Availability
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 364 )
$564.99
$509.99
TCI Maximizer high-torque towing converters are efficient units that put more of your engine's torque to the ground. Slippage is minimized, providing better gas mileage and as much as a 20-degree F reduction in transmission temperature. Another benefit is reduced engine rpm at highway speed. These torque converters are available in a variety of size options for more than a dozen Chevy, Ford, and Mopar transmission models.
( 20 )
$855.95
UMI Performance tunnel mounted torque arms are a proven fourth-generation setup designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage. They also work great for transmission swaps when a clamshell torque arm is not feasible. These torque arms include instant center adjustment brackets and can be purchased with or without a front driveshaft loop. They bolt into existing floor pan holes with no drilling or welding required.
( 39 )
$528.62
—
$759.99
These Maximizer Street Performance torque converters are built with extra reinforcement and thicker mounting surfaces to withstand the additional load and vibration put through the drivetrain by a truck with performance modifications. By providing additional stall, your truck will see better initial takeoff and will not lug the engine when using big tires. Special attention is made to match the converters to the power range of most trucks that do double duty as off-road and daily drivers. Improved rear-wheel horsepower and elapsed times are some of the results.
( 7 )
$786.95
These Saturday Night Specials set the standard for street performance torque converters--without the high costs. Utilizing many of the same features as more expensive torque converters, the Saturday Night Specials are fully furnace-brazed, have a new hardened pump hub, and are pressure-tested and balanced prior to shipment.
( 47 )
$624.95
—
$746.95
Are you looking for a torque arm that will stand up to your 10.50 or lower ET? Look no further. BMR Suspension Xtreme torque arms are constructed from TIG-welded 4130 chromoly tubing to take the punishment of that 8, 9, or 10-second motor, BMR torque arms provide less wheel hop for stronger performance. Additional features: * Gusseted rear mounting bracket made from 3/8 in. laser-cut plate * Solid 4130 rod eyes * Reinforced front bushing mount * Additional cross bracing
( 34 )
$529.95
—
$749.95
BMR Suspension tunnel mounted torque arms improve handling, reduce wheel hop, and add strength plus adjustability to your 4th Gen GM F-body. These packages mount the torque arm to the transmission tunnel mount instead of the transmission tail shaft, making them ideal for high-horsepower applications. The tunnel mount design removes the load from the transmission, which can damage the transmission, and puts the heavy loads of high-power cars into the chassis. The torque arm crossmember provides an adjustable mounting plate for the torque arm, while adding strength to the floor by reinforcing the transmission tunnel. Features: * Heavy-duty 1.25 in., 0.120 in. wall DOM steel tubing * Heavy-duty 1/4 in. laser-cut, CNC-formed steel plate * MIG-welded * Five mounting positions for instant center and pinion angle adjustability * Integrated driveshaft safety loop (TA011/TA012) * Increased clearance for long-tube headers/aftermarket exhaust (TA012/TA014) * Mounts to the driveshaft tunnel brace * Uses factory differential mount * CNC-machined, on-car torque arm adjuster for pinion angle * 95-durometer polyurethane front mount * Massive increase in strength over factory torque arm * Available in black hammertone or red powdercoat
( 10 )
$529.95
—
$559.95
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$529.99
—
$759.99
UMI Performance 1993-2002 GM F-Body 3-pt. subframe connectors and torque arm kits provide an easy bolt-on drag race solution for GM F-bodies. These suspension connectors reinforce the chassis and prevent quarter-panel wrinkling from hard launches; a tunnel-mounted torque arm is the proven solution to reduce 60 ft. times. Shortened torque arm improves instant center location; as a result, forward traction is improved. These kits include removable and replaceable NHRA-approved driveshaft loop. Using both parts together dramatically reduces chassis flex. Product features: * 3-pt. subframe connectors reinforce chassis and prevent quarter-panel buckling * Shorter than stock, tunnel-mounted torque arm improves forward traction * Complete kit braces entire underside of car to reduce chassis flex * NHRA approved driveshaft loop (removable and replaceable) * Includes hardware
Not Yet Reviewed
$699.99
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$701.99
BMR Suspension Trak Paks eliminate traction problems by relocating the torque arm front mount. The shorter torque arm design moves the "instant center" rearward for improved weight transfer on acceleration. BMR Trak Paks are equipped with a rear adjuster to allow on-car pinion angle adjustments for dragstrip tuning. The crossbar requires welding and professional installation.
