Availability
Showing In Stock Items. Show All 25 Items.
Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.
( 9 )
$1,631.58
Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
( 2 )
$1,799.95
—
$1,899.95
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,014.00
Centerforce TRIAD XDS clutch kits supply triple disc clutches developed for vehicles requiring a holding capacity of 500 to 1,200 ft.-lbs. of torque at the crank. For superior clamp load the billet pressure plates feature their patented centrifugal weight system (where applicable), while the patented ball bearing-actuated pressure plate (where applicable) provides light pedal effort. TRIAD XDS disc packs are equipped with metallic friction material for increased holding capacity and they are available in either sprung or solid hub styles, depending on application. The clutches are equipped with lightened billet steel flywheels providing low inertia, resulting in quicker rpms. Centerforce TRIAD XDS clutch kits may feature: * No complicated setup or adjustments * 8.75 in. diameter designed to lower inertia for heavy track use * Centrifugally assisted diaphragm to increase holding capacity with rpm * Solid hub design offers light weight and quick shifts * Patented multi-disc floating disc and drive disc designs * Holds 500 to 1,200 ft.-lbs. of torque at the flywheel * Patented ball bearing pressure plate * Specification card * Excellent driver control * Positive drive floater * Precision-balanced * ARP fasteners
Not Yet Reviewed
$2,309.95
XClutch Motorsports clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Select the kit for your application needs. XClutch 7.25 in. motorsport range is designed to provide a lightweight, high torque capacity solution for race vehicles such as used in time attack racing. The kits are available in single disc, twin disc, triple disc, and quad plate with a ceramic friction material, and are popular in high horsepower vehicles that use sequential gearboxes, and the lightweight design improves engine response. XClutch 7.25 in. race clutch range is ideal for drivers wanting a strong, high performance race clutch without having to compromise on quality. These kits are designed for high revving circuit or time attack applications and offer quick shift times and a lightweight construction. XClutch 8 in. range is designed to suit a wide range of vehicles commonly used in motorsport applications. As the clutch of choice for many club level racers and drifters around the world, these kits offer a great balance between torque holding capability, and heat capacity. These kits are available in both single and twin disc configurations. XClutch 9 in. range are one of their most adaptable kits for performance upgrades and conversions. They are available in organic, ceramic and carbon and offer exceptional torque capacity for high powered vehicles. The twin disc organic range is ideal for high horsepower street use, whilst the ceramic and carbon options are focused on track use where a higher heat capacity is often required.
Not Yet Reviewed
$2,220.98
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!
( 15 )
$1,519.95
—
$1,899.95
Whether it's to turn heads, sling mud on a path less traveled, or simply to get extra clearance for those bigger tires, Rough Country M1 suspension lift kits offer amazing off-road performance at an incredible value. They are easy to install, and each kit includes the specific heavy-duty components and hardware needed for your truck's lift, plus Rough Country M1 shocks. Select the kit designed for your truck with the lift desired. M1 shock features: * 2 in. seamless extruded tube * 46mm digressive piston * Self-adjusting, deflective-disc independent rebound and compression * 18mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm monotube design ensures consistent, fade-free performance in all conditions * Digressive valving instantly reacts to changing surface conditions * Zinc plated for resistance against harsh elements * Durable vulcanized natural rubber bushings
( 1 )
$1,639.95
—
$1,959.95
Rough Country V2 suspension lift kits offer your vehicle a more commanding presence with a more aggressive stance and a smooth factory-like ride. These suspension kits provide everything needed to lift your vehicle, giving you increased ground clearance to run larger tires while reducing the nose-down factory look. The kits feature Rough Country's V2 monotube shocks delivering incredible ride quality and performance. Choose the lift kit designed for your vehicle. V2 shock features: * Monotube design * Internal floating piston * Nitrogen-charged * 46mm high-flow piston * Fast heat dissipation * 36kN tensile strength * Mounts inverted * T6061 brushed aluminum body * 3-year Manufacturer's Warranty
( 1 )
$1,519.95
—
$1,939.95
Trail-Gear Trail-Creeper 4.70 single transfer cases can be installed as replacements for your stock gear-driven case or combined with crawl boxes to create dual transfer cases. TG Trail-Creepers feature a 4.70 low-range gear set in fully rebuilt and inspected cases. They have triple-drilled flanges installed on both front and rear outputs and are available with 21 or 23-spline input gear, plus a choice of shifter options. All models include Trial-Gear Trail-Safe T-case output seals installed.
( 2 )
$1,999.99
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$1,596.99
—
$2,280.95
Are you tired of excessive cabin drone? Good news! Borla took your criticisms to heart and developed a new Sport system, the S-Type II Cat-Back exhaust systems, a mid-range sounding system that's not too loud and it's not too quiet. The S-Type II still employs all the same great qualities of Borla's Sport (also known as Stinger) but without annoying, obnoxious cabin drone.
( 5 )
$2,266.99
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
( 25 )
$1,653.99
—
$1,655.99
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 155 )
$1,653.99
—
$2,106.99
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 539 )
$2,198.99
—
$2,293.99
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 245 )
$2,162.99
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$1,552.99
Introduced in the early 1980s, the Tremec T-5 has become a highly evolved, extremely compact, and versatile 5-speed manual transmission. In its rich history, the T-5 has been installed as original equipment in pickup trucks, SUVs, and performance automobiles. Today, the T-5 is available in its best form to date—sometimes referred to as "world class" or Z spec (from Ford's part number 7003Z). It has a 2.95 first gear with .63 overdrive, hardened gears, short throw factory shifter, steel front bearing retainer, tapered output shaft bearing, and a seven tooth-drive speedometer gear. Best of all, the T-5 transmission has a torque rating of 300 lbs.-ft., making it a perfect option for any moderate powered hot rod, street car, or kit car. Additional details: * The most compact Tremec transmission available, making it a "go to" for projects with limited space * At 75 lbs. dry, it's attractive for weight-conscious builds * Excellent drivability is achieved with light shift effort and smooth, positive shift quality * Its .63 overdrive provides exceptional fuel mileage * Popular choice for weekend cruisers, street-rodders, and kit car enthusiasts
( 7 )
$2,000.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
