Availability
Showing In Stock Items. Show All 201 Items.
Mr. Heater Big Maxx garage heaters will give you some much-needed heat in your garage or shop. Highly efficient and cost effective, these unit heaters are available for both propane and natural gas fuel sources with easy installation and quiet operation for your workshop or warehouse. Mr. Heater Big Maxx heaters are CSA certified and can be mounted up out of the way leaving you valuable floor space. Work in warmth all winter long; install a Mr. Heater Big Maxx heater.
( 15 )
$499.99
Edwards Ironworkers portable power units are an additional power source for your Edwards PowerLink Hydraulic Tools. With several different power options, the portable power units are compact, mobile, and set up to accommodate all of Edwards' quick-connect Hydraulic Accessory Tools. The units are available in 1-Phase and 3-Phase models, with a variety of voltage/power choices.
Not Yet Reviewed
$5,258.99
—
$5,747.99
Edwards Ironworkers' 20-ton shop presses may be small enough to fit on your work bench, but they're no lightweight. Smooth and precise, heavy-duty and versatile, their unique open side design allows for material to pass through. Power them up with an Edwards factory-installed PowerLink System or an Edwards portable power unit (230 or 460 V). Additional product features: * Compact and powerful benchtop press * Heavy-duty 3/8 in. steel construction * Cylinder with 2 in. Ram and 6 1/4 in. stroke * Rolling cylinder for maximum versatility * Working Area of 10 1/2 in. x 20 in. * Easy-to-use hand/jog controls * Quick-disconnect hoses * Hydraulic-assist table height adjustment (Also check out Edwards' 12 in. press brake tooling, bump-die tooling, the 6-piece press tooling set, and the press brake back gauge, available separately.)
Not Yet Reviewed
$4,797.99
—
$9,301.99
The Edwards Ironworkers 60-Ton Shop Press solves a variety of demands to improve user productivity. Smooth and precise, and both heavy-duty and versatile, the unique, open side design allows for material to pass through. Power it up with a factory installed PowerLink System or an Edwards Portable Power Unit. Additional product details: * Easy-to-use foot pedal * Versatile rolling cylinder * Working area of 42 in. x 39 in. * Pressure gauge * Quick-disconnect hoses * Hydraulic-assist table height adjustment * 2 V-Blocks included With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out Edwards' bump-die tooling, the 6-Piece Press Tooling Set, and the Press Brake Back Gauge. Also available with PLC (Programmable Logic Control) to improve your productivity on repeatable actions. Provides adjustable up/down stroke control saving time. Adjustable PSI allows the user to set the pressure and cycle the press with an automatic return. Magnetic base allows easy mounting of the PLC anywhere on the machine.
Not Yet Reviewed
$14,810.99
—
$19,683.99
The Edwards Pipe, Tube and Section Radius Roller is another essential quick-connect hydraulic tool. Plug it into your Edwards Ironworker with the PowerLink System—or power it separately with an Edwards Portable Power Unit to greatly expand your fabrication capabilities. Designed for medium to heavy material, the Radius Roller powers through your job quickly and accurately. Its variable speed hydraulic drive allows you to dial in the appropriate speed for various materials. Quickly change the orientation from vertical for smaller projects to horizontal for those larger, heavier jobs.
Not Yet Reviewed
$11,256.99
—
$15,956.99
Edwards Ironworkers offers 60-Ton Shop Presses with PLC (Programmable Logic Control) to enhance productivity. PLC improves press accuracy with precision pressure and increased efficiency with automatic returns, creating shorter cycle times—up to 50 percent time savings. Set your pressure with adjustable PSI. The magnetic base allows for easy mounting of the PLC anywhere on the machine. These machines are a perfect fit for shops that produce repeatable pieces that cannot justify a fully automatic press brake. Additional product details: * 1/2 in. and 3/4 in. heavy-duty steel construction * Easy-to-use foot pedal * Versatile rolling cylinder * Working area of 42 in. x 39 in. * Pressure gauge * Quick-disconnect hoses * Hydraulic-assist table height adjustment * 2 V-Blocks included With the Press Brake Tooling, your Shop Press easily becomes a brake. Check out Edwards' bump-die tooling, the 6-Piece Press Tooling Set, and the Press Brake Back Gauge. Edwards' 60-Ton Shop Press solves a variety of demands to improve user productivity. Smooth and precise, and both heavy-duty and versatile, the unique, open side design allows for material to pass through. Power it up with a factory installed PowerLink System or an Edwards Portable Power Unit.
