Free Shipping on Orders Over $109 at Summit Racing

Cold Case Radiator Support Module Kits

Cold Case offers radiator support module kits for a variety of applications, including 1960s era Camaro LS engine swaps. Each module comes fully assembled and ready to bolt into your vehicle. They consist of an aluminum radiator support, big 1.25 in. tube dual-core crossflow radiator, two 3600 cfm fans/shroud combination, billet cap, and billet overflow tank. These units are very popular with high-tech, high horsepower builds in which maximum cooling is a must. Available in either standard Chevrolet outlet configurations or LS outlet configurations, they're 100 percent TIG-welded and ready to paint or polish. Radiator support module features: * Extra forward design will clear big block and LS front drives * Brushed aluminum finish * 2 row design with 1.25" tubes * Includes dual 14 in. 3600 cfm fans and shroud combination setup * Easy to install even in finished cars * Optional AC condenser and electronic fan controller upgrades available

2.2 out of 5 stars ( 5 )

$2,289.54

—

$2,671.54

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 46 )

$2,895.00

Van Steel Complete Trailing Arm Assemblies

Van Steel complete trailing arm assemblies are available with factory-style T-arms (no sway bar holes) or offset T-arms with spherical bearings. Additional contents include these new components: * Rotors * Spindles * Caliper mounting brackets * Bearing supports * Backing plates * Stainless steel parking brake hardware * Parking brake shoes * Bearings, seals, and races

4.0 out of 5 stars ( 3 )

$2,229.99

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,249.99

McGaughy's Black SS Suspension Lift Kits

"Now, that's a truck!" McGaughy's Black SS suspension lift kits give your rig a "real" lift. The kits are available for 6 to 10 in. of lift to boost your truck's stance and your ego. The elite adjustability is possible with the included front struts and because McGaughy's drops the crossmember and differential a full 7 in. This keeps your CV axles' angles, suspension geometry, and steering geometry at factory specifications. To keep these performance lifts looking good, they receive a durable, glossy black powdercoated finish. Plus, the front crossmember is accented with highly polished stainless steel inlays. Install one of McGaughy's SS lift kits, and the next time you hear, "Whoa, what a truck!" it will be referring to yours! McGaughy's SS suspension lift kits may include: * Lift spindles * Adjustable front struts or extenders * Crossmembers * Lower A-arm support rods * Tie rods * Sway bar drops and extenders * Skid plate * Fabricated lift blocks * Bump stop extenders * Brake line extenders * Rear shocks or extenders * U-bolts and necessary hardware

5.0 out of 5 stars ( 2 )

$2,832.99

—

$3,299.99

McGaughy's Suspension Lift Kits

Give your rig a lift—via McGaughy's suspension lift kits! Their key components feature a brilliant gloss metallic silver powdercoat for longevity and durability. Installation is easy with minimal drilling; no re-routing of the exhaust, or cutting or grinding on the front or rear differential is necessary. This equipment is CNC-formed, machined, and laser-cut in-house from the highest grade materials. The spindles are CAD-designed for a perfect and accurate fit. Complete kits include the lower A-frame support rods, along with compression struts to add extra support and prevent the front and rear crossmembers from flexing. Dozens of kits are available for vehicles from the 1990s and up. Choose the style, lifted height, and other options recommended for your application; then elevate your rig to a higher stance with McGaughy's suspension lifts.

4.4 out of 5 stars ( 10 )

$2,289.89

—

$3,838.99

Fleece Performance Cheetah FMW Turbochargers

Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.

3.0 out of 5 stars ( 2 )

$2,699.00

—

$3,099.00

QA1 Mopar Rear Coilover Conversion Systems

Upgrade your classic Mopar A, B or E body car to a triangulated four-link design with QA1's Mopar rear coilover conversion systems. These QA1 conversion systems will transform the way your classic Mopar launches, handles, and cruises down the road! The great-looking powdercoated components improve performance and save weight—plus, you'll enjoy a much more modern driving feel and improved handling in any setting. Order QA1's Mopar rear coilover conversion system for your application. Additional features: * Proven triangulated 4-link design is popular with street/strip machines, pro-touring/road racers and autocross drivers * Available for Mopar 8 3/4 in., Ford 9 in. and Dana 60 rear axles * Improved traction during launch * Easy installation that requires minimal welding * Supports both standard and inboard spring locations * Gain greater anti-squat and pinion angle adjustability * Correct your wheelbase to fit larger wheels and tires * Has clearance for 3 in. over the axle exhaust * Single- and double-adjustable shocks eligible for limited lifetime warranty by the manufacturer * You can add the optional rear sway bar to further reduce body roll during hard launches and cornering * Made in the USA

