Availability
Showing In Stock Items. Show All 12 Items.
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$589.99
—
$811.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$741.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 14 )
$689.99
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
Spicer Drivetrain Products one-piece aluminum driveshafts improve acceleration, eliminate flexing and annoying clunks, and reduce the rotating mass of factory 2-piece driveshafts. Constructed from 6061-T6 aluminum tubing for strength, these replacements are lighter so your car can accelerate faster with a smoother, quieter ride. Order the model recommended for your transmission application. Features include: * Reduced overall weight and rotating mass of the driveline * Eliminates the need for a center bearing * Direct bolt-in with no need for an adapter * Available in a variety of lengths and diameters * Larger diameters allow for higher rpm with less noise, vibration, and harshness * 0.125 in. wall thickness * Includes hardware
( 8 )
$848.99
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 195 )
$452.99
—
$469.99
Stock driveshafts get power to the axles, but they aren't designed for tough off-road use. Yukon Gear & Axle performance driveshafts feature stronger tubing to help prevent bending or wear that could cause the shafts to become unbalanced. They include heavy-duty hardware, transfer case yokes, and either 1310 or 1350 U-joints. For better off-road protection, upgrade to Yukon Gear & Axle performance driveshafts, available in many sizes and options for applications from 2007 and up.
( 1 )
$572.99
—
$1,300.99
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. They're engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. OE fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model recommended for your vehicle.
( 30 )
$251.99
—
$695.99
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 317 )
$774.99
—
$1,496.99
Get moving with Summit Racing™ driveshafts. They are drawn-over-mandrel steel tube assemblies with a transmission slip yoke. Our tube and yoke assemblies are available in three transmission joint styles, including various U-joint options for your restoration job. Bolt on Summit Racing™ driveshafts for smooth handling to keep yourself on the road and between the lines.
( 15 )
$311.99
—
$379.99
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$551.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
