Availability
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in 2WD applications. SuperMatic 6L80-E transmissions features include: * 2,400 to 2,800 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
Not Yet Reviewed
$5,182.26
—
$5,569.07
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$439.95
—
$789.95
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,299.95
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in RWD applications. SuperMatic 6L80-E transmissions feature: * 3,000 to 3,400 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
( 2 )
$5,182.26
On Sale
More beef? You bet! Artec Industries adds even more muscle to your super-tough Dana 80 rear axle with their super-tough trusses. Precision CNC-cut and bent, these form-fitting trusses are built with 3/8 in. thick mild steel truss tops and 1/4 in. mild steel ram mounts and gussets to deliver maximum strength. You fly through the air, you land, the ground pushes up, and your truck pushes down---something has to give ... well, it won't be your Dana 80 axles reinforced with trusses from Artec Industries!
( 1 )
$419.99
$314.99
Chevrolet Performance SuperMatic 10L90-E transmissions offer a technologically advanced balance of performance and efficiency when matched with LT crate engines, including the LT1, LT4 and LT5. The kits feature a slip yoke-type tail shaft, allowing it to be used with the conventional prop shaft design used in most older vehicles. Additional highlights: * Electro/hydraulic controls with clutch-to-clutch shifting * Four gearsets and six clutches: two brake clutches and four rotating clutches * 7.39:1 overall gear ratio spread * Aggressive 4.70:1 first gear for enhanced off-the-line performance * Three overdrive gears, with 0.64:1 top gear ratio * Output torque rating of 650 lb.-ft. * Includes torque converter and controller * Includes cooler line adapter with 6AN fittings * Includes production-style vent tube
Not Yet Reviewed
$6,283.70
Moser Engineering 12-bolt GM housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without modifications. They include a steel housing, an axle shaft set with wheel studs, bearings, and a drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser 12-bolt GM housing and axle packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$4,494.00
Moser Engineering 9 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your vehicle without any modifications. They include a steel housing, an axle shaft set with wheel studs, and bearings. You can order them with brakes, or to fit your OEM brakes or a specific brake kit. Available in a multitude of options, these packages are a perfect fit for your everyday driver or performance vehicle.
Not Yet Reviewed
$1,331.00
—
$3,114.00
These Moser Engineering Dana 60 housing and axle packages give the freedom to choose components you prefer, while still fitting your vehicle without any modifications. They include a steel housing, axle shaft set with wheel studs, bearings, and drain plug. You can order them with brakes, to fit your OEM brakes, or a specific brake kit. Available in a multitude of options, the Moser Engineering Dana 60 housing and axle packages are a perfect fit your everyday driver or performance vehicle.
Not Yet Reviewed
$3,316.00
—
$5,314.00
Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket
( 2 )
$1,712.00
FTI Performance TH400 Level 4 transmissions feature a full manual valve body equipped with a transbrake for the ultimate drag racer. They make an excellent choice for weekend bracket racers, high-powered street cars, and mud trucks. The transmissions have: a 34-element intermediate sprag, performance clutches and steels, high-flow pump, race-prepped stock case, deep aluminum pan, billet forward clutch hub, heavy-duty intermediate retainer, and a 4-clutch intermediate pack. Some models are compatible with Ultra Bell bellhousings.
( 13 )
$3,975.00
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$4,182.95
—
$4,575.95
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 320 )
$901.99
—
$1,202.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
