Availability
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 44 )
$2,999.99
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
All Balls Racing Stealth drive prop shafts are dynamically balanced to reduce noise, vibration and lengthen the time between servicing. These fully assembled prop shafts feature phased pairs that include a carrier bearing or a one-piece design to reduce cost, ease assembly, and provide a complete ready-to-install repair solution right out of the box. All Balls Stealth replacement driveshafts are designed with the same dimensions as the OEM units for guaranteed fitment—and also feature greaseable U-joints for increased life. Order the model recommended for your UTV application.
( 2 )
$303.00
Zoom MU Series clutches are OEM replacement clutch kits that provide more grip without the stiff pedal of most aftermarket clutches. Matched components are engineered to perform together correctly for maximum durability and performance. Select the model for your application needs. Features: * New OEM computer-tested pressure plate * OEM-style clutch disc with non-asbestos facings built to exceed the OEM specs * New release bearing on some applications * Pilot bearing/bushing * Alignment tool for the perfect clutch installation
( 239 )
$321.99
—
$666.99
On Sale
McLeod Racing offers several different clutch kit configurations based on your specific need and application. Their Adventure Series provides clutch solutions for the trail-ready, daily driven, and off-road market. McLeod Trail Extreme Packs are aimed towards serious truck and off-roaders with engine mods, increased vehicle weight, and larger tires from 37 in. and up. Ideal for those with a wilder adventure in mind, the kits include a Trail Extreme Pack ceramic/ceramic disc and Max Mass 45 lb. steel billet flywheel for improved drivability on the road and off. Designed and engineered for your next adventure, McLeod Adventure Series Trail Extreme Packs are your best choice for a street friendly yet trail proven clutch to hold big power or a lot of weight. Choose the kit designed for your Jeep. Also includes: * 11 in. diaphragm HD pressure plate * 11 in. self-aligning sprung hub disc * Billet internal hydraulic bearing that increases clutch travel and replaces the factory "problematic" plastic slave cylinder * ARP pressure plate bolts * Hydraulic lines * Block-off plate * Bleeder/line connector * Alignment tool
Not Yet Reviewed
$865.00
—
$1,295.00
$778.50
—
$1,165.50
On Sale
McLeod Racing offers several different clutch kit configurations based on your specific need and application. Their Adventure Series provides clutch solutions for the trail-ready, daily driven, and off-road market. McLeod Trail Pro Packs are aimed towards occasional off-roaders or dedicated trail enthusiasts with mild engine mods, increased vehicle weight, and larger tires. The kits include Trail Pro Pack organic/ceramic disc for smooth and even engagement with increased holding power over stock, and Max Mass 45 lb. steel billet flywheel for improved drivability on the road and off. McLeod Adventure Series Trail Pro Pack clutch kits are great choices to upgrade to a street friendly yet trail capable clutch. Choose the kit designed for your Jeep. Also includes: * 11 in. diaphragm HD pressure plate * 11 in. self-aligning sprung hub disc * Billet internal hydraulic bearing that increases clutch travel and replaces the factory "problematic" plastic slave cylinder * ARP pressure plate bolts * Hydraulic lines (where applicable) * Block-off plate (where applicable) * Bleeder/line connector (where applicable) * Alignment tool
Not Yet Reviewed
$775.00
—
$1,255.00
$697.50
—
$1,129.50
On Sale
McLeod Racing offers several different clutch kit configurations based on your specific need and application. Their Adventure Series provides clutch solutions for the trail-ready, daily driven, and off-road market. McLeod Super Trail Pro Packs are aimed towards serious truck and off-roaders with engine mods, increased vehicle weight, and larger tires from 37 in. and up. Ideal for those with a wilder adventure in mind, the kits include a Super Trail Pro Pack organic/ceramic disc and Max Mass 45 lb. steel billet flywheel for improved drivability on the road and off. Designed and engineered for your next adventure, McLeod Adventure Series Super Trail Pro Pack clutch kits are your best choice for a street friendly yet trail proven clutch. Choose the kit designed for your Jeep. Also includes: * 11 in. diaphragm HD pressure plate * 11 in. self-aligning sprung hub disc * Billet internal hydraulic bearing that increases clutch travel and replaces the factory "problematic" plastic slave cylinder * ARP pressure plate bolts * Hydraulic lines * Block-off plate * Bleeder/line connector * Alignment tool
