Availability
Showing In Stock Items. Show All 70 Items.
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,930.00
Hook up to your GM manual transmission with Advance Adapters Gen III/LS Series flywheel and clutch kits. These conversion kits contain custom clutch components designed to adapt the Gen III/LS Series to your GM manual transmission. The flywheel is specially designed for the included high performance LUK clutch components. Do you have a special conversion? Advance Adapters LS series Gen III manual transmission conversion kits make change easier. Features include * Custom flywheel * 11mm flywheel bolts * 11 in. pressure plate and disc * Pilot bushing spacer * Throwout bearing * 10mm bellhousing bolts * 10mm lockwashers * XRP dowel bolts
( 4 )
$888.00
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,700.00
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$589.99
—
$811.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$741.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 14 )
$689.99
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
XClutch Stage 2 clutch kits offer performance upgrades for both street and track applications. Designed in-house, XClutch utilizes the latest ceramic technology in their Stage 2 kits offering either a cushioned or a sprung-style friction disc. They are mated with a high performance pressure plate and are recommended for vehicles requiring a higher level of torque holding and heat capacity. Features: * 1C cushioned ceramic—the discs offer a dampening layer between the two friction surfaces which is clamped together as the force of the pressure plate is exerted on the disc. This dampening along with a sprung hub offers drivability despite the ceramic friction surface. These kits are ideal for track cars that require some drivability or very high-horsepower street vehicles that require the added heat capacity of the ceramic friction material. * 1B sprung ceramic—these friction discs offer a sprung center to allow for drivability and are specifically designed for track use with minor street use. The kits offer great heat capacity due to the ceramic friction material and are available for a wide range of performance vehicles.
Not Yet Reviewed
$975.15
—
$1,690.90
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$999.99
—
$1,599.99
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
—
$2,175.00
Trail-Gear Rock Assault True Width Tacoma axle assemblies offer ground clearance to roll over any terrain. Their exclusive design is built with all-new components and state-of-the-art, 3-D digital imaging to ensure that the housings are 100 percent straight and true. The build of these axle housings delivers increased clearances under the axle tubes and differential, as well as increased strength to handle the stresses of heavy loads. They're available in your choice of bare tubes, models with spring perches installed, or a 3-link ready with a panhard bracket. Climb to new heights with the added clearance and strength provided by Trail-Gear Rock Assault True Width Tacoma axle housing kits. Features: * Forged strong 1035 steel knuckle balls—eliminates closed, bent knuckles * 5/16 in. thick 1020 DOM axle tubes—offset above the housing centerline so the inner axles ride near the bottom of the axle tubes, rather than center * Heavy-duty, press-formed 1/4 in. steel plate center section—shaved to create additional clearance under differential * 1/2 in. plate steel differential mounting surface—assurance that studs cannot pull out * Includes both 30-spline chromoly short and long axle shafts
( 2 )
$1,499.99
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$870.25
—
$2,702.65
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
—
$2,175.00
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 44 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for heavy off-road use with up to 37 in. tall tires. They feature reinforced nodular iron center sections, heavy-duty 3 in. axle tubes, and heavy forged knuckles (front only), that prepare your rig for adventure. And their use retains the stock axle width, as well as the factory 5 x 5 in. wheel lug pattern, so you can keep those great new wheels you already purchased. Upgrade strength, reliability, and functionality without busting your budget; replace your stock axles with Currie 44 crate axles.
( 1 )
$5,350.00
—
$6,100.00
Beef up your GM chassis for less with 9 in. non-floater offset housing kits from Allstar Performance. These kits fortify your 1978-88 GM intermediate chassis with much stronger Ford 9 in. style. Allstar offset housing kits are delivered with 31-spline axles with bearings and seals installed, a select used center section, and new axle tubes with large-bearing late Ford/Torino-style ends. Choose between two available lengths. Give your GM rear-end some brawn with non-floater offset housing kits from Allstar Performance.
( 1 )
$999.99
—
$1,169.99
Years after releasing their successful Rock Assault 9 axle housing, Trail-Gear decided to add a Toyota 8 in. version to the Rock Assault lineup. This housing is built to the same specifications as the Rock Assault 9 axles; however, they're built to accept the popular Toyota 8 in. differential. These housings have been tested in W.E. Rock, CalRocs, and King of the Hammers—so you know they'll stand up to the toughest terrain on earth. Trail-Gear started with a 1/4 in. thick formed shell for the center section made from A36 steel. This is a high-strength, low alloy, structural steel plate with a minimum yield strength of 36,000 psi. All of this is attached to an equally strong 1/2 in. thick faceplate for anchoring the DOM axle tubes. The axle tubes are secured by the industry's first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Trail-Gear also faces the center section to ensure your differential mounts flush against the axle housing to prevent any leaks. Rock Assault Fabricated 8 Housings are offered with 3.5 in. O.D. axle tubes with your choice of 1/4 in. or 3/8 in. wall thickness. NOTE: The housing is shipped with no ends. Housing ends must be sourced and installed to complete axle. Portal style ends are commonly used for this application.
