Availability
Trail-Gear is the first in the industry to develop a series of Tacoma Solid Axle Swap (SAS) kits that are complete, user friendly, and affordable. They offer several different Tacoma SAS kits to allow you to pick the kit that is best suited and priced for your unique build. Every Tacoma component in these Trail-Gear solid axle swap kits has been engineered for maximum durability and tested using the most advanced engineering technology in the industry. With the full color, in-depth installation instructions, anyone with minimal mechanical and welding skills can install these kits in one or two weekends. All gussets and frame supports are included, so your Tacoma will be much stronger when you finish than it was from the factory. Built by Tacoma owners for Tacoma owners, if you have any questions you can call Trail-Gear's technical support line with confidence in knowing that you will be speaking with a fully trained professional, who will assist you with any questions that you may have during your installation. Trail-Gear Tacoma Solid Axle Swap SAS "C" kits: * Front spring hanger * All spring and shackle bushings * Shock hoops * 5125 Bilstein shocks * Frame tube jigs * Frame tubes * Shackle mount kit * Front frame reinforcement plates (with IFS box mount kit incorporated) * Steering shaft * Steering couplers * Fire wall plate * Bump stop kit * Heavy-duty front leaf springs * Front extended brake line * Fully loaded left and right calipers * Left and right caliper hard lines * Vented brake rotors * Knuckle service kit with wheel bearings * U-bolt flip kit * Tacoma high-steer kit (regular high-steer kit for 1979-85 solid front axles) * Fully loaded Six Shooter knuckle kit * Knuckle hardware * 1986-88 IFS steering box * Oil pan kit (2.7L or 3.4L) * Power steering hose conversion kit * Single t-case crossmember * Full color installation instructions * Rock Assault front axle housing * Rock Assault steering stops * Dirty 30s 30-spline Birfield/axle kit * Assembled high-pinion 3rd member * Your choice of a Detroit or ARB Locker Note: Compressor is included in Kit C with ARB Locker.
Not Yet Reviewed
$7,999.99
Diesel trucks are designed for towing heavy loads. If your rig is running 500 to 650 hp, then Valair Performance Quiet Street Dual Disc clutch kits are the way to tow. They feature tough heavy-duty parts, strong pressure plates, and a nodular iron flywheel. These kits are not intended for racing or competition use. Quiet clutch kits eliminate floater plate rattle when the clutch is pressed in, but gear rollover noise is inevitable when changing to a solid mass flywheel. It's often heard when the vehicle is under load at low rpm or idling, and it sounds like marbles in the transmission. Please educate yourself before purchase. Towing is tough on your vehicle—keep the pressure high and the shifts solid with a Valair Performance Quiet Street Dual Disc clutch kit, available for a variety of specific transmission applications.
( 9 )
$1,415.20
—
$1,631.58
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
—
$1,599.99
Strange 12-bolt bolt-in rear-ends with heavy-duty posi and leaf spring mounts are custom-made to your specifications. Details: * Factory or custom widths available * Choice of housing ends and leaf spring mounts * Professionally welded and assembled * Crated to protect your investment Information required: * Factory bolt-in * Year, make, and model of vehicle * Factory / Custom width (specify) * Mounts: Single leaf / Multi leaf / Other (specify) * Type of brakes: OEM Drum / Aftermarket * If aftermarket, specify manufacturer and part number * Bolt circle and stud choice * Gear ratio Assembly includes: * 12-bolt housing with leaf spring mounts installed * 30-spline alloy axle package * 4 1/2 in., 4 3/4 in., or 5 in.″ bolt circle * Choice of press-in or screw-in stud kit * Standard gear set * Eaton HD clutch style posi * Choice of gear ratio * S-Series pinion yoke * Pinion yoke U-bolt kit * Chrome steel cover * Bottle of friction modifier (clutch units only) * Fully crated
Not Yet Reviewed
$3,033.99
Valair Performance Street Dual Disc clutch kits are designed for the street warrior who occasionally tows lighter loads (like a ski boat)—or the heavy towing rig with up to 550 hp. These two distinctive kit styles are each constructed from high-quality parts for excellent service. Dual discs have a wider range and greater holding power than singles, yet with similar driving characteristics. Street Dual disc kits come complete with important items like a new flywheel, pressure plate, and throwout bearing. Models are available for specific vehicle applications from the 1990s and up. Put extra power to the ground with a Valair Performance Street Dual Disc clutch kit.