Not Yet Reviewed
$19,110.99
—
$24,672.99
With 20 tons of force, Edwards horizontal shop presses accept a great variety of tooling to form, brake, and straighten mild steel. These compact powerhouses quickly connect to your Edwards Ironworker with a PowerLink System or Edwards portable power unit (230, 460, or 575 V) to greatly expand your fabrication capabilities. Designed for maximum tooling flexibility, the four pin locations are locked with a simple crank for inboard tool squaring. The included digital encoder reads positive stop for accurate repeatability. The potential of these horizontal shop press tools is only limited by your imagination.
Not Yet Reviewed
$12,138.99
—
$17,772.99
The Edwards Ironworkers 10-Ton Bender is a quick-connect hydraulic tool that greatly expands your fabrication capabilities. Designed for medium to heavy material, this versatile machine powers through 2 in. (I.D.) Schedule 40 pipe, 2 1/2 in. (O.D.) tube, and 2 in. square tube quickly and accurately. (Choose from Edwards' 280+ standard Bender Die Sets to get your job done, all sold separately.) Additional details: * Plug-and-play operation * Horizontal or vertical operating positions * Proximity switch allows easy, repeatable bends * Heavy-duty rolling stand * Easy-to-use hand/jog controls
Not Yet Reviewed
$9,027.99
—
$9,576.99
Summit Racing™ oil drains offer a safe, affordable solution for draining and transferring oil. These self-evacuating units are height adjustable and portable for ease of use. The tanks are constructed from heavy-duty steel for strength and durability. Each oil drain also includes the regulator, gauge, filter screen, and evacuation hose.
( 60 )
$199.99
Pull an engine, lift a cab, move heavy shop equipment, load your truck—the possibilities are endless with this 2,200 lb. capacity Summit Racing™ gantry crane! The all-steel unit adjusts from 94 1/4 in. to 141 1/2 in. in height to adapt to different jobs, and spans 94 in. to accommodate the widest vehicles. It rolls smoothly on four rubber-coated 5 in. locking swivel casters, and disassembles quickly (without tools) for storage and transport. The I-beam measures 3 in. wide by 4 3/4 in. tall, and the crane base is 47 1/4 in. wide.
( 23 )
$729.99
On Sale
Traxion NXT Topside Creepers are the perfect solution for auto technicians who want to increase productivity and safety while working from the topside of the engine compartment. With their adjustable padded deck, the creepers offer a comfortable and stable surface for mechanics to rest on while reaching under the hood. The I-Base design of each creeper allows for flexible positioning around the vehicle, making it easier to access hard-to-reach areas. These creepers also feature four rolling casters that slide easily around the shop or garage. Two of the casters lock in place to ensure that the unit is properly positioned, providing the user with the safety and leverage needed to get the job done right. When not in use, NXT Topside Creepers conveniently fold flat for easy and compact storage. Additional details: * Ergonomic design with durable padded deck allows for improved productivity over longer periods of time * Padded deck is comfortable and easy to clean * Dimensions when folded: 4 ft. long x 2 ft. 8 in. wide x 11.5 in. high
( 24 )
$298.99
$269.09
Versatile and tough enough for both professionals and do-it-yourselfers, Summit Racing™ parts washers are constructed of heavy-duty steel with fully adjustable flexible nozzles, component shelves, easy-to-maintain solvent pumps that flow up to 50 gph, and reliable 120 V motors. The washer units are available in multiple sizes to accommodate your needs.
( 89 )
$169.99
—
$240.99
On Sale
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$7,204.82
$3,522.49
—
$6,844.58
OTC heavy-duty Motor-Rotor repair stands put a better spin on maintenance of your engines, transmissions, torque converters, and rear axles from your trucks, tractors, and construction machinery. Featuring a 50:1 ratio gear box, these steel stands allow for a full rotation of mounted units with just a turn of the crank and they lock in position. The positive-crank handle locking mechanism ensures engine stability in all positions, and locking rear wheels anchor the stands in position. These extremely stable work-holding units have a twin-post design featuring laterally adjustable, 3-position outboard support. Work safely, more efficiently, and more comfortably standing beside OTC Tools heavy-duty Motor-Rotor repair stands.