Not Yet Reviewed
$569.95
Torque converters are considered one of the most mysterious mechanical components in today's vehicles. They function like a clutch, and keep the engine running even when the vehicle comes to a halt. By designing the stall speed to match both the engine and desired stall speed, ACC Performance converters help low-end idle speeds, improve performance, and acceleration. ACC Performance Products has emerged as an out-right leader in torque converters and here's why: * Boss Hogs are welded, not furnace-brazed; furnace brazing is not the best way to adhere torque converter components, it will erode and ruin the stators and all rotating parts * Industrial Torrington bearings handle more torque than smaller, uncased needle bearings * Aircraft aluminum washers instead of fiber washers put more horsepower and torque directly to the ground * ACC converters are hand-built and tested to ensure that you get the best converter money can buy * With returns below one percent, you are assured of the highest quality parts available * Street Bandit converters are designed to handle as much as 650 hp * Custom-engineered turbine hubs maintain the highest quality, strength, and durability * Stators are built with high-flow vents and channels for greater cooling to handle greater power and higher temperatures * Engineered with a single bolt pattern that makes ACC converters surprisingly light to free up your motor and allow it to gain rpm quicker Notes: * Boss Hog Street Bandit torque converters are not designed to handle the extreme shock and abuse of nitrous oxide or trans-brakes * It is imperative that a transmission cooler be added with any torque converter that is rated over stock stall speed
( 100 )
$609.90
Summit Bucks
ACDelco remanufactured torque converters provide the best possible solutions for your needs, and your budget. Existing units are disassembled, components most prone to wear, as well as damaged or obsolete parts are replaced with new, and all are end-of-line tested to ensure performance in your GM vehicle.
Not Yet Reviewed
$504.99
—
$676.99
Once you try RevMax ultra low stall Stage 3 torque converters, it will be clear why Revmax is known to produce the best converter on the market. The showpiece of their converters is the patented torque converter stator sprag retainer which allows smoother clutch application for less strain on the input shaft. All Revmax Stage 3 converters are rated up to 350 horsepower or 700 ft-lbs. of torque. Give your ride the powertrain it deserves with an assist from the RevMax ultra low stall Stage 3 torque converter best suited for your application. More product features, items, and specifications include: * Proprietary input shaft seal * Billet bearing cap * Dual Torrington bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace-brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak tested * TCRS machine computerized high-speed balancing to less than 5 grams * Runout tolerances of less than 0.005 in.
Not Yet Reviewed
$799.00
Summit Bucks
ACDelco new torque converters are GM OE replacements that offer the same performance, durability, and service life you've come to expect. With quality steel housings and internal components, ACDelco torque converters are sure to deliver the performance and fit needed for your vehicle.
( 1 )
$503.99
If you like American Racing's famous Torq-Thrust D wheels, then you'll love VN215 Torq-Thrust II one-piece wheels! These gray finished wheels feature a polished barrel and the same vintage 5-spoke design as the Torq-Thrust D wheels. For classic style, quality construction, and a beautiful fit, choose American Racing VN215 Torq-Thrust II one-piece wheels.
( 152 )
$639.00
These Perfection ZVT Variable Torque Performance clutches put the power to the wheels when you need it most. These clutches add clamp load by applying centrifugal force to the pressure plate as engine rpm increases. Each ZVT clutch kit is designed with consideration to your vehicles peak torque and horsepower range. Includes pressure plate, disc, throw out bearing, and installation tool.
( 1 )
$573.99
Valair Performance NV4500 13 in. conversion clutch kits allow for an upgrade in size, providing more surface area and better performance. These kits are available for both 12 and 24-valve Dodge Cummins diesels. They include a new 5-speed dual drilled flywheel, heavy-duty parts, and are designed for specific uses to best fit your needs. Get the right fit with Valair Performance NV4500 13 in. conversion clutch kits.
( 8 )
$817.54
Whether you've taken up racing, tow a lot of weight, or installed aftermarket performance parts, Valair Performance Dual Mass Conversion clutch kits will provide the extra strength needed. These assemblies include heavy-duty pressure plates, mounting hardware, and most parts needed for the swap—and they're available for a variety of vehicle and engine applications. Keep your transmission up-to-date with a Valair Performance Dual Mass Conversion clutch kit.
( 1 )
$668.16
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 608 )
$550.00
—
$790.00
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 406 )
$509.99
—
$784.99
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$605.80
—
$736.85
MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.
( 35 )
$529.99
—
$679.99
MagnaFlow PRO Series DPF diesel exhaust systems feature a muffler-less design with mirror-finish polished, welded intercooled tips. These kits feature mandrel-bent stainless steel tubing in a variety of intermediate and tailpipe diameters. The systems are available in numerous styles, including cat-back, downpipe-back, and turbo-back. MagnaFlow Stainless Steel PRO Series DPF stainless steel exhausts are designed for a wide range of make and model diesel applications to significantly enhance both horsepower and torque.
( 1 )
$548.00
—
$755.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