( 7 )
$1,111.11
—
$1,397.66
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$2,594.99
—
$2,974.99
FTI Performance Pro Powerglide Level 5 transmissions are an unbreakable unit in an SFI-approved case. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, these trannies are hand-assembled by one builder, so each clearance is set to exacting tolerances. The transmissions house the greatest advances in powerglide racing technology, and they're designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 1500 advertised horsepower rating * Protree transbrake 250 lbs. * Lightened steel clutch hub * 1.80 straight cut planetary * Vasco input shaft * 8-clutch drum * Red race clutches * High-flow pump * 4340 output shaft
( 3 )
$4,899.00
Racing is for pros--FTI Pro Series Powerglides! Their Level 4 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 4 Powerglides are designed and built for serious racers, that not only need value, but demand dependable, consistent performance while handling the rigors of their high performance engine--in any environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 4 transmissions feature: * 1.80 straight-cut gear planetary * 300m hardened input shaft * Steel clutch hub * 6-clutch drum * Aftermarket SFI-approved case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Red race clutches
( 1 )
$4,699.00
Bracket racers live and die by consistency. FTI Performance Bracket Series Powerglide Level 4 transmissions are durable, lightweight, and efficient automatic transmissions. They're engineered with an aftermarket SFI-approved case and spiral springs that don't creep when the brake is set—a must in today's racing world. Every tranny is machined in-house and hand-assembled by one builder to ensure that every clearance is set to precise tolerances. These transmissions house the greatest advances in racing technology. Other features include: * 1100 hp * Bracket tree transbrake * Steel clutch hub * 1.80 straight cut planetary * 300M input shaft * 6-clutch drum * Red race clutches * High-flow pump * Deep aluminum pan
Not Yet Reviewed
$4,699.00
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 64 )
$699.00
—
$799.00
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,425.00
—
$1,859.00
Racing is for pros--FTI Pro Series Powerglides! Their Level 3 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 3 Powerglides are designed and built for racers on a budget that need an unbreakable unit that can handle the rigors of their high performance engine in any extreme environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 3 transmissions feature: * 1.80 straight-cut gear planetary * 300m input shaft * Lightened steel clutch hub * 6-clutch drum * Race-prepped stock case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Billet dual ring servo * 4340 output shaft * 2-piece shift lever
( 4 )
$2,899.00
—
$3,499.00
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
—
$5,945.00
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 3 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 450 lb.-ft. of torque * 10 in. custom built billet converter with lock-up * Stall: 2,600 to 3,200 * Master overhaul kit with Alto hardened steels * Raybestos Stage I frictions * TransGo reprogramming shift kit with shift command * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * Complete Torrington bearing kit * New bushing kit * New reverse band * Alto Red Eagle wide O.D. band * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Rev. drum with heavy-duty mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly * Expanded capacity overdrive servo * Updated O.D. servo pin * Updated 3rd accumulator piston * Transmission mount * Custom 360-degree adjustable shift linkage arm
Not Yet Reviewed
$7,095.00
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 650 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 4,000 * Custom-built and custom-stalled 10 in. or 11 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Complete Torrington bearing kit * Bushing kit * Thrust washers * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * 5-pinion heavy-duty front and rear planetary gear sets with sun gear * Hardened output shaft * Hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber wide 2-4 band * New internal wiring harness with new TCC solenoid * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New electronic speed sensor * New valve body spacer plate * New OE steel transmission pan * Transmission mount
( 2 )
$5,945.00
—
$6,945.00
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
—
$5,445.00