Not Yet Reviewed
$835.00
—
$1,295.00
$751.50
—
$1,165.50
Advance Adapters offers an AX15 5-speed transmission retrofit adapter kit for 1966-77 Bronco Dana 20 applications. The adapter kit comes complete with the conversion components required to retrofit your early Ford Bronco with the Aisin AX15. Kit includes: * New AX15 transmission * Transfer case adapter and transfer case shifter linkage bracket (T-style shifter only) * Transmission to engine adapter * Clutch disc * Crossmember mount kit * Shifter handle * The Transmission: This transmission is manufactured by Aisin Warner. The overall transmission case length is 24.000 in. The output shaft on this transmission is 23-spline and protrudes approximately .400 in. This transmission is normally found coupled to the AMC 4.0L 6-cylinder engine and seems to be one of the better transmissions Jeep used—very capable of handling the horsepower and torque of a V8 engine. * The Vehicle background and specs: The early Ford Broncos have always been a popular vehicle for conversions. These vehicles were normally equipped with a 6-cylinder or V8 engine up to a 3-speed transmission. On this transmission, Ford used two different lengths of adapter housings when coupling this 3-speed to the stock transfer case. The adapter housing is either 6 1/2 in. or 9 3/8 in. Vehicles equipped with a V8 had a 9 3/8 in. tailhousing which set the bellhousing further into the engine compartment. Vehicles with the 6-cylinder had a 6 1/2 in. tailhousing. This shorter adapter compensated for the longer engine. In 1973, Ford began offering the C4 automatic. A special tailhousing and output shaft was manufactured to couple this transmission to the stock transfer case. Ford no longer makes the C4 adapter. The 1966-77 vehicles were equipped to a Bronco Dana 20 transfer case. This transfer case, unlike the Jeep Dana 20, has the front driveshaft on the driver's side of the vehicle. The input gear of this transfer case is 6-spline. Ford always used a spud shaft that coupled this 6-spline transfer case to the transmission 28-spline. The transmission-to-transfer case adapters used both a dowel pin and alignment retainer. The spud shaft is supported in this retainer with a bearing. Advance Adapter adapter kits utilize this type of design. In some applications, the stock spud shaft is also retained. This transfer case has a 2.46:1 low gear ratio. In early 1973, Ford switched to a 2.34:1 low gear ratio. These transfer cases used two different shifter designs known as either the "J" pattern or "T" handle. The "T" handle was used from 1966 to 1972, and the "J" pattern from 1973 to 1977. The "T" handle shifter is a fairly simple shifting mechanism; and to retain it with an adapter only requires a pivot point for mounting. The "J" shifter requires the shift handle to be mounted in a location relatively close to its stock position. Retaining this shifter is hard to accomplish when adapting the various transmissions to the Dana 20. Vehicle owners with a "J" shifter are advised to either change the transfer case shifter rods and go to a "T" style shifter, or to contact one of the Bronco specialty shops that offer a twin stick replacement for the "J" shifter. A twin stick shifter replacing the "J" style should work with most of Advance adapters. Advance Adapter housings normally utilize the stock Bronco crossmember with the stock rubber supports. On new transmission assemblies longer than stock, this crossmember may need to be relocated. There are a few adapters that require this crossmember to be modified. These modifications are noted in detail on the specific adapter instruction sheet.
Not Yet Reviewed
$3,141.50
These Perfection ZVT Variable Torque Performance clutches put the power to the wheels when you need it most. These clutches add clamp load by applying centrifugal force to the pressure plate as engine rpm increases. Each ZVT clutch kit is designed with consideration to your vehicles peak torque and horsepower range. Includes pressure plate, disc, throw out bearing, and installation tool.
( 1 )
$573.99
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$1,217.95
$1,096.16
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$511.99
—
$990.99
On Sale
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 231 )
$879.00
—
$995.00
$791.10
—
$895.50
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 305 )
$1,217.95
$1,096.16
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$869.24
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$705.81
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$811.22
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$1,024.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