4.5 out of 5 stars ( 2 )

$2,383.95

—

$3,660.95

Ford Performance Parts Half Shaft Upgrade Axles

A must for your 2015 and later model Mustang—Ford Performance Parts half shaft upgrade axles deliver a robust drivetrain solution to support the higher torque loads of your power-producing muscle car. These better-than-stock performance shafts feature larger diameters, proprietary materials, and CNC-machining—which makes them a stronger and healthier option for your high-powered, sticky-tire-running machine. And with their anti-wheel hop technology, your Mustang will surely put its power to the pavement. Factory half shafts can't handle the additional stresses of your modified ride; for optimum performance, install the Ford Performance Parts half shaft upgrade axles designed for your submodel.

5.0 out of 5 stars ( 2 )

$2,274.99

March Performance Revolver Serpentine Conversion Kits

March Performance revolver serpentine conversion kits feature a solid one-piece bracket that provides rigid support for the alternator and power steering. A separate, low-mount driver side bracket allows for the option of power steering or no power steering. The March Performance revolver serpentine conversion kits feature a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. As a result, these kits display a much cleaner appearance.

3.7 out of 5 stars ( 10 )

$2,002.99

—

$3,119.99

American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits

American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness

5.0 out of 5 stars ( 1 )

$3,995.95

—

$4,559.95

Westin HDX Heavy-Duty Grille Guards

Toughen up your vehicle while adding a sporty look. Westin HDX heavy-duty grille guards provide your truck with maximum protection and eye-catching style. They feature a full-metal mesh punch plate grille, heavy-duty rubber strips to keep from scuffing up your body panels, and one-piece welded uprights for additional support. Some models also include headlight guards. These units are available in steel or stainless steel—with a variety of finish options. All Westin HDX heavy-duty grille guards are custom-designed for proper vehicle fitment.

4.38 out of 5 stars ( 13 )

$2,006.99

—

$2,621.99

MagnaFlow xMOD Series Performance Exhaust Systems

MagnaFlow xMOD Series performance exhaust systems offer unrivaled exhaust performance! These revolutionary, fully modular exhaust systems will allow you to easily personalize and fine-tune to the power and sound you want. They also offer the benefits that MagnaFlow premium exhaust is known for—lifetime warrantied stainless steel construction and dyno-proven performance featuring straight-through mufflers and fast-flowing mandrel bent pipes. Together with the xMOD modules and deletes that provide configurable flow and sound levels, your vehicle's exhaust moves to the next level with support for your present—and future power needs. The power and sound is yours with MagnaFlow xMOD Series premium performance exhaust systems. MagnaFlow xMOD Series features: * xMOD muffler modules offer MagnaFlow's proven straight-through design and race-bred quick-release V-band clamps for quick installation and removal for when you want that race car sound, instead of the deep, aggressive signature MagnaFlow exhaust note * xMOD xTreme deletes are equipped with the same quick-release V-band clamps allowing for the removal of the muffler modules for that xTreme sound experience. Use of the xTreme deletes is recommended for track use only. * Opti-Flow modules feature a fast-flowing mandrel-bent stainless steel design optimized for stock power, plus minor modifications * xTreme Flow modules feature increased flow capacity mandrel-bent big bore design for big power modification support

5.0 out of 5 stars ( 1 )

