536 intake/.555 exhaust -- 224 intake/236 exhaust duration at .050 -- 113 degree lobe separation * Oil pan * Valve covers * Timing cover * Harmonic balancer * 30-month/50,000-mile Warranty * Dyno-tested and shipped with results
( 1 )
$8,049.00
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$16,836.20
BluePrint Engines GM 383 c.i.d. 436 hp dressed stroker long block crate engines with fuel injection will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains and passenger side dipstick. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 10.1:1 compression hypereutectic pistons hung on the end. The full roller camshaft provides .544 intake/555 exhaust Lift with 230 intake/236 exhaust Duration at .050 with a 110 degree lobe separation. Up top is a dual-plane intake manifold with Holley Sniper fuel injection system The engines also include an oil pan, a set of valve covers, and a timing cover to finish them off.
( 10 )
$7,549.00
BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Long Block crate engines deliver 460 hp and 479 lbs.-ft. of torque. They feature aluminum heads, hydraulic roller cam, cast crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Stroke, Bored .060 in. over 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint CastCrankshaft 4.000 in. Stroke, 4.250 in. Bore OEM type 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty
( 1 )
$9,099.00
ATK High Performance Chrysler 360 Magnum 320 hp Stage 3 long block crate engines with EFI are perfect for a street cruiser, and offer great street ability, stock idle, and good power. Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus they are dyno-tested with your EFI system and ready to go! These Stage 3 engines with EFI set your vehicle up for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Typically ATK Chrysler 360 Magnum 320 hp complete EFI engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor * Stock water pump * Front damper * FiTech Go Street EFI 400 hp * Spark plugs and wires * Dyno test/tune
( 2 )
$5,898.99
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)
( 1 )
$7,149.00
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$12,803.20
Chevrolet Performance 7.4L 454 c.i.d. long block crate engines feature genuine Chevrolet internal parts. They are tested to ensure great performance under even the most demanding conditions. Assembly features include: * Cast iron block * Cast, externally balanced crankshaft * Cast steel connecting rods * Shot-peened and magnafluxed * Pistons * Hydraulic camshaft and lifters * Cast iron cylinder heads with oval ports * Timing cover
Not Yet Reviewed
$10,064.99
Got a 1/2 ton, 3/4 ton, or other GM pickup with a tired, sick, or broken engine? Chevrolet Performance has exactly what you need. Their 350 c.i.d. truck long block crate engines are built up from 1996-2002 style 4-bolt main blocks with one-piece rear main seals. To this, Chevrolet adds a nodular-iron crankshaft, powdered-metal connecting rods, and hypereutectic aluminum pistons. You also get power-producing Vortec cylinder heads with 1.94 in. intake valves and 1.50 in. exhausts, and 64cc combustion chambers that yield a gas-pump friendly 9.4:1 compression ratio. This combination is paired up with a roller cam that has 0.414 in. of intake lift and 0.428 in. for the exhaust. Duration at 0.050 in. of lift is 191 degrees for the intake and 196 for the exhaust, with 111 degrees of lobe separation. These long block crate engines come complete with an oil pan, timing cover, valve covers, and harmonic balancer.
Not Yet Reviewed
$6,096.99
Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm
( 5 )
$16,940.27
Clearance
ATK High Performance GM 383 Stroker 435 hp Stage 3 long block crate engines with EFI are designed for better driveability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 383 Stroker 435 hp complete long blocks consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * 4340 forged I-beam connecting rods * Forged pistons * Chromoly piston rings * Hydraulic roller camshaft * Dart SHP aluminum cylinder heads * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go EFI 4-600 hp * Spark plugs and wires * Dyno test/tune
( 1 )
$7,098.99
$5,999.50
These Chevrolet Performance LQ4 6.0L engine assemblies are designed for late model vehicles using fuel injection. They feature a cast iron block that uses aluminum cylinder heads to maximize reliability. Just add your intake manifold with fuel injection, ignition system components, and fire up one of these Chevrolet Performance LQ4 6.0L engine assemblies.
Not Yet Reviewed
$6,824.99
Chevrolet Performance 2.4L 146 c.i.d. remanufactured long block crate engines will breathe new life into your ride. They feature quality-built components for maximum durability. The long block crate engines include: * Engine block * Connecting rods * Pistons with rings * Cylinder head assembly with valvetrain * Oil flow check valves * Camshaft and lifters * Timing chain cover * Harmonic balancer, valve cover * Oil pan * Spark plugs * Water pump
Not Yet Reviewed
$6,459.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