Not Yet Reviewed
$1,199.99
—
$1,499.99
Beef up your rear-end with Trail-Gear Rock Assault rear axle housings. Better trail performance comes in the shape of fabricated, thick steel center sections and differential mounting surfaces, heavy-duty DOM axle tubes, and 4130 chromoly flanges. Plus, Trail-Gear engages the tubes further into the center section, with a 360 degree gusset welded around the tubes on the inside of the housing, to ensure that your rig is strong enough to go wherever you want! Rock Assault's overall design also offers additional clearance under the axle tubing and differential, providing more height to climb over those big boulders. Outfit your rig to be extremely tough with the rugged, high-clearance design of Trail-Gear Rock Assault rear axle housings.
( 1 )
$1,199.99
—
$1,499.99
Trail-Gear Rock Assault front axle housings give you clearance to go where you want and the muscle to do it! Their strength comes from heavy-duty, press-formed, 1/4 in. plate steel center sections; 1/2 in. plate steel differential mounting surfaces; 5/16 in. thick 1020 DOM axle tubes; and forged 1035 steel knuckle balls. Trail-Gear's knuckle balls are stronger than stock, so there are no worries of them becoming closed or bent. And, the thicker differential mounting surface ensures that the studs cannot pull out, even under heavy loads. Trail-Gear's design—offset tubes and shaved center section—provides you with added clearance to climb the high country. Plus, since housings are precision-aligned with computer imaging, you can rest assured they're 100 percent straight and true. You have a choice of bare tubes, or with spring perches installed—or 3-link ready with a panhard bracket included. You're equipped to attack any terrain with Trail-Gear Rock Assault front axle housings.
( 1 )
$1,499.99
Trail-Gear Rock Assault left hand drop front axle housings offer clearance for your Tacoma left hand drop T-case. Forged 1035 steel knuckle balls, 1020 DOM axle tubes, and heavy-duty plate steel center sections and differential mounting surfaces offer tremendous strength to take on any terrain. The axle housings are precision-aligned to ensure that your Rock Assault is straight and true. They're available bare or with spring perches installed. Add the strength to go anywhere with the special fit of Trail-Gear Rock Assault left hand drop front Tacoma axle housings.
Not Yet Reviewed
$1,499.99
Competition Engineering one-piece fabricated rear axle housings are CAD-designed and CNC-machined to be stronger and lighter than other styles. Their triangulated design provides the structural integrity required for racing. Made from chromoly or mild steel, the outer shell is 1/8 in. thick, and the faceplate is 1/4 in. thick. Configured for a 9 in. Ford, the housings come in either full-bodied car style, with cut-to-length 3 in. O.D. x .250 in. wall axle tubes, or dragster style, with big Ford forged housing ends aligned with the center section. The full style has an overall width of 60.75 in., the dragster style is 27.6 in. wide, and the faceplate accepts 3/8 in. studs. A drain plug, filler plug, and breather bung are included.
( 1 )
$840.99
—
$997.99
Need reinforcement? Artec Industries Ford 9 in. rear axle trusses support and strengthen your rig's rear-end. These uniquely designed trusses are built with 1/4 in. thick truss tops and 10-gauge thick gussets to add muscle and provide a flat link mounting surface. They're able to nearly fit any 9 in. housing--whether slightly offset or centered, the fit is still universal. Simply trim out the shape of the center section and fit them on. They are low-profile and span the entire length of the axle for complete fortification. Artec Industries trusses bolster your Ford 9 in. rear axle with the stamina to take all off-road abuse.
Not Yet Reviewed
$229.99
Stock rear-ends are typically built with a non-floating design--and because your wheels are bolted to the axle, if the C-clip fastener or axle happens to break, you could lose a wheel. By contrast, Allstar Performance 9 in. floater housing kits are a safer and more versatile replacement option. These steel stock housings are available in a variety of widths, centered or offset. They're jig-welded for proper alignment and feature a differential center section and wall axle tubes with spindle pins, plus gear case mounting studs and fill and drain plugs. (Depending on the kit you order, additional components may be included.) Select the size needed for your application, and then improve your axle setup with a floater housing kit from Allstar Performance.
Not Yet Reviewed
$499.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$6,050.00
—
$7,750.00
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