$2,742.00

—

$4,898.00

QA1 Standard Width Ford 9 in. Rear Axle Housings

If you are already running one of QA1's 4-link suspension kits on your classic car, get ready to take your build to the next level with their custom 9 in. rear housings engineered to integrate seamlessly with your existing QA1 setup. Designed for enthusiasts looking to improve performance and durability, QA1 Standard OE width Ford 9 in. rear axle housings are perfect upgrades for handling more horsepower and aggressive driving conditions. They are designed to bolt seamlessly to your QA1 4-link system, with fully formed trailing arm brackets that minimize flex under heavy loads, enhancing strength and rigidity. Whether you're increasing horsepower or seeking a more durable rear-end solution, these custom QA1 9 in. rear housings deliver the performance gains you need. Select the kit designed for your vehicle. Features: * Fabricated center section engineered for maximum strength and durability * Formed trailing arm brackets ensure your suspension remains rigid * Heavy-duty 3 in. O.D., 1/4 in. thick wall axle tubes provide the durability needed for high-performance applications * 31-spline 1541H alloy axles support up to 650 hp, with the housing handling up to 800 hp * Standard 5 x 4 3/4 in. bolt pattern for a wide range of wheel options * Durable semi-gloss powdercoat finish offers long-lasting protection and a clean, sleek look * Drain plug, fill plug, and jack pad come standard to make service a breeze * Includes T-bolts and housing studs for assembling axle shafts and installing third members * High-quality roller bearings for smooth operation and long-lasting reliability

Not Yet Reviewed

$2,099.95

BTR HyperDrive Front Drive Kits

The wait for the best possible Front Engine Accessory Drive (FEAD) kit is over! BTR HyperDrive systems offer the latest advancement in cost-effective, but premium drive systems that give you more features for less. These comprehensive kits deliver a clean, professional appearance with everything you need--adapters, gaskets, belt, thermostat, water and power steering pumps, hardware, and pulleys. All you need to add is your plumbing and wiring. Select a BTR base or SFI HyperDrive front drive kit designed for your engine. Features, benefits, and more: * Compact, clean, and efficient packaging lets you focus on your engine, not your accessories * Bracket-less design means less clutter, less fasteners, less total parts for an easy clean look * Comprehensive true black components and hardware for a clean look, and also available with billet pulley and tensioner dress-up kits * Base kits include a genuine Dayco Power Bond damper/pulley * SFI kits use an authentic ATI damper and BTR anodized billet crank pulley * Engine swap friendly in every way: -- Super compact design keeps accessories out of most frame rails, suspension components and steering setups -- 3-position clockable lower radiator hose connection -- Shorter radiator and heater hose barb connections for easier hose routing in tight applications -- Machinable area on water manifold to relocate heater hose lines downward for added clearance * Not just for looks: -- SFI/Race-ready kits available -- All kits allow for temporary or permanent A/C and/or P/S deletes with simple belt swaps, if desired -- Performance designed accessories are all high-rpm 6,500+ ready -- LS, LT, LV, and L8T application support (except LS/LT dry sump and supercharged) * Premium BTR accessories: -- OEM-quality LT cartridge-style BTR water pump utilizes a "mechanical" seal for long life, and superior sealing at high rpms -- USA-made 150-amp BTR alternator provides high idle amperage through its square wire hairpin design -- Aluminum BTR Saginaw Type II power steering pump is the latest ball bearing design and features a baffled fluid reservoir -- SD7-type BTR mini-A/C compressor is a high efficiency 7-piston with amazing durability and high-rpm resilience

Not Yet Reviewed

$2,133.99

—

$3,098.99

ATK High Performance Chevy LM7 383 Short Blocks

ATK Chevy LM7 383 short blocks support your build with a solid foundation. Produced for the 1999-2007 trucks, LM7 engines are very popular engines to swap into musclecars and other LS swap vehicles. ATK High Performance Chevy LM7 383 short blocks are built for naturally aspirated engines up to 700 hp. Your ATK LM7 engine may include these components for optimal performance: * Block: GM LM7 5.3L * Bore/stroke: 3.903 x 4.000 * Displacement: 383 cu. in. * Crankshaft: K1 4340 forged steel, internally balanced 24-tooth * Connecting rods: Scat Premium Pro 4340 forged I-beam with ARP 8740 bolts * Pistons: Wiseco 2618 forged aluminum with coated skirts * Piston rings: Wiseco GFX (alloy steel top ring) * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Brass installed and sealed * Oil galley plugs: installed and sealed * Weight: 285 lbs.