( 2 )
$2,119.99
Summit Racing™ bead rollers are metal forming tools that are ideal for sheetmetal fabrication work. Whether you're a beginner or a professional fabricator, these bead rollers are easy to use. Simply mount one of the units in your vise, attach the crank handle, and you're on your way to raising flanges and ridges in floor panels, firewalls, doors, and more. They can form metal up to 18-gauge and 34 in. wide. Dies are included.
( 25 )
$200.99
Summit Racing™ portable tool cart workstations are a great option for those in need of mobile tool storage. These mobile workstations combine a sturdy steel construction, drawer storage, a bottom shelf for tools and equipment, and are equipped with four rolling caster wheels for easy movement—two of the casters lock in place to keep the unit stationary. Product features and specifications include: * Ideal in either an auto repair shop or as a garage rolling tool cabinet * Provides additional storage you need for small to medium sized items * Sturdy steel construction * Attractive black finish and features Summit Racing Equipment® logo * Two drawers—one with standard lock to quickly secure tools or other valuable items * Bottom shelf provides additional storage for tools and equipment * Side handle allows you to easily steer the unit around your facility with ease * Four 4x4 rubber casters—two caster with locking function * Overall dimensions—30 3/4 in. W x 14 1/2 in. D x 32 5/8 in. H * Total weight capacity of 300 lbs.
Not Yet Reviewed
$199.99
The Milwaukee M18 PACKOUT with VACLINK 9-gallon Dual Battery Dust Extractors set the standard for cordless dust extractors with strong performance and unmatched versatility. The automatic filter cleaning mechanism provides the highest sustained airflow to maintain productivity during dust extraction applications. This mechanism, paired with two HEPA filters, delivers OSHA Table 1 Compliance. The dust extractor tools have versatile power with corded and cordless capabilities for all-day productivity. With VACLINK, an integrated wireless dust control technology, compatible tools and remotes connect to the dust extractor, allowing for activation from the dust-producing application for increased efficiency. The POWERSTATE brushless motor delivers 125 cfm when utilizing M18 batteries (included in kit only) and 175 cfm when the unit is plugged-in. Two M18 REDLITHIUM FORGE HD12.0 batteries are required for operation (only included in the full kit with M18 charger). Please specify if ordering just the tool or if ordering the full kit with the included M18 batteries and M18 Dual Bay Simultaneous Super Charger. Product Highlights: * Optimized for concrete dust, drywall dust, and sawdust, the low flow indicator communicates if flow drops below optimal performance * Also capable of wet clean-up, water sensors indicate if the tank is full * Included 36mm x 10 ft. anti-static hose and attached hose clip connect to included power tool and table saw adapters that allow for efficient dust collection when paired with other tools * This extractor is PACKOUT compatible for convenient transportation and storage and offers ONE-KEY track and manage compatibility Bare Tool comes with the following components (except REDLITHIUM FORGE HD12.0 batteries and M18 Dual Bay Simultaneous Super Charger, included in full kit only): * M18 FUEL 9-gallon Dual Battery Dust Extractor with PACKOUT Compatibility and VACLINK * VACLINK Wireless Dust Control Remote * HEPA filter (2-pack) * 10 ft. Accessory Hose * Fleece Dust Bag * Power Tool Adapter * Table Saw Adapter
Not Yet Reviewed
$899.00
Convenience and quality come together in the design of B-G Racing's sturdy wheel and tire trolleys. Equally practical for transport in the pit and paddock, the trolleys are also great for storage back at the workshop. These shop carts are manufactured from high-grade mild steel with a durable gray powdercoat finish; and demountable tire-friendly round crossbeams reduce marking of tires. The units are available in 1300mm, 1500mm, or 1600mm internal lengths. The height of the top beams can be adjusted in three positions, depending on the diameter of the tires, and to reduce the overall trolley height. B-G trolleys also feature two fixed and two fully-rotating, locking and braking castor wheels, designed for strength and ease of movement around the pits, the paddock, workshop, and garage.
( 1 )
$770.27
—
$917.50
iDEAL Equipment single column service lifts are innovative 2,000 lb. single column, high-rise, multi-use storage and service lifts, incorporating a multi-adjustable platform design with multi-directional front and side vehicle loading for most ATVs, UTVs, golf carts, and riding and zero-turn mowers. The low-profile platforms incorporate spring-loaded quick-release/locking nylon rollers and brackets mounted to the underside of each platform, making adjustments of the platform's width fast and easy. Each platform is secured to the bolster via HD lock pins and retainer brackets once the desired platform width is set. For additional space saving benefits, the power unit can be easily mounted to either the front, side, or rear of column providing the best fit in your shop or garage. In addition, the iDEAL single column UTV and mower storage/service lifts come standard with a durable powdercoat finish, eight multi-position side ramps, wheel stop "pivot" ramps with protective nylon rollers, and quick removal tubular wheel stop bars for platform sides. Easy lift operation is provided with a high-quality electric/hydraulic 115V DURO power unit, a HD hydraulic chain-drive cylinder, and a single-point manual lock release with 20 different locking height positions.
