Filters
Skyjacker offers ADX 2.0 Adventure Series dual rate coilover long travel suspension lift kits for a variety of Jeep Wrangler applications from 2007 and up. They're available with 4, 5, 6, or 7 in. long arms. Here are product details: * First Flex Rate stage delivers a comfortable ride with the ability to flex/expand during full articulation as the suspension drops (full droop). This keeps the coil springs seated in the upper coil mount/bucket and the tires in contact with the terrain. Second Ride Rate stage only engages after compression past Flex Rate. * Front and Rear Lower Control Arm Relocation Brackets make room for Long Arm Value Flex Lower Links. Value Flex Longer Lower Links adjustability allows proper caster settings to improve handling. Formed from 2 in. O.D. x 0.250 wall DOM tubing with pressed-in OEM-style steel encased rubber bushings at the frame, and the axle mount has Rock Jock's 1 1/4 in. forged Johnny Joints. These Johnny Joints provide over 30 degrees of unrestricted flex movement in any direction. * Front and Rear Adjustable Upper Control Arms keep in phase with lower links. Replacement Front Adjustable Track Bar includes Skyjacker installed pressed-in HD OEM-style rubber bushing and an adjustable 3/4 in. heavy-duty rod end, jam nut and alignment bushings. * Front and Rear Bump Stop Spacers bolt onto the axle bump pads and keep the suspension travel safely in check. Rear extended length sway bar end links allow full articulation as the suspension drops (full droop). * Rear Track Bar Lower Axle Mount Bracket mounts directly to the rear axle housing to correct the track bar angle. Dana 44 Rear Track Bar Mount Brace strengthens the factory mount that is prone to failure. The track bar bracket and brace create better handling with less side-to-side sway. * Shocks are a key link in-between the chassis and your suspension. Front and rear damper capacity enhanced with ADX 2.0 Adventure Series Remote Reservoir Aluminum Monotube Shocks. ADX 2.0 has a race-inspired full-displaced valving system. Nitrogen charged with Internal Floating Piston Technology = Quickest Shock Reaction Time Ever. * Complete kit maintains OEM geometry angles, alignment specifications and structural strength.
Not Yet Reviewed
$5,282.94
GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire
Not Yet Reviewed
$7,695.99
—
$8,445.99
Step up the performance and capability of your truck with BDS Suspension Fox 2.5 coilover lift kits. They feature proprietary Fox 2.5 coilover shocks with or without DSC adjustment designed specifically to bolt-on performance for increased travel and the ability to soak up the roughest terrain along with smooth on-road comfort. The optional DSC (dual speed compression) adjustment tunes the high-speed and low-speed compression damping, allowing for added control on-road with the ability to easily dial in more aggressive damping for off-road. Kits also include either Fox 2.0, 2.5 Elite, or 2.5 piggyback DSC shocks for the rear, along with heavy-duty control arms and other matching components to improve stance, performance, capability, and clearance for big tires. Select the BDS Fox 2.5 coilover kit designed for your truck.
Not Yet Reviewed
$5,203.02
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