Not Yet Reviewed

$4,098.99

Clearance

Trackspec Trackday Series Bolt-In Roll Bars

Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware

2.0 out of 5 stars ( 1 )

$2,049.99

On Sale

BD Diesel Screamer Turbocharger Manifold Packages

BD Diesel Screamer turbocharger/manifold packages look stock and install like stock, but is anything but stock! Screamer features a larger ballistic billet compressor wheel and BD's exclusive Low MOI QST turbine wheel, resulting in reduced backpressure, quicker response, increased efficiency, and increased turbine flow compared to the competition. The outcome is increased maximum potential power output, right up to 690 hp with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. BD's Screamer turbocharger is perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity. Order the package designed for your truck. Key turbo features: * Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel * QST turbine wheel has a 15 percent reduction in MOI (moment of inertia) which results in quicker turbo response * QST turbine blade thickness decreased by 25 percent allowing for higher turbine gas flow and increased efficiency * Each actuator is calibrated and tested prior to shipping * VSR high-speed balanced Manifold features: * Thick-wall casting resists high-heat cracking and leaks for long-term durability * Full EGR compatibility for easy fitment

Not Yet Reviewed

$3,766.95

$3,390.26

TMI Pro-Series 60 in. Solid Back Bench Seats

No longer will you have to waste your time and money trying to repair worn-out factory seat frames and re-cover them with inferior foam and ill-fitting upholstery. TMI Pro-Series 60 in. solid back bench seats come fully assembled and are 100 percent ready to bolt in with the appropriate mounting brackets. These TMI replacement bench seats are universal to fit most applications, and offer classic styling with modern materials for exceptional support and comfort. They are available in premium materials in many colors with stitching options. Select the options to match or complement your vehicle's interior.

Not Yet Reviewed

$2,056.00

OTC Truck Dual Wheel Dollies

OTC truck dual wheel dollies remove, transport, and replace dual wheel and tire assemblies without strain or struggle. Features: * 1,500 lb. capacity * Swivel casters, 3 1/2 in. front and 3 in. rear, provide easy maneuverability * Floor space is 43 in. by 42 in. * Hydraulic jack provides over 6 1/2 in. of lift and tilts wheel assembly 7 degrees to prevent damage to wheel seal * 6 ft. support chain to hold load in place

Not Yet Reviewed

$2,202.99

United Pacific Door Shells

United Pacific offers door shells for 1932-1934 Ford Trucks that include the outer skin and inner support to help bring your American icon back to life. Every detail of the original door shells accept the original door latches, window regulators, window guides, and glass, including holes for the door handles and door lock provisions, where applicable. Each door also receives a protective EDP coating, making United Pacific door shells ideal for replacing damaged original doors. United Pacific door shells are available in driver or passenger side applications. Select the model suited to your needs.

Not Yet Reviewed

$2,356.46

Trail-Gear Rock Assault 9 Front Roller Kits

Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit

Not Yet Reviewed

$4,299.99

Fab Fours Vengeance Series Pre-Runner Bumpers

For a strong, tough looking bumper that's equipped to hold LED lights—and doesn't require heavy-duty springs under the truck to hold it—consider installing a Fab Fours Vengeance Series Pre-Runner. These 11-gauge steel plate bumpers are designed with an integrated housing to fit a 20 in. light bar, as well as mounts at the outer edges of the bumper for up to two small LED cubes per side. Pre-Runners have angled cuts on the ends for optimum tire clearance, open slots near the frame rails for use with Hi-Lift style jacks, and steel mesh-covered cutouts for increased airflow. Their high and tight design, combined with 2 in. main tube and 1.750 in. supports, provides excellent protection while reducing excess weight. They're available in either a 2-stage black matte powdercoat or bare steel finish. Jeep JK models are designed to be used with factory tow hooks. Models with sensors were tested on 6 in. lifted vehicles. Fab Fours Vengeance Series Pre-Runner bumpers not only look wicked, but allow for a full spectrum of lighting.

5.0 out of 5 stars ( 1 )

$2,365.58

—

$2,569.99

GForce Outlaw Axle Shafts

High-horsepower and stock axles are fine if you're sitting in neutral and revving the engine, but foot-pounding acceleration requires Gforce Outlaw axle shafts. These direct bolt-in axles feature anti-wheel hop technology for smoother launches, powdercoating for corrosion resistance, and extremely strong CNC-machined one-piece outer and inner billet stubs. Their proprietary aerospace billet alloy shafts use large 31-spline axle bars and 31-spline severe-duty CV joints, enabling these IRS axles to support awe-inspiring performance! Outlaw CVs produce greater travel and operating angles than OE joints, helping to keep tires on the road instead of loitering in outer space. All axle assemblies are hand-built in the USA with premium materials. Order the model recommended for your application.

5.0 out of 5 stars ( 2 )

$2,399.00

—

$2,499.00

61 Results Found For "support"