Not Yet Reviewed
$4,890.00
Powerbuilt U-Jack floor jacks eliminate the hassle of placing a jack stand at a factory-approved lift point on your car or truck. Each U-Jack unit features a patented saddle with a slot that fits the mast saddle of virtually any jack stand on the market. Simply jack up your vehicle with U-Jack, place a jack stand in the saddle slot, then lower and remove the U-Jack. It's that simple! When you're finished, just reverse the process. They can also be used just like a regular floor jack. Save time and hassle when doing your own service and repairs—like brake jobs, tire rotations, and wheel swaps—with Powerbuilt U-Jack floor jacks. Additional features include: * Lifting range from 4 1/2 to 18 3/4 in. * 2-ton lift capacity * Strong ultra-wide chassis for extra stability * Stylish, dependable, and affordable; Powerbuilt products meet or exceed ASME and PALD standards
( 5 )
$299.99
Lenco 120 V portable dent-pulling systems simplify the repair of auto body dents. No holes to drill, no more draw pins to cut and grind! With LencoPull units, you just weld the star tip to the damaged panel by pressing the trigger, then pull out the dent, and twist the tool to remove ... you're done! These systems have their own specially-designed transformers and can make multiple pulls without changing tools. Let Lenco save you valuable time and money with their portable dent-pulling systems. LencoPull 120 V system features include: * Built-on slide hammer for one-step operation * Heat-shrinking tip * 7 ft. welding and ground cable leads * 25 ft. power cable
Not Yet Reviewed
$931.99
John Dow portable oil and fluid dispensers are built for motor oil, synthetic oil, ATF and other light fluids. Available in different capacities, these versatile dispensers are completely mobile with air pressure charge. Features include: * Heavy-duty steel construction * No continuous air supply required after unit is pressurized * Completely portable * Sight tube shows tank fluid level * Pressure gauge and relief valve ensure proper pressurization * 2 in. spout with cap for easy filling * Includes delivery gun with flexible spout * 6 1/2 ft. delivery hose * 5 gallon model has two 4 in. swivel caster on rear * 15 gallon has four 7 in. fixed casters--front and rear
Not Yet Reviewed
$494.99
Sunex Tools quick lifting floor jacks are heavy-duty service jacks designed for dependable, continuous performance in any automotive service and repair shop. These jacks feature a rapid-rise hydraulic power unit that includes dual pump pistons that raise the lift arm to the maximum height in six full incremental pump strokes. They're made with a strong chassis with upper and lower frame flanges to withstand twisting. Wide front wheels and ball bearing mounted rear caster wheels provide easy maneuverability and stability when jacking. Their angular positioned pump pistons provide maximum pump stroke effectiveness when the jacks are completely under a vehicle. Sunex Tools quick lifting floor jacks also feature pump piston dust shields and wiper seals to prevent contaminants from entering their hydraulic systems. Overload and bypass safety valves prevent the jacks from being used beyond their rated capacity and the overextension of the jack ram. Rubber saddle pads with a grooved surface accept vehicle panel rails to protect the vehicle frame from scratches and provide a sure grip lifting surface. A pump handle protector pad prevents damage to your under-car components and any other vehicles parked close to the jacks.
( 12 )
$364.99
Clear out exhaust fumes from garage service areas with John Dow EuroVent vehicle exhaust extraction systems. Practical and affordable, these portable extractors capture fumes from the vehicle and discharge them safely up to 30 ft. away. Plus, caster wheels allow the units to be moved anywhere needed. Features and benefits include: * 3/4 hp fan produces 330 cfm airflow * Fan is mounted in tough, roto-molded polyethylene "flow-through" case * Mobile base makes the system easy to position behind the vehicle * Height position is controlled by a quick-release, spring-loaded cam * The discharge hose stores neatly when not in use * Optional "Y" hose adapter available for dual-exhaust vehicles (sold separately) * 110 V * 86 lbs. overall weight
Not Yet Reviewed
$1,655.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