TeraFlex Tera30 HD front axle housings are heavy-duty with axle tubes, bracketry, and forged inner knuckles, as well as pre-installed inner seals and upper control arm bushings. They are available with or without an ARB air locker, pre-installed ring and pinion gears, and TeraFlex HD ball joints. With the bare HD axle housings, simply transfer your existing internal and outer components to the new housing! Select a kit designed for your Jeep. TeraFlex Tera30 HD front axle: * 3.25 in. O.D. x 0.25 in. wall axle tube increases torsional strength to resist bending * Asymmetric housing design for extra-long tube side strength * Pre-installed inner axle seals * HD forged inner knuckles with greater upper and lower section strength * Ductile cast iron housing with increased rib gussets * HD ductile iron differential cover * Smooth radius bottom design to glide over rocks and obstacles * Integrated lower control arm skid plates * High-flow oil passages and bottom oil drain hole for simple fluid changes * UV protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Integrated factory location upper control arm mount * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped or drilled hole on spring perch for bump stop extensions * Retains all factory ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$2,620.99
GearStar offers level 2, 3, and 4 Ford performance transmissions, custom built by one of their master technicians from start to finish, then dyno tested with converter to the equivalent of 100 miles, ensuring the transmission and converter package is in perfect operating condition before leaving their facility. GearStar Ford 4R70W Level 4 transmissions come fully equipped with a 20,000 GVW cooler, and a variety of customizations geared towards high performance driving. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 750 hp * Up to 550 lb.-ft. of torque * 10 in. custom built, custom stalled, multi-disc forged billet lock-up converter * Stall: 2,600 to 4,500 * Master overhaul kit with Alto hardened steels * Raybestos Gen II Racing frictions * High performance valve body reprogramming kit * New electronics: -- Updated EPC -- Shift solenoids -- Lock-up solenoid -- Internal wiring harness -- Output sensors * High-flow filter * Complete Torrington bearing kit * New bushing kit * New reverse band * Carbon fiber wide O.D. band * 300M hardened intermediate shaft * Heat-treated and stress relived input shaft * High-capacity 4-plate intermediate clutch * Direct clutch pack (eight frictions) * Wide reverse drum with mechanical diode * Updated sun shell and gear * New low spring and roller * High-capacity pump assembly with new gears * Updated O.D. servo pin and piston * Updated dual O-ring 3rd accumulator piston * Custom 360-degree adjustable shift linkage arm * Transmission mount
Not Yet Reviewed
$8,095.00
Not all multi-disc converters are created equal, and with BD Diesel's Triple Torque Force, less is more. To start, BD's in-house CNC-machined cover is designed as one piece, which prevents warping, improper balancing, and leakage. With this design, BD was able to maintain the factory height, thus eliminating the crowding of the pump and the possibility of premature wear. BD Diesel has engineered the dampener for better balancing by riveting it in place, eliminating welding, which can cause warping and affect balance. Each dampener spring is hand-picked to ensure softer engagement. They added notches to the clutch material to prevent fluid adhesion, thus ensuring that even in fluid coupling, the clutches will always have lube. They offer tighter engineered tolerances and a self-centering, 36-external/32-internal, trapezoid-shaped clutch tooth design that enables more contact surface to ensure that the clutch plates properly align, resulting in less friction wear, a longer converter life cycle, and firmer drivability. The clutch plates are also precision-ground flat for smooth operation and consistent wear. Not only will these converters last longer, but they also have 3 times the torque-holding capacity! Triple Torque Force converters come with BD's engineered cast aluminum X-Stator that has fin lengths, angles, and curvatures that are designed to deliver a fluid coupling engine rpm transfer of up to 95 percent, vs. 75 percent with stock stators. This efficiency reduces engine temperatures, increases fuel economy, and better matches the torque curve of the engine, resulting in more torque and horsepower being delivered to the ground. The overall weight of the BD Diesel Triple Torque Force converters has been reduced by 12 lbs. compared to the competition, resulting in better fuel economy and less wear and tear.
( 2 )
$1,624.95
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$298.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,850.00
—
$2,300.00
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$799.00
—
$1,427.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
