Availability
Showing In Stock Items. Show All 21 Items.
Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.
( 9 )
$1,345.03
—
$1,631.58
Introducing the new Centerforce SST (Solid Street Twin) clutch and flywheel kits—engineered and developed for vehicles producing 400 to 925 lbs.-ft. of torque. The SST discs utilize solid hubs to reduce the rotational weight on the input shaft for quick clean shifts. The discs in the assembly are built using high-quality friction materials, for smooth engagement and longevity. These SST clutch and flywheel kits feature a lightened billet steel flywheel, providing low inertia resulting in quicker rpm and the Centerforce anti-rattle system to reduce floater rattle/noise. In addition, no complicated setup or adjustments are required, just bolt in the clutch and flywheel kit application you need—and "get a grip"! For streetcar enthusiasts looking for a high-quality Twin disc clutch system, the Centerforce SST clutch and flywheel kits are an economical choice. Key features and benefits: * Positive drive floater * Easy pedal * Precision balanced * Smooth engagement * Spec card included * ARP hardware * Solid hub for light weight and quick shifts * Simple install
( 6 )
$1,259.95
—
$1,396.95
Holley offers complete T56 transmission installation kits for a variety of engine applications. These kits come complete with everything you need to bolt a GM-style Tremec T-56 or Magnum transmission to almost any Gen III or Gen IV small block Chevrolet engines with a 6- or 8-bolt flywheel. Built with a mixture of Holley's best brands, including Lakewood and Hays, each kit includes a bellhousing, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, roller pilot bearing, and all hardware needed to install these components. * Kit 319-510 is set up to be used with the 6-bolt flywheel LS engines, which are the majority of the Gen III and Gen IV engines produced before 2009 (LS1, LS2, LS3, LS6, LS7, LM7, LQ9, L33, and similar truck engines). * Kit 319-511 is set up to be used with the 8-bolt flywheel LS and Gen V LT engines that come after 2009 (LSA, LT1, LT4, L83, and similar truck engines). Product features: * Lightweight cast aluminum bellhousing and stamped steel dust cover provides factory-like installation and appearance * Billet steel flywheel for light weight (28 lbs.) and additional strength * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * 26-spline, 12 in. organic sprung clutch offers superior clamping force and smooth engagement for engines up to 550 naturally aspirated horsepower (500 with power adder) * Adjustable hydraulic release bearing offers reduced pedal effort and easy installation * Works with original equipment or MSD high torque starters * All hardware included (flywheel, transmission, and engine connections)
Not Yet Reviewed
$1,449.95
ReadyLift Suspension lift kits provide front and rear lift solutions to boost your vehicle's stance. They offer a huge selection of kits to give your truck, Jeep, or SUV just the right posture and attitude you are looking for. ReadyLift SST (Smart Suspension Technology) lift kits are the original mid-lift solutions for those who want more than what a leveling kit offers, but less overall height than that of a big lift. And for those of you wanting that BIG lift, they have complete kits that provide maximum lift and aggressive style. So whether you want a little or a lot, "Just don't lift it … ReadyLift it!"
( 2 )
$1,469.95
Rough Country offers N3 Series suspension lift kits for thousands of trucks from the late 1960s and up—including models from Chevrolet, GMC, Cadillac, Dodge, RAM, Ford, Jeep, Toyota, Nissan, and Mazda. Depending on the application, these kits enable you to raise the front and/or rear of your vehicle anywhere from 1.5 in. to 7.5 in. This is accomplished via a variety of lift component options, such as steering knuckles, torsion bar keys, spacers, strut kits, A-arm brackets, coil springs, leaf springs/blocks, upper control arms, Add-a-Leaf, and shackles. Suspension lift kits provide many benefits, including an aggressive stance, a clean level look, increased ground clearance, and plenty of ride height to accommodate larger tires. Rough Country kits feature front and/or rear N3 nitrogen-charged shocks for incredible ride quality on- and off-road. Most kits are 100 percent bolt-on, requiring no cutting, drilling, or welding. Enhance your rig with all-new stature; order the lift kit recommended for your truck!
( 15 )
$1,199.95
—
$1,499.95
Whether it's to turn heads, sling mud on a path less traveled, or simply to get extra clearance for those bigger tires, Rough Country M1 suspension lift kits offer amazing off-road performance at an incredible value. They are easy to install, and each kit includes the specific heavy-duty components and hardware needed for your truck's lift, plus Rough Country M1 shocks. Select the kit designed for your truck with the lift desired. M1 shock features: * 2 in. seamless extruded tube * 46mm digressive piston * Self-adjusting, deflective-disc independent rebound and compression * 18mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm monotube design ensures consistent, fade-free performance in all conditions * Digressive valving instantly reacts to changing surface conditions * Zinc plated for resistance against harsh elements * Durable vulcanized natural rubber bushings
( 1 )
$1,339.95
—
$1,359.95
Early GM trucks all came with 6-lug axles. Not only does this limit your wheel choices, but it restricts your options on brakes as well. Hurst axle conversion kits offer a solution. The axles in these 5-lug conversions are made from 1541H alloy for supreme strength and durability. The kits are designed for the 8.875 12-bolt rear-end with the axles featuring 30 spline ends, a 5 x 5 in. lug pattern, and have a 30 3/4 in. length. Choose the kit for your year truck and always look to Hurst Engineering for your truck axle needs. Features: * Complete kit includes limited slip differential making installation a breeze * Heat-treated, high-quality 1541H alloy for strength and durability * 30 Spline and 30 3/4 in. long for a direct replacement * 5 x 5 in. lug pattern * Fits 8.875 in. GM truck 12-bolt * Kits include axles, limited slip differential, and drum brake assemblies
Not Yet Reviewed
$1,149.95
Flaming River tilt column shift steering columns feature large tube diameters and compact shrouds to create a unique custom look. Available in a variety of styles, lengths, and shaft sizes, they come complete with a gearshift knob, billet dress up kit (tilt, turn signal lever, and hazard knob), GM wiring (4 1/4 in. connector), and removable 12-position linkage arm. The columns are manufactured from high-quality 304 grade stainless steel, will never rust, and are available in a variety of finishes—including a paintable mill finish, black powdercoated, spray chromed, or polished to a high luster. Mill finish columns are shipped chemically clean and can be painted to match or highlight an interior with only minor preparation. A combination neutral safety switch/back-up light (sold separately) must be ordered with the column, except for select models that include a switch. Select units include an integrated ignition key located at the 3 o'clock position, with no welded-on attachments or extra relays required. These columns are complete with a key assembly, wiring, and ignition switch. Columns are offered with or without illuminated gearshift indicators. Have an overdrive automatic transmission? No problem; order the optional gearshift indicator overdrive lens (sold separately). Flaming River tilt column shift steering columns are available in universal and vehicle-specific models.
( 45 )
$1,040.99
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$1,596.99
—
$1,683.95
Whiteline GS1 Grip Series 1 kits activate more grip for more performance. These suspension packages feature Whiteline signature front and rear adjustable (where applicable) sway bars, drop links, and performance lowering springs. Outfit your car with the ultimate entry level suspension upgrade that offers more handling, comfort, and performance—Whiteline GS1 Grip Series 1 kits. Order the kit designed for your vehicle application.
Not Yet Reviewed
$1,155.88
—
$1,157.88
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 245 )
$1,430.99
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
( 25 )
$1,653.99
—
$1,655.99
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
( 26 )
$1,552.99
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 155 )
$1,653.99
—
$1,720.99
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 931 )
$1,224.99
—
$1,338.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
