Availability
Showing In Stock Items. Show All 18 Items.
Rough Country Vertex 2.5 adjustable coilovers allow you to dial-in the exact performance you need, whether it's a smooth ride for city streets or the ultimate damping for off-road mayhem, these high-performance reservoir shocks offer an elite ride-quality in every situation you face. Choose a set for your vehicle. Vertex coilovers with remote reservoir: * 8-stage adjustable damping * Monotube design * Nitrogen-charged * Steel braided reservoir line * Massive 2.5 in. piston * 22mm chrome-hardened piston rod * Specifically tuned for each application * 3-Stage Seal System * Heat-treated alloy bearing * Honed steel body * CNC-machined billet aluminum accents * Zinc plate finish with double clearcoat * 400 hour salt spray rating * 3-year Manufacturer's Warranty
Not Yet Reviewed
$499.95
BMR Suspension K-members feature a unique tubular design that will allow you to drop the weight on your front-end by more than half of the factory piece. They provide a lightweight alternative, while offering larger tubing for durability. BMR K-members also provide more clearance for aftermarket headers and turbo systems. They will work with stock or aftermarket A-arms (except where noted), providing an additional 1/4 in. adjustment, equaling up to 4 more degrees of camber.
( 25 )
$369.95
OER Authorized bolt-in IFS conversion kits are available for 1947-54 GM pickups with a V8 engine. The kits will improve your vehicle's ride, handling, and performance. These steel crossmember kits convert your antiquated stock front suspension and steering box to a more modern 1974-78 Mustang II or 1974-80 Pinto/Bobcat setup. Enjoy better handling with the addition of rack and pinion steering and twice the suspension travel when compared to stock. Combine this advancement in steering and suspension with the added benefit of modern braking power, and this setup becomes a no-brainer. The bolt-in kit is designed for use on 1947-54 Chevy 1/2 ton or light-duty 3/4 ton frames, and will drop the ride height approximately 2 1/2 to 3 in. using stock Mustang II front spindles. Lower control arm pivot tubes and gussets are not included in this kit. (A weld-in crossmember it is also available, if preferred.) Specs: * Bolt-in components. No welding required * Proven Mustang II geometry * Can use stock 1974-78 Mustang II or 1974-80 Pinto suspension components, except control arms. * Requires tubular control arms (strut-less style lowers) * Interlocking bolt-in boxing plates reinforce frame for strength * Requires power steering rack * Stock spindles will drop ride height 2-1/2" - 3 inches * Will work with small block or big block Chevy engines * Not for use with air-ride front ends Note: Additional items may be needed to complete installation, including but not limited to tubular control arms, spindles, coilover springs/shocks, rack and pinion steering, tie rods, calipers, rotors, inner tie-rod extensions. Important: Lower control arms need to be level with the ground (with all the weight on the vehicle) for correct steering geometry.
( 1 )
$405.99
Eibach Pro-Kit lift springs are the perfect performance upgrade if you're still using OE shocks and your truck or SUV is still at standard ride height. Designed to provide a suspension lift without the use of coilover systems or spacer lifts, they allow full-range suspension travel without additional stress on bushings and ball joints. These kits are engineered and manufactured using the same technology found in their championship-winning ERO Off-road race springs and carefully tested to provide unparalleled ride quality and off-road capability. Order the Pro-Lift-Kit performance lift springs designed for your application. Features and benefits include: * Developed to provide balanced ride quality, control, and off-road capability * Increased ground clearance * More fender clearance for larger wheels and tires * Precision engineered for better off-road capability * Excellent on-road stability and handling * Million-Mile warranty * Manufactured using winning off-road race spring technology
( 13 )
$275.00
—
$490.00
Save time and money with a full All-Pro Off-Road suspension kit. These kits (without shocks) are intended for those who plan on using adjustable coilovers and need to complement them with a rear spring lift and adjustable control arms. Choose between Standard and Expedition leaf springs; optional bump stops are available. Each kit comes with a pair of All-Pro tubular chromoly upper control arms, extended brakes lines, and a U-bolt flip kit. Order the model recommended for your vehicle application. Product details: All-Pro upper control arms: * Tubular chromoly upper A-arms * Arms use 1.25 in. uniballs * New flush-mount hardware and spacers * Uniball spacers are CNC-machined from heat-treated stainless steel * Polyurethane bushings with thick inner sleeves * Includes Grade 8 and high-strength 12 pt. hardware * Gray powdercoat finish * Maximum wheel backspacing: 4.50 in. All-Pro Leaf Pack (choose Standard or Expedition): * A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves * Double "military" wrap provides extra strength for the main leaf * "Torque Leaf," an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality * Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure * PTFE anti-friction pads between leafs provide smoother flex, lessen spring wear, and reduce noise * Leafs are shot-peened after forming to relieve stress * Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag * Comprehensive 12-month warranty for non-racing applications when properly installed (Note: Using a lifting block or shackle flip with the All-Pro Off-Road springs will void the warranty on the springs.) All-Pro rear U-bolt flip kit: * All-Pro Off-Road U-bolt flip kit turns the U-bolts upside down so the bolt ends face up, away from the rocks. This mod both prevents damage to U-bolt threads and increases ground clearance. The kit comes complete with new heavy-duty U-bolts, plus hardened U-bolt nuts and washers. Tapped plates are also included in every kit. All-Pro rear extended brake lines: * These steel braided brake lines are great for your lifted Toyota. The rear brake lines are 24 in. and designed for stock ride up to a 4 in. lift. U.S. DOT-approved, they exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106.
Not Yet Reviewed
$499.99
One of the best ways to improve the handling of your vehicle is with a selection from Stillen's sway bar lineup. Whether it's the first step in your suspension modification, or the finishing touch to a complete overhaul with coilovers and control arms, sway bars are one of the most important aspects of fine tuning your car's handling characteristics. Stillen sway bars will take your driving experience to the next level by dramatically improving your car's cornering, stability, and handling, giving you more confidence in your car's ability to stay firmly planted. Constructed in-house from high-strength aircraft grade steel for extra durability and powdercoated for good looks and corrosion prevention, they are available for front, rear, or in front and rear sets, adjustable or fixed with a red or black finish. Select the Stillen sways bars designed for your vehicle.
Not Yet Reviewed
$274.01
—
$515.63
Are you swapping in a new engine to your Mustang? If so, AJE Suspension Tubular Mustang K-member swap kits should be your choice to drop the engine you want under the hood of your pony. These swap kits are produced exclusively by AJE Suspension with bolt-in K-members that fit your Mustang and the necessary motor mounts to mount any engine--Chevy or Ford! First, AJE motor mounts are stronger than factory setups, so they can handle the power of your turbos and blowers. Second, their K-members are crafted from steel. They offer no bent tubes and triangulated load paths to deliver the strength that you need without adding extra weight that you don't need, as well as extra header/oil pan clearance! The swap kits also include A-arms, coil-over spring kits, and, depending on the application, caster/camber plates. One last thought--if you decide to part with your pony and keep your engine, you'll have plenty of interested parties, as the new buyer can mount any engine they choose without changing the K-member. Why waste money on K-members that mount only one family of engines? Compare price, quality, and design--you'll be ready to update your pony with the suspension technology of AJE Suspension tubular K-member complete Mustang swap kits.
( 12 )
$519.99
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 138 )
$438.48
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